Commit Graph

208 Commits

Author SHA1 Message Date
alexklimaj 51e1a80556 driver: cleanup imu folder 2023-11-03 10:50:27 -04:00
Silvan Fuhrer 563fd8427a boards: increase init stack size by 100B
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-10-02 09:37:06 +02:00
Beat Küng c95539e8ce boards: increase init stack size by 150B
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
Thomas Stastny 82fd2987c9
fw pos control: revert name until we delineate this module a bit more (#21442) 2023-04-13 17:00:04 +02:00
PX4 BuildBot efab9be488 update all px4board kconfig 2023-03-24 10:01:58 -04:00
Konrad 3e200bca0d fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming. 2023-02-09 17:51:55 +01:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
PX4 BuildBot e6c4416250 update all px4board kconfig 2023-01-07 21:53:01 -05:00
Daniel Agar dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
JaeyoungLim 21e88f64b4
Add new fixed wing rate control module (fw_rate_control)
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2023-01-04 11:14:00 -05:00
Daniel Agar 40e3503c39 boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration) 2022-12-29 12:50:37 -05:00
Daniel Agar c2f15f5957 boards: update all px4boards (make all_px4_savedefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar f2cd7667dc systemcmds/bsondump: new command line utility (extracted from parameters) 2022-12-21 10:14:00 -05:00
Peter van der Perk b8e07cc52c Fix Ethernet Socket Defaults 2022-12-19 13:24:55 -05:00
David Sidrane 9faa8e23e8 NuttX Upgrade CONFIG_LIB_BOARDCTL->CONFIG_BOARDCTL 2022-11-22 14:30:08 -05:00
Daniel Agar 2cb4ef0629
NuttX 10.3+ upgrade (#20190)
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
2022-11-20 20:28:07 -05:00
Daniel Agar 8f25acd428 sih remove gps and use standalone sensor_gps_sim 2022-09-09 18:00:50 -04:00
Daniel Agar bfe0d71a21 sih remove baro and use standalone sensor_baro_sim 2022-09-09 18:00:50 -04:00
Daniel Agar c5336abba2 sih remove mag and use standalone sensor_mag_sim 2022-09-09 18:00:50 -04:00
Daniel Agar bcdd2203d3 delete systemcmds/motor_test and msg/test_motor.msg 2022-09-09 09:14:09 -04:00
Daniel Agar d3312f955f delete systemcmds/pwm 2022-09-09 09:14:09 -04:00
Daniel Agar 5dd1e5a018 delete systemcmds/mixer 2022-09-09 09:14:09 -04:00
Daniel Agar 4040e4cdf2 simulation organization and cleanup
- new modules/simulation directory to collect all simulators and related modules
 - new Tools/simulation directory to collect and organize scattered simulation submodules, scripts, etc
 - simulation module renamed to simulator_mavlink
 - sih renamed to simulator_sih (not a great name, but I wanted to be clear it was a simulator)
 - ignition_simulator renamed to simulator_ignition_bridge
 - large sitl_target.cmake split by simulation option and in some cases pushed to appropriate modules
 - sitl targets broken down to what's actually available (eg jmavsim only has 1 model and 1 world)
 - new Gazebo consistently referred to as Ignition for now (probably the least confusing thing until we fully drop Gazebo classic support someday)
2022-08-25 09:10:03 -04:00
Igor Mišić f929017618 boards: link missing arch_io_pins lib 2022-07-31 11:19:20 -04:00
Daniel Agar 5b6e5a0968 boards: NuttX update all boards to preallocated sem holder list
- CONFIG_SEM_PREALLOCHOLDERS=32
 - CONFIG_SEM_NNESTPRIO=16 (default)
2022-05-31 01:41:07 -07:00
Daniel Agar f390f52058 drivers/differential_pressure: remove lib/drivers/airspeed dependency and cleanup
- split ms4525_airspeed into separate ms4515 and ms4525 drivers
