dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
30,481 Commits 514 Branches 136 Tags 601 MiB
Commit Graph

282 Commits

Author SHA1 Message Date
Daniel Agar 627e531fcc boards: fmu-v2/v3 limit rate loop by default 2020-01-21 19:20:49 +01:00
David Sidrane 1b313c675c fmuk66-v3:Fix hang on SDIO card removal/reinsertion 
The interrupt driven card detect logic was enabled
   but the auto mounter was not. That interrupt was
   calling mmcsd_mediachange.

   There is a reentrancy issues in the kinetis callback logic.
   Toplevel calls mmcsd_mediachange calls SDIO_CALLBACKENABLE
   that calls kinetis_callbackenable that calls kinetis_callback
   that calls mmcsd_mediachange.
 2019-11-15 14:11:30 -05:00
Travis Bottalico 571c6f136d modalai fc-v1: add dshot support 2019-10-28 16:04:11 -04:00
Daniel Agar 6a0f5249f8
sensors: split out analog battery handling to new standalone battery_status module 2019-10-21 13:40:23 -04:00
Beat Küng 0871802568 mixer_module: add support for test_motor (motor_test CLI command) 2019-10-21 09:42:08 +02:00
modaltb 3bbf1cc868 Add support for ModalAI FC1 2019-10-19 12:23:23 -04:00
modaltb 1e1549a169 Add support for Bosch BMP388 barometer 2019-10-15 23:33:49 -04:00
Matthias Grob e843090383 Replace a lot of memset with {} initializers 2019-10-15 10:01:03 -04:00
Silvan Fuhrer 51374aec7b px4_fmu-v5: add here2 mag to startup 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2019-10-14 15:16:33 -04:00
Beat Küng 803a71928f fmu-v3: enable DShot 
Disables RX DMA on TEL4 and IO debug serial port
 2019-10-11 08:14:17 +02:00
Beat Küng 67500123e3 fmu-v5: add dshot support 
But only on the first 4 FMU outputs, as the next ones conflict with px4io
serial dma (UART8_RX)

RX DMA is disabled on the GPS port as well (conflicts with TIM1).
 2019-10-11 08:14:17 +02:00
Beat Küng b080679146 kakutef7, kopis airframe: enable dshot & telemetry 2019-10-11 08:14:17 +02:00
Beat Küng 182efaa757 dshot: reduce static buffer size 
And handle failures of up_dshot_init().

