This allows to inject an updated ext_autostart folder with the name
ext_autostart_new, and then PX4 takes care of renaming it to
ext_autostart during bootup.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
The sparse vector template requires to know which states are non-zero in
the observation jacobian. This complicates the modularity of the code
when the state vector or the derivation is changed.
The computation cost difference is almost negligible for this size.
For FW takeoffs we need to keep the course straight towards the first
waypoint, and not climb in loiter patterns first.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Current threshhold has no margins of errors with the set acceptance radius. Increase corridor radius by 5m.
Increase time to disarm for tailsitter test to pass.
Rverse mission needs check tracks test disabled since mavsdk does not really work with mission has reverse order.
mavsdk-test: added a vtol mission without a landing at the end (used for reversed RTL)
math_helpers: added function to compute local position from a raw mission item
Signed-off-by: RomanBapst <bapstroman@gmail.com>
Dataman: Add write function to dataman cache.
RTL and mission have a new common base class mission_base. Both inherit from them and mission, RTL mission, and rtl reverse mission inherit from them and implement their desired functionalities. This simplifies the logic in mission as well as make the logic in rtl mission reverse and mission more readable.
Rtl mission reverse now functional again for VTOL flying back the mission and transitioning to MC at the home position.
Dataman cache has new write functionality to write to dataman while updating write item in its cache if necessary.
Dataman cache is now only updated when the respective module is active. Leads to a higher computation time once on activation, but decreases unnecessary cache updates when inactive.
This is required to support fixed pitch propeller helicopters that have
no collective but only cyclic pitch with two degrees of freedom and
hence only two servos.
The amount of thrust in the body z axis is then controlled using the
motor speed which makes particularly sense on coaxial helicopters
that need to control yaw with changing motor speeds already.
- Preserve tilt variance while doing a yaw reset
- Yaw variance is now correctly set instead of increased
---------
Co-authored-by: Dominique <dominique.leblanc@donecle.com>
Co-authored-by: bresch <[brescianimathieu@gmail.com](mailto:brescianimathieu@gmail.com)>
Events have a global, system-wide sequence number, which must be handled
atomically, (fetching and incrementing the sequence AND sending the event
to uORB must be atomic). Currently in FLAT mode, only one instance of this
sequence number exists, so it is OK to have it in px4_platform.
However, in PROTECTED mode px4_platform is instantiated both in kernel-
and user spaces, which makes two instances of this sequence number, which
causes problems in the mavlink event handling logic.
When mavlink receives and handles events, it expects that:
- The sequence numbers arrive in order (seq n is followed by n+1 etc)
- It increments by 1
- There is only one instance of the sequence number
In PROTECTED mode this is violated, as the kernel and user sequence
numbers run freely on their own. This patch fixes the issue by moving
the event backend to the kernel and by providing user access to it via
ioctl.
Even if there is some horizontal motion, a passing check should be
accepted as the terrain can be flat. However, the vehicle must not be
moving horizontally to invalidate the consistency as a change in terrain
can make the kinematic check temporarily fail.
mcsauder
Silvan Fuhrer
Daniel Agar
bresch
Konrad
RomanBapst
Matthias Grob
henrykotze
Niklas Hauser
alexklimaj
Mathieu Bresciani
Ville Juven
Vincent Poon
David Sidrane