Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
40,437 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

217 Commits

Author SHA1 Message Date
Matt Lawrence 2a1735192a Tools: Updating solo's parameters 2020-01-19 10:42:14 +09:00
Matt Lawrence 886153abf5 Frame_Params: Fix Solo params for copter 4 2019-12-18 14:08:32 +11:00
Matt Lawrence 9582ef3d26 Frame_params: Solo notch filter params 
Adds the dynamic harmonic notch filter and static notch filter to the Solo's default parameters.  PID tuning parameters for the green cube Solo adjusted to take advantage of the better control.
 2019-12-16 13:40:48 +09:00
Andrew Tridgell 6c6a7cc675 Tools: removed old SkyViper-F412 defaults file 2019-09-12 14:02:36 +10:00
Randy Mackay 1edd1034f9 Tools: update for amovlab-p200 default params 2019-09-06 14:39:34 +09:00
Randy Mackay a648e7e695 Tools: add default params for amovlab p200 reference frame 
also minor update to hexsoon edu450 params
 2019-09-06 12:02:24 +09:00
Randy Mackay b40c20aea2 Tools: update hexsoon edu450 params 2019-09-03 15:27:52 +09:00
Randy Mackay 49b0d46612 Tools: param file for Hexsoon EDU450 2019-08-29 16:27:30 +09:00
Leonard Hall fb790cadda Tools: update parameter files after PID upgrade 2019-07-25 17:38:15 +09:00
Andrew Tridgell ea212af2e5 Tools: added an example gpio.sh for the disco 
trigger camera actions
 2019-07-06 09:02:54 +10:00
Matt ad2d7dac3e Re-enable watchdog on Solo build targets 2019-06-23 09:00:32 +10:00
Matt Lawrence e5bc18dbe8 Frame Params: Disable watchdog for Solo 
Set BRD_OPTIONS to zero to disable watchdog on Solo with Copter 3.7-dev.
 2019-05-09 07:51:05 +09:00
Matt Lawrence 4d1c1bd380 Frame Params: Update solo arming check params 
No longer need to ignore logging prearm failure
 2019-05-08 11:53:47 +10:00
Peter Barker 9474fa1120 Tools: remove byte order mark from Solo params file 2019-04-19 20:46:03 +09:00
Michael du Breuil ec1b6db83b Tools: Remove BRD_SERIAL_NUM from parameter files 2019-04-08 18:18:32 -07:00
Randy Mackay 2f82af9fdf Tools: SkyViper-F412 defaults to use pixart flow sensor 2019-04-08 11:26:59 +09:00
Randy Mackay 26ec280507 Tools: add HK-HydroPro-Inception parameter file 2019-03-26 16:47:16 +09:00
Matt Lawrence 557a20eaa7 Frame Params: Update solo's default parameters 
Update solo's param files.
- Make battery parameters consistent across versions
- Remove unnecessary compass params
- Speed up param stream rate to 30
 2019-01-28 08:46:00 +09:00
Tom Pittenger 99120cddf9 Frame_params: add SkykWalker X8 param files 2019-01-15 09:47:59 -07:00
lordneeko fb212907a1 Tools: Update SV2450 default.parm file for AC-3.6 
Update default parameters for Skyviper 2450 GPS battery failsafes, changed in AC-3.6
 2019-01-05 09:47:51 +09:00
Matt 441222e80b Frame_params: Update to Solo parameters 
New changes related to motor PWM, motor output, slew time, and RC6 trim
 2018-12-10 08:51:13 +09:00
Matt 5d000613a5 Frame_params: Update Solo's required parameters 
Adds Solo parameter files for  Copter 3.7 on both Cube Black and Cube
Green.  Updates the file names for the existing Solo Copter 3.6 and
Copter 3.5 parameter files.  The 3.7 files are now referenced by the
Solo's ChibiOS hwdef files.
 2018-12-04 12:54:55 +09:00
ChristopherOlson 2d89bcaef6 Tools:TradHeli - update param files to lower gains for ACCZ_P, and Position Controller velocity request 2018-08-17 15:05:04 +09:00
Randy Mackay 31bfedafa2 Tools: add arduroller balance bot parameter defaults 2018-08-11 12:56:51 +09:00
ChristopherOlson cbe68b4a91 Tools:TradHeli - update Copter3.6 setup params and add param files for QGC 
add new Copter3.5 to 3.6 upgrade params to set the PSC, LOIT
and NAV controllers for New Loiter and new Position Controller
 2018-08-09 08:42:19 +10:00
Matt d0a613225f Frame_Params: Update for Solo on AC36-RC7 2018-08-06 09:34:02 +09:00
Lucas De Marchi 604deaf4ba Frame_params: remove safety mask from intel-aero-rtf 
Now we can build without it, so there's no need to set this param.
 2018-08-02 13:15:02 -07:00
Peter Barker 0f50cf96ca Tools: Frame_Params: correct for CH7 -> RC7 change 2018-08-02 08:26:03 +10:00
Randy Mackay cc0b3705e9 Tools: default param file for Thunder Tiger Toyota Hilux 2018-07-06 14:47:15 +09:00
Lucas De Marchi 981a575aa2 Frame_params: rename some aerofc parameters 
Now that we don't panic() on unknown parameters, we can boot even with
wrong parameters. This brings the default parameters of aerofc to be up
to date.

