dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
38,561 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

38561 Commits

Author SHA1 Message Date
JaeyoungLim cda7c6ceaa
Enable offboard actuator setpoints 2021-11-07 15:38:42 -05:00
Guilherme Lawless 47a191489e
cmake: sitl_gazebo build use memory information from the system to estimate the parallel jobs 
Using cmake_host_system_information, grabs AVAILABLE_PHYSICAL_MEMORY and adds another job for every 1.5GB of available memory.

This is tested on a single system with 16 logical cores and 16GB RAM (~11.5GB available, reported correctly by cmake).
 2021-11-07 15:37:48 -05:00
Daniel Agar 68026eadeb
save significant IMU bias changes learned by the EKF 
* ekf2: make publishing of learned accel biases more robust
* ekf2: reset accel bias if calibration updated
* msg: add separate accel and gyro calibration counters
* ekf2: use separate accel and gyro calibration counters
* ekf2: rework logic to reset biases when calibration counters increment
* sensors: add saving of learned accel biases
* ekf2: generalized saving accel/gyro/mag in flight sensor calibration
* boards: holybro kakutef7 disable systemcmds/perf and systemcmds/top to save flash

Co-authored-by: Paul Riseborough <gncsolns@gmail.com>
 2021-11-07 15:34:27 -05:00
Jacob Crabill 5969508fa7
mavlink: cmake generate mavlink headers at build time 
- mavlink/mavlink is now directly included as a submodule instead of the generated mavlink/c_library_v2
 - this also switches to mavlink development.xml by default
 2021-11-05 23:01:38 -04:00
Julian Oes 88489ae8bd mavlink: Check target for mavlink shell 
The SERIAL_CONTROL MAVLink message now contains a target_system and
target_component field that we should check.

Without this we might be answering to a command on the network that is
meant for another system.
 2021-11-05 23:48:44 +01:00
David Sidrane 96101a9c11 NuttX backports of imxrt dcache fixes to support WB & USB 2021-11-05 13:50:02 -04:00
David Sidrane af6bedaded nxp_fmurt1062:Needs pwm_out 2021-11-05 13:50:02 -04:00
David Sidrane ff43923567 nxp_fmurt1062-v1:Use Write Back Dcache 2021-11-05 13:50:02 -04:00
David Sidrane dedad87e82 nxp_fmurt1062-v1:Force no no-unaligned-access 
This results in a load saving (no dcache) of 16.82% at a cost
  of 0.03% Flash, .07% XIP Flash and .45% SRAM

Forced Alighment

With: -mno-unaligned-access

Memory region         Used Size  Region Size  %age Used
           flash:      606568 B         7 MB      8.26%
        flashxip:      622920 B         1 MB     59.41%
            sram:      640848 B       856 KB     73.11%
            itcm:          0 GB         0 GB
            dtcm:          0 GB       128 KB      0.00%

 PID COMMAND                   CP
   0 Idle Task                   87640 20.047   204/  748   0 (  0)  READY  3
   1 hpwork                          0  0.000   332/ 1784 249 (249)  w:sig  3
   2 lpwork                         26  0.008   780/ 1616  50 ( 50)  w:sig  4
   3 init                            0  0.000  1980/ 2928 100 (100)  w:sem  3
   4 wq:manager                      0  0.000   508/ 1256 255 (255)  w:sem  4
 327 navigator                     910  0.204  1124/ 1832 105 (105)  READY  6
  23 wq:lp_default                3479  0.795  1252/ 1920 205 (205)  READY  4
  30 wq:hp_default               23554  5.415  1332/ 1904 237 (237)  READY  4
  47 dataman                         0  0.000   820/ 1208  90 ( 90)  w:sem  4
  57 wq:I2C1                     26849  6.190  1060/ 2336 246 (246)  w:sem  4
  60 wq:I2C2                     24045  5.440   732/ 2336 245 (245)  w:sem  4
  86 wq:SPI1                     47127 10.804  1352/ 2336 253 (253)  w:sem  4
  91 wq:I2C3                      1935  0.436   980/ 2336 244 (244)  w:sem  4
 101 wq:SPI3                      6932  1.585  1028/ 2336 251 (251)  w:sem  4
 237 wq:nav_and_controllers      16743  3.832  1236/ 2240 242 (242)  w:sem  4
 248 wq:rate_ctrl                 9008  2.074  1572/ 1952 255 (255)  w:sem  4
 250 wq:INS0                     37182  8.450  4372/ 6000 241 (241)  w:sem  4
 264 commander                   29395  6.732  1260/ 3224 140 (140)  READY  5
 287 mavlink_if0                 60513 13.828  1876/ 2728 100 (100)  READY  4
 294 mavlink_rcv_if0              5946  1.387  1292/ 4560 175 (175)  READY  4
 307 wq:UART5                     3345  0.770   844/ 1632 229 (229)  READY  4
 370 log_writer_file                 0  0.000   372/ 1176  60 ( 60)  w:sem  3
 369 logger                       2121  0.484  2468/ 3648 230 (230)  READY  3
 393 top                         37523  8.641  3060/ 4080 237 (237)  RUN    3