2022-04-26 08:39:19 -04:00
Julian Oes 490a0c473b Rename vmount to gimbal 2022-02-07 19:21:15 -05:00
Daniel Agar d077ca15fb delete PWM_SERVO_SET, PWM_SERVO_SET_MODE, systemcmds/motor_ramp, and pwm_out test 2022-01-10 09:51:11 -05:00
Daniel Agar df44df2df6 delete systemcmds/esc_calib
- this is redundant with commander esc_calibration
2022-01-10 09:51:11 -05:00
Daniel Agar daa925137c boards: move default battery calibration defines to parameter defaults 2022-01-10 09:49:36 -05:00
Daniel Agar e835a7c4ea boards: enable readline history and tab completion on newer boards 2022-01-03 10:44:32 -05:00
Daniel Agar 8185e2a384 boards: board_app_initialize() don't return early on failure
- depending on the situation we're more likely to get actionable user
feedback by allowing boot to complete rather than silently failing
2021-12-09 20:41:54 -05:00
Daniel Agar a2064cceff boards: enable early MPU reset on any board potentially not using the PX4 bootloader 2021-12-01 20:13:41 -05:00
David Sidrane 5b30d1cd41 av_x-v1:Set CONFIG_MKFATFS_BUFFER_ALIGMENT=32 2021-11-24 09:46:23 -05:00
Beat Küng 4c03def6e9 boards: add CONTROL_ALLOCATOR + ACTUATOR_TEST 2021-11-23 12:40:22 -05:00
Daniel Agar f5d9b01f5c
NuttX build in place
- cmake NuttX build wrapper compile in place instead of copying source tree to build directory
    - slightly faster skipping necessary copying (depending on system)
    - allows debugging in place
    - easier to work directly in NuttX following official documentation
    - simplifies overall build which should make it easier to resolve any remaining NuttX dependency issues in the build system
 - the downside is switching back and forth between different builds always require rebuilding NuttX, but I think this is worth the improved developer experience
 - also no longer builds px4io and bootloader in every single build, for most users these rarely change and we're wasting a lot of build time
2021-11-15 18:47:38 -05:00
Daniel Agar 2d816e0b3e [WIP] manual_control selector hacks 2021-11-09 16:05:25 +01:00
Peter van der Perk c6f249f7f1 Kconfig merge_config only set to 'n' when BOOL
Run make updateconfig to fix delta's of derived configs
2021-11-02 09:34:21 -04:00
bresch 6ec9ab11f2 add fw auto-tune module to board configs 2021-10-25 13:41:31 +02:00
Peter van der Perk ed5fee1a72 Backport #18311 mc atune 2021-10-07 10:09:01 -04:00
Peter van der Perk 454c907b7d Kconfig backport #18327 mag_bias 2021-10-07 10:09:01 -04:00
Peter van der Perk 36191e649a Kconfig backport #18289 and other flash size fixes 2021-10-07 10:09:01 -04:00
Peter van der Perk 33fd65e5fe [Kconfig] Fix regressions found by bloaty and cleanup unused cmake 2021-10-07 10:09:01 -04:00
Peter van der Perk b3e799e277 [Kconfig] Add all distance sensors 2021-10-07 10:09:01 -04:00
Peter van der Perk 21e6547ac7 [Kconfig] Toolchain & platform fixes, SITL still broken 2021-10-07 10:09:01 -04:00
Peter van der Perk 6af0477733 [Kconfig] Gnerate px4board from old cmake
Added make updateconfig to update all config when default's have changed
Added cmake to px4board conversion script
2021-10-07 10:09:01 -04:00
Daniel Agar bbfaa4694c
boards: cleanup serial RX DMA hrt_call_every
- remove ts_to_abstime dependency
2021-10-06 14:39:59 -04:00
Daniel Agar c271a9e3e6 add sd_stress to all boards and run on test rack 2021-10-04 17:38:31 -04:00
bresch 1443f773da mbe: add module to targets 2021-10-02 21:25:21 -04:00
bresch 5874b1f87c mc atune: add module to all targets
- adjust flash constrianed targets to fit
2021-10-02 18:12:05 -04:00