The following parameters were not removed and will be warned:

WPNAV_LOIT_JERK
WPNAV_LOIT_MAXA
WPNAV_LOIT_MINA
WPNAV_LOIT_SPEED

There are no clear substitute for those, so they are staying until we
know if they should be renamed/changed/removed.
 2018-06-28 10:18:19 -07:00
Randy Mackay 8c485e1a9e Tools: set ground effect comp in tradheli default parameters 2018-06-08 09:51:50 +09:00
Randy Mackay 3ecc0ea6c8 Tools: add hydrotek boat default parameters 2018-05-29 16:07:55 +09:00
Randy Mackay f2ac48a33e Tools: update holybro kospi1 default 2018-05-28 10:42:21 +09:00
Randy Mackay 268fac0fba Tools: default params for Holybro Kospi1 2018-05-28 10:11:45 +09:00
ChristopherOlson 087fd4effc Tools: Add default tuning params for single-rotor TradHeli 
Tunes PSC, LOIT, NAV, ATC specific to Copter 3.6 and New Loiter
 2018-05-11 12:28:14 +09:00
Randy Mackay 94a1a025f1 Tools: update AION R1 default params 2018-04-26 14:07:08 +09:00
Randy Mackay 7f7a588002 Tools: add accel and turn-rate max and increase steering angle P 
these parameters were added to Rover-3.3
 2018-04-23 11:06:34 +09:00
Randy Mackay 1b26f8527a Tools: remove RC params from eLAB445 param file 2018-04-17 08:35:36 +09:00
Randy Mackay 741d641876 Tools: remove unused real-flight default param files 2018-04-17 08:32:25 +09:00
Randy Mackay 781a0b457b Tools: update WLToys v383 roll and pitch rate gains 2018-04-13 18:38:38 +09:00
Randy Mackay 2f26b3faa1 Copter: update HeliQuad param file 
fix servo range and reverse params
 2018-04-09 16:42:38 +09:00
Randy Mackay 80e5742d77 Tools: correct HeliQuad param file 2018-04-09 08:42:00 +09:00
Jacob Walser 9897ff60de Frame_params: Add BlueROV2 Heavy param file 2018-02-28 13:22:08 -05:00
nicknunno 72b698bf96 Tools: update AION default param 
Add servo-function reversed, compass offset maximum
 2018-02-12 16:56:46 +09:00
Andrew Tridgell 330fa815e8 Frams_params: updates for new pos controller for skyviper 2018-02-08 18:56:51 +11:00
Andrew Tridgell 238db04187 Frame_Params: set TMODE_ENABLE=2 for the F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell ca12d99430 Frame_Params: fixed orientation on F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 76703a80c4 Frame_params: disable unpopulated serial ports 2018-02-08 17:36:33 +11:00
Andrew Tridgell 3b5bb3cae2 Frame_params: default to CC2500 radio for F412 2018-02-08 17:36:33 +11:00
Andrew Tridgell 5eb29f94ce Frame_Params: update config for Skyviper-2450 2018-02-08 17:36:33 +11:00