Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,724 Commits 71 Branches 509 Tags 763 MiB
Commit Graph

2165 Commits

Author SHA1 Message Date
Andrew Tridgell dac569a393 RC_Channel: simplify the example 
use an array of channels
 2012-10-16 15:50:54 +11:00
Andrew Tridgell bad02cab04 RC_Channel: ensure _reverse is not 0 
this caused the example to fail
 2012-10-16 15:50:29 +11:00
Pat Hickey 8577a0c7a1 MultiFastSerial example sketch: notes on fatal error in avr-gcc 4.5.x 2012-10-15 20:42:19 -07:00
Pat Hickey 2dace5cf5f FastSerial example sketch: Depend on AP_Common for PSTR definitions 2012-10-15 20:42:18 -07:00
Pat Hickey def4ffbe86 AP_Common: PSTR def has specific version for avr-gcc 4.6 compatibility 
* Also a small change in FastSerial/vprintf.cpp, which duplicates the
  PSTR definition
* Won't effect others using earlier versions of avr-gcc
 2012-10-15 20:42:18 -07:00
Pat Hickey 5dd12bbe9d RC_Channel unit test: fixed build, functionality still wrong 2012-10-15 10:37:29 -07:00
Pat Hickey 2c9678bf01 MultiFastSerial test: make it easier to observe which serial port causes crash 2012-10-14 21:08:33 -07:00
Pat Hickey afcc3c735a FastSerial: add extra example sketch MultiFastSerial to test multiple ports 2012-10-14 18:58:12 -07:00
rmackay9 1df891e2ce AP_Motors: added reached_limit method which returns bit mask indicating which control inputs could not be achieved 2012-10-11 17:19:54 +09:00
Andrew Tridgell c56f3a9f8c AHRS: limit wind speed estimate changes 
sudden yaw changes can cause bad wind estimates
 2012-10-11 11:51:24 +11:00
Andrew Tridgell 0a80b69e62 AP_OBC: fixed resume on GPS loss 2012-10-11 11:51:24 +11:00
Pat Hickey 5743418f53 AP_ADC_test: fix build of test regressions. 
I'm not convinced I was able to make the timing test meaningful.
Someone should please lookinto this.
 2012-10-09 15:23:40 -07:00
Pat Hickey 0c44d02239 AP_DataFlash_test wibble 2012-10-09 11:39:09 -07:00
Pat Hickey 00243e3c6c DataFlash_APM2: private AP_Semaphore* rather than use extern AP_Semaphore_spi3 
The AP_Semaphore* argument to the constructor can be null (and is by
default for compatibility). Semaphore is only used when non-null.
 2012-10-09 11:38:52 -07:00
Pat Hickey 39be6be363 AP_OpticalFlow_test: fix build with NULL semaphore. 2012-10-09 11:36:21 -07:00
Pat Hickey e8cceff543 AP_OpticalFlow_ADNS3080: has private AP_Semaphore* _semaphore 
Semaphore can be null, handled correctly if it is. Rather than check for
which SPI bus the sensor is using, just check whether semaphore is not null
before using it. More general and flexible.
 2012-10-09 11:35:59 -07:00
Pat Hickey 14d52e0c03 AP_