On Omnibus: reduces memory usage if dshot is enabled by ~1.0KB.
The buffer is roughly 1KB in size.
 2019-10-11 08:14:17 +02:00
Beat Küng 775916ef11 kakutef7: enable dshot 2019-10-11 08:14:17 +02:00
Igor Mišić 543a057f80 fmu-v4: add dshot timer config 2019-10-11 08:14:17 +02:00
Beat Küng ac82c5114b omnibusf4sd: add dshot timer config 2019-10-11 08:14:17 +02:00
Daniel Agar f885d2274a
Revert "vtol_att_control: update parameter strings to class enum" 
This reverts commit 5351f886ec.
 2019-10-03 11:28:51 -04:00
Daniel Agar c639444ef9 intel aerofc-v1 disable sih module to save flash 2019-10-02 19:44:46 -04:00
Daniel Agar 315141873e NuttX boards reduce CONFIG_MAX_TASKS 64 -> 32 (default) 2019-10-02 19:44:46 -04:00
Daniel Agar 5351f886ec vtol_att_control: update parameter strings to class enum 2019-10-02 19:43:32 -04:00
Daniel Agar 26364d44c9
px4_work_queue: command line status output and shutdown empty queues 
* adds a work_queue systemcmd that will bring a tree view of all active work queues and work items
 * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached
 2019-10-02 12:23:17 -04:00
Daniel Agar 3687677095 cmake: show sitl_gazebo build output and improve rebuild 2019-10-01 14:22:30 -04:00
Daniel Agar a557f3ffe4 bitcraze crazyflie add dmesg and console buffer 2019-09-30 14:29:54 -04:00
garfieldG bbb96cbd0c Mavlink startup script per board 
-moved rc.mavlink to the boards optional rc additions (now it's called rc.board_mavlink) to handle board specific mavlink needs (mavlink over usb, ethernet, additional streams, etc.)
-mavlink module will be responsible to usb defaults, therefore less args are needed to be passed to mavlink module if one wants to use mavlink over usb.
-the way to check if connection is usb is by it's designated variable and not by config mode.
 2019-09-29 10:46:08 -04:00
Daniel Agar 0486d69240 delete obsolete segway example 2019-09-28 15:05:50 -04:00
mcsauder 7b16c3482d Refactor the ll40ls namespace driver methods to more closely match the cm8jl65, mappydot, leddar_one, and other distance sensor driver implementations. 2019-09-27 07:55:53 +01:00
Daniel Agar 2366abefd8
nxp/fmuk66-v3: readd uavcan 
* this was accidentally dropped earlier this year
 2019-09-25 13:42:59 -04:00
mcsauder 410dd85289 Comment out the ll40ls (LidarLite) driver from the fmu-v2 build. 2019-09-13 11:03:13 -04:00
BazookaJoe1900 6ab5c2170e remove unused pca8574 and oreoled drivers 2019-09-04 08:05:08 -07:00
Daniel Agar f1339038ca
px4_fmu-v5_stackcheck disable roboclaw and pca9685 to reduce flash 2019-09-03 08:03:32 -07:00
Silvan Fuhrer d5fdc55460 fmu-v5: add baro again in startup 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2019-09-03 13:48:34 +02:00
Daniel Agar 3c8a41aff7 px4_fmu-v2 variants disable mpu9250 2019-09-02 12:42:18 -04:00
BazookaJoe1900 8a45c6145b add new parameter SENS_EN_PMW3901 to start pmw3901 optical flow 2019-09-02 11:08:51 -04:00
Daniel Agar 82bcfcb710 boards/px4/fmu-v5x remove alternate configs until default is complete 2019-09-01 18:48:55 -04:00
BazookaJoe1900 e3b60cd9e7 rc.sensors: moved common ms5611 start to rc.board_sensors per board 2019-09-01 12:55:50 -04:00
Daniel Agar 78ef8aab2d STACK_MAIN increase default 1024 -> 2048 2019-08-30 19:11:51 -07:00
Beat Küng f3fccf53f6 src/drivers/{kinetis,stm32}: move to arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng 1cb6c36a00 adc: refactor into arch-specific directories 2019-08-30 07:59:44 +02:00
Beat Küng ab43a83bed platform: restructure (NuttX) architecture-specific code 
updated: tone_alarm, px4io_serial, px4_micro_hal
 2019-08-30 07:59:44 +02:00
roangel e50dd7c364 replay: close replay log file after replay is finished, then exit (#11264) 2019-08-28 08:13:50 +02:00
Daniel Agar b1d59c8817
px4fmu split safety button into new driver 2019-08-24 17:14:17 -04:00
Hyon Lim 0262a699c1 UVify Core board support and airframes (Draco, Draco-R, IFO) (#12337) 
* also includes minor changes to make it easy to keep in sync with px4_fmu-v4
 2019-08-23 17:02:25 -04:00
Daniel Agar 3c0f4f9ace
Jenkins hardware snapdragon build with CCACHE_BASEDIR and dump logs 2019-08-22 16:20:39 -04:00
Daniel Agar e7e477962c
snapdragon fix sanity test and add to Jenkins hardware 2019-08-22 15:11:32 -04:00
Daniel Agar 7d248e0f45
px4fmu: move to WQ with uORB callback scheduling (#12224) 2019-08-20 20:24:12 -04:00
Daniel Agar 5ae408382b
led drivers and controller move to uORB::Subscription 2019-08-20 14:03:23 -04:00
Daniel Agar 6cf55ac83a av_x-v1 fix timer_config clock bit 2019-08-19 15:22:08 -04:00
Daniel Agar 7adc43b795
px4_fmu-v5: add critical section monitor build (#12724) 2019-08-16 21:48:09 -04:00
Daniel Agar 6e7e2b6e3b
px4_fmu-v5: add irqmonitor build (#12723) 2019-08-16 19:01:16 -04:00
Daniel Agar b7f0db62ba
mRo Control Zero F7 initial board support 2019-08-14 13:13:27 -04:00