Commit Graph

102 Commits

Author SHA1 Message Date
Paul Riseborough 53c4b163ce AP_NavEKF3: Allow adjustment of on ground not moving test sensitivity
Also re-tune default sensitivity based on user supplied logs with noisy gyro data.
2021-03-23 10:05:59 +11:00
Paul Riseborough 6a603019d5 AP_NavEKF3: Add accessor function for yaw alignment status 2021-03-05 12:10:01 +11:00
Paul Riseborough 9a5a264aa0 AP_NavEKF3: Improve wind estimation without airspeed sensing
Enable default airspeed variance to be specified externally
Improve control of sideslip fusion
Don't modify non wind states unnecessarily when using synthesised air data measurements
2021-03-05 12:10:01 +11:00
Randy Mackay f6cb0819ef AP_NavEKF3: pre_arm_check may skip position checks 2021-01-26 10:46:49 +11:00
Peter Barker 3582b69e9c AP_NavEKF3: remove getFilterTimeouts access methods 2021-01-22 13:04:36 +11:00
Peter Barker b3bacdd33c AP_NavEKF3: remove internal-only getTiltError method 2021-01-21 21:26:17 +11:00
Peter Barker 5ad0ac6727 AP_NavEKF3: remove unused getAccelNED method 2021-01-21 21:26:17 +11:00
Andrew Tridgell be4d10a95e AP_NavEKF3: rework parameter handling
and fixed indentation
2020-12-11 15:21:41 +11:00
Paul Riseborough c9ab4b18b0 AP_NavEKF3: Add multicopter wind estimation 2020-12-11 15:21:41 +11:00
Andrew Tridgell 80f7906744 AP_NavEKF3: removed inhibitGps and inhibitGpsVertVel options
these were unused
2020-12-01 10:33:50 +11:00
Randy Mackay adfc92523b AP_NavEKF3: add configuredToUseGPSForPosXY 2020-11-25 21:00:07 +11:00
Peter Barker e1a033b296 AP_NavEKF3: make logging a core concern
Also dissolve some methods only used for logging
2020-11-22 20:47:29 +11:00
Randy Mackay 8895d20c45 AP_NavEKF3: rename setPosVelYawSourceSet 2020-11-20 16:43:44 +09:00
Randy Mackay 0f8d0ef11b AP_NavEKF3: move sources to 2nd bank of parameters 2020-11-20 16:43:44 +09:00
Randy Mackay 33b6212cce AP_NavEKF3: rename _sources to sources 2020-11-20 16:43:44 +09:00
Randy Mackay 6c0bb6a198 AP_NavEKF3: add convert_params for source 2020-11-20 16:43:44 +09:00
Randy Mackay ba9f60abc7 AP_NavEKF3: add getVelInnovationsAndVariancesForSource 2020-11-20 16:43:44 +09:00
Randy Mackay 8931e50166 AP_NavEKF3: integrate Source for alt 2020-11-20 16:43:44 +09:00
Randy Mackay c21d58ebea AP_NavEKF3: integrate Source for position 2020-11-20 16:43:44 +09:00
Paul Riseborough aaf558f593 AP_NavEKF3: Add velocity innovation check to use of EKF-GSF yaw
Only apply to non fly forward vehicle, eg copters, because magnitude of velocity innovation produced by plane launches is TBD.
2020-11-16 16:01:13 +11:00
Andrew Tridgell 1bdf6173ec AP_NavEKF3: removed have_ekf_logging 2020-11-10 16:15:45 +11:00
Andrew Tridgell f3c3778169 prevent duplicate EKF logging
vehicle code sometimes tries to log the same data twice
2020-11-10 16:15:45 +11:00
Andrew Tridgell 096aab9388 AP_NavEKF3: convert to use AP_DAL for new replay structure
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
2020-11-10 16:15:45 +11:00
Peter Barker fc49b55b85 AP_NavEKF3: make coreBetterScore const 2020-11-03 10:39:35 +11:00
Randy Mackay 7b898ee001 AP_NavEKF3: minor comment and format fixes 2020-10-28 12:17:40 +09:00
Paul Riseborough 16ae75a681 AP_NavEKF3: Consolidate and log tilt error variance calculation 2020-10-26 11:03:50 +11:00
Peter Barker 83d784c22d AP_NavEKF3: fix includes 2020-10-20 11:40:54 +11:00
Randy Mackay eeb1a1846c AP_NavEKF3: replace prearm_healthy with pre_arm_check 2020-10-07 11:53:07 +11:00
Andrew Tridgell 2bc7d17e7a AP_NavEKF3: improved core comparison to check alignment
this adds coreBetterScore() which takes account of tilt and yaw
alignment when comparing cores for lane switching