Processes: 24 total, 10 running, 14 sleeping
CPU usage: 77.08% tasks, 2.87% sched, 20.05% idle
DMA Memory: 5120 total, 1024 used 1024 peak
Uptime: 441.946s total, 87.640s idle

Allow Un-Alighment
With Out: -mno-unaligned-access
Memory region         Used Size  Region Size  %age Used
           flash:      604008 B         7 MB      8.23%   8.26%    +0.03

        flashxip:      622240 B         1 MB     59.34%  59.41%    +0.07
            sram:      636752 B       856 KB     72.64%  73.11%    +0.45
            itcm:          0 GB         0 GB
            dtcm:          0 GB       128 KB      0.00%  0.00%

 PID COMMAND                   CPU(ms) CPU(%)  USED/STACK PRIO(BASE) STATE FD
   0 Idle Task                    2418  3.190   264/  748   0 (  0)  READY  3
   1 hpwork                          0  0.000   332/ 1784 249 (249)  w:sig  3
   2 lpwork                         12  0.004   852/ 1616  50 ( 50)  w:sig  3
   3 init                            0  0.000  1932/ 2928 100 (100)  w:sem  3
   4 wq:manager                      0  0.000   548/ 1256 255 (255)  w:sem  4
 327 navigator                      22  0.203  1052/ 1832 105 (105)  READY  6
  23 wq:lp_default                  83  0.743  1252/ 1920 205 (205)  READY  4
  30 wq:hp_default                 637  5.886  1332/ 1904 237 (237)  READY  4
  47 dataman                         0  0.000   820/ 1208  90 ( 90)  w:sem  4
  57 wq:I2C1                       162  1.063  1060/ 2336 246 (246)  w:sem  4
  60 wq:I2C2                        98  0.500   732/ 2336 245 (245)  w:sem  4
  86 wq:SPI1                      1166 10.771  1352/ 2336 253 (253)  w:sem  4
  91 wq:I2C3                        48  0.437  1060/ 2336 244 (244)  w:sem  4
 101 wq:SPI3                       178  1.653  1028/ 2336 251 (251)  w:sem  4
 237 wq:nav_and_controllers        410  3.781  1324/ 2240 242 (242)  w:sem  4
 248 wq:rate_ctrl                  222  2.050  1572/ 1952 255 (255)  w:sem  4
 250 wq:INS0                       940  8.691  4372/ 6000 241 (241)  w:sem  4
 264 commander                     753  6.475  1472/ 3224 140 (140)  READY  5.03
 287 mavlink_if0                  1440 13.973  1780/ 2728 100 (100)  READY  4
 294 mavlink_rcv_if0               139  1.304  1276/ 4560 175 (175)  READY  4
 307 wq:UART5                       83  0.785   828/ 1632 229 (229)  READY  4
 370 log_writer_file                 0  0.000   372/ 1176  60 ( 60)  w:sem  3
 369 logger                         54  0.493  2468/ 3648 230 (230)  READY  3
 393 top                          1053 10.015  3060/ 4080 237 (237)  RUN    3
 396 mavlink_rcv_if1               166  1.608  1380/ 4560 175 (175)  READY  4
 395 mavlink_if1                  2167 23.459  1812/ 2824 100 (100)  READY  4

Processes: 26 total, 12 running, 14 sleeping
CPU usage: 93.90% tasks, 2.91% sched, 3.19% idle     77.08% tasks, 2.87% sched, 20.05% idle -16.82%
DMA Memory: 5120 total, 1024 used 1024 peak
Uptime: 18.242s total, 2.419s idle
 2021-11-05 13:50:02 -04:00
David Sidrane 4225193456 nxp_fmurt1062-v1:Proper USB HS config 2021-11-05 13:50:02 -04:00
David Sidrane e2b4e435a9 Build system:Board level control of no-unaligned-access 2021-11-05 13:50:02 -04:00
David Sidrane af9f8f08c6 NuttX PX4 build - capture log in VERBOSE=True|1 2021-11-05 13:50:02 -04:00
David Sidrane d4c2476699 nxp_fmurt1062-v1:init Fix Spelling 2021-11-05 13:50:02 -04:00
David Sidrane 46b208ba21 nxp_fmurt1062-v1:init Define ret indepenent of enabled IP Blocks 2021-11-05 13:50:02 -04:00
David Sidrane 29eb27632a nxpfmurt1062-v1:Add USB dev 2021-11-05 13:50:02 -04:00
RomanBapst 56cf77a74c addressed review comments 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-11-05 18:04:33 +01:00
RomanBapst e36e527488 fixed wrong path 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-11-05 18:04:33 +01:00
Roman Bapst d58d13b2e8 APX4-1617: Fix manual climb rate in TECS (#1463) 
* tecs: workaround for the fact that vel smoothing lib uses a DOWN coordinate system

Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-11-05 18:04:33 +01:00
RomanBapst 7cb99f521c moved ManualVelocitySmoothing to motion_planning lib 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-11-05 18:04:33 +01:00
RomanBapst 924298e9c3 addressed review comments 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-11-05 18:04:33 +01:00
RomanBapst 0ac3077bdc tecs: use trajectory generation library to compute height rate setpoint 
- added ability to specify maximum acceleration constraint for height rate setpoint
- added support for locking altitude setpoint when in height rate control
mode and height rate input is zero

Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-11-05 18:04:33 +01:00
RomanBapst 6e75b7cffd FixedWingPositionControl: push altitude setpoint locking into TECS 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-11-05 18:04:33 +01:00
Beat Küng 296db60a58 camera_capture: use output functions for pin configuration if SYS_CTRL_ALLOC==1 2021-11-05 12:36:04 -04:00
Beat Küng 6d993a9301 camera_trigger: use output functions for pin configuration if SYS_CTRL_ALLOC==1 2021-11-05 12:36:04 -04:00
Silvan Fuhrer f492fa9d3a fix typo 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
RomanBapst 514cf12c57 addressed review comments 
Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2021-11-05 17:58:21 +03:00
Silvan Fuhrer 3bd114bf9f RTL: if vehicle is a VTOL in hover, always consider all safe landing points 
Unless there is already a mission landing in progress,
in that case stay on the mission landing if RTL_TYPE
isn't set to closest.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
Silvan Fuhrer 1163a52c17 Navigator: remove unnecessary (duplicated) info messages for RTL 
There is already (a more precise) info message on RTL activation.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
Silvan Fuhrer f4f9b8ebf2 RTL: replace deny_mission_landing logic by getDestinationTypeMissionLanding() 
The rtl instance decides on destination of RTL, and Navigator then switches to
mission mode if required.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
Silvan Fuhrer ab08bbdb58 RTL: improve RTL info message 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
Silvan Fuhrer 775a1eb4b6 RTL: remove unused function and non-informative comments 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
Silvan Fuhrer dd987c08a5 RTL: rename enum names for RTLType 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
Silvan Fuhrer a012f01dbc Navigator: clean up get_rtl_type() 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
Silvan Fuhrer 8dc6d5f208 RTL: set destination type to mission landing also in MC 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 17:58:21 +03:00
Daniel Agar 9c15be22d6 mc_autotune_attitude_control: add new MC_AT_EN parameter to enable 
- only enabled by default on boards that aren't memory constrained
 2021-11-05 09:52:07 -04:00
bresch 1e94512719 FD: use flags union instead of bitmask 2021-11-05 09:45:52 -04:00
bresch 3f1025fb1e FD: add dedicated topic to log more internal states 
log imbalanced propeller check metric

add failure_detector_status message
 2021-11-05 09:45:52 -04:00
bresch b8ed457371 Commander: trigger failsafe action if imbalanced propeller detected 2021-11-05 09:45:52 -04:00
bresch 5dfb8e594a FD: add imbalanced propeller check 2021-11-05 09:45:52 -04:00
bresch bf2fb70d67 vehicleIMU: compute and log accel variance 2021-11-05 09:45:52 -04:00
Silvan Fuhrer f02786d112 Navigator/Commander: make GPS failsafe consitent: switch to Descend also for FW and VTOL 
- remove GPS failsafe mode
- for VTOL: transition to hover in Descend (unless NAV_FORCE_VT is not set)

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 12:09:39 +03:00
Silvan Fuhrer b77487d69c Fixed-wing Position controller: add modes for auto altitude and auto descend 
- bit of clean up
- add GPS failsafe mode auto_altitude, that will keep current altitude with a fixed-bank angle
for some time, then switches to auto_descend that will descend with constant sink rate
of 0.5m/s
- params controlling GPS failsafe are not FW params: NAV_GPSF_R --> FW_GPSF_R and
NAV_GPSF_LT --> FW_GPSF_LT

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2021-11-05 12:09:39 +03:00
Daniel Agar c73a1b4c68 update UAVCAN-v0 dsdl to DroneCAN 2021-11-04 21:36:13 -04:00
Daniel Agar 67437396f1 mpu6000: add USER_CTRL I2C_MST_EN bit to checked registers 2021-11-04 21:22:14 -04:00
Daniel Agar 8fbb241c2e mpu6000: add gyro/accel self test bits to checked registers 2021-11-04 21:22:14 -04:00
Daniel Agar bffcdd6fad boards: modalai_fc-v2 fix bootloader board type 2021-11-04 15:43:29 -04:00
Matthias Grob f55590ce78 FlightTaskOrbit: remove duplicate newlines 2021-11-03 17:37:52 +01:00
Matthias Grob 6cea707330 FlightTaskOrbit: increase acceptance radius from 1 to 2m 
to avoid reaproaching when tracking is not perfect while
acc/deccelerating by stick.
 2021-11-03 17:37:52 +01:00
Matthias Grob eda9dce033 FlightTaskOrbit: fix direction change via MAVLink command 2021-11-03 17:37:52 +01:00
Thomas Debrunner d450afead6 FlightTaskOrbit: Direct orbit approach with slowdown at intersection point 2021-11-03 17:37:52 +01:00