this ensures we don't switch to a lane that is unaligned due to the
zero error score for unaligned lanes
2020-09-14 20:29:04 +10:00
Harshit Kumar Sankhla edc3709653 AP_NavEKF3: implement sensor affinity using EK3_AFFINITY parameter
this allows the EKF core index to be used to select a GPS/baro/mag
instance. This is an alternative to GPS blending that allows EKF lane
switching to be used to select the right combination of GPS and IMU
add logging to XKFS message
2020-08-27 20:20:51 +10:00
Harshit Kumar Sankhla d7edc946b6 AP_NavEKF3: Relative Error based Lane-Switching
Improvments to the lane selection logic, we accumulate error for each
EKF lane relative to the primary for a more robust core selection
2020-08-27 20:20:51 +10:00
chobits 4b8be2e535 AP_NavEKF3: fix comments 2020-08-04 18:16:18 +10:00
Paul Riseborough 8ff6780323 AP_NavEKF3: Clarify distinct use cases for 'takeoff expected' 2020-07-07 15:33:58 +10:00
Peter Barker 2e55584417 AP_NavEKF3: correct comments on getFilterFaults and getFilterTimeouts methods 2020-07-07 10:50:41 +10:00
Randy Mackay dccc3e22d9 AP_NavEKF3: minor comment fix re RNG_USE_HGT 2020-06-24 21:16:50 +09:00
Paul Riseborough ed5b695c94 AP_NavEKF3: Clarify intended use of setTerrainHgtStable accessor 2020-06-24 21:16:50 +09:00
Randy Mackay 0f212ca727 AP_NavEKF3: accept extnav at up to 50hz 2020-06-09 09:42:14 +10:00
Randy Mackay 93d8458d2a AP_NavEKF3: FuseVelPosNED uses ext nav vel err in obs data check 2020-06-02 08:33:42 +09:00
chobits c7817eaca1 AP_NavEKF3: support VISION_SPEED_ESTIMATE
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2020-06-02 08:33:42 +09:00
Randy Mackay ef02942459 AP_NavEKF3: writeBodyFrameOdom accepts delay 2020-05-15 10:07:52 +09:00
Randy Mackay c28fd27b02 AP_NavEKF3: writeExtNavData accepts delay 2020-05-15 10:07:52 +09:00
priseborough c5e465aec9 AP_NavEKF3: add external nav system support
includes decoupling height source from use of external nav data
2020-04-30 15:55:59 +09:00
Andrew Tridgell 7e010ef50a AP_NavEKF3: use set_enable() to set enable flag 2020-04-29 07:36:55 +10:00
Randy Mackay 86d221708c AP_NavEKF3: more white space fixes 2020-04-24 09:43:23 +10:00
Randy Mackay c1ef894a30 AP_NavEKF3: getDataEKFGSF and getYawData pass by reference 2020-04-24 09:43:23 +10:00
Paul Riseborough 410b5825fb AP_NavEKF3: Enable use of EKF-GSF yaw estimate
AP_NavEKF3: Add emergency yaw reset using a Gussian Sum Filter estimate

AP_NavEKF3: Reduce default minimum GPS velocity noise for Copters

Enables fail-safe to be set with more sensitivity and improves tracking accuracy.
Origin values were set using typical GPS performance for receivers on sale 6 years ago. Receiver performance has improved since then.

AP_NavEKF3: Prevent constant mag anomaly yaw resets

Prevents constant magnetic anomaly induced resets that can be triggered when flying with vehicle generated magnetic interference.
Allows for two resets per takeoff. Allowance for two resets is required, becasue a large ground based magnetic yaw anomaly can cause a sufficiently large yaw innovation that two resets in close succession are required.

AP_NavEKF3: Add option to fly without magnetometer

AP_NavEKF3: Rework emergency yaw reset logic

Use a separate external accessor function to request the yaw reset.
Allow reset requests to remain active for a defined period of time.
Tidy up reset function to split out accuracy check.

AP_NavEKF3: Fix vulnerability to lane switch race condition

Prevents the situation where a lane switch results in a lane being selected that does not have the correct yaw. This can occur if the primary lane becomes unhealthy before the external failsafe monitor has time to react.

AP_NavEKF3: Fix EKF_MAG_CAL = 6 behaviours

Fix bug causing the yaw alignment to be performed at startup before the GSF had a valid estimate.
Fix bug causing emergency yaw message to be output for a normal reset.
Fix vulnerability to reported negative yaw variance.
Remove duplicate timer checks.

AP_NavEKF3: Update EK3_MAG_CAL documentation

AP_NavEKF3: Relax yaw gyro bias convergence check when not using mag

AP_NavEKF3: Reduce yaw drift in hover with no yaw sensor

Uses the GSF yaw estimate if available which is better than the EKF's own yaw when no yaw sensor is available.
2020-04-24 09:43:22 +10:00
Randy Mackay 22c9081c83 AP_NavEKF3: minor comment fix 2020-04-15 19:35:30 +09:00
Andrew Tridgell 3ae0b0d446 AP_NavEKF3: added using_external_yaw() method
needed by AHRS for attitudes_consistent() check
2020-04-11 21:14:31 +10:00
Peter Barker e289020332 AP_NavEKF3: stop taking ahrs in constructor 2020-01-21 11:53:18 +11:00
Peter Barker 03cca68c5a AP_NavEKF3: use instance number when logging rather than multiple message IDs 2019-12-17 12:22:07 +11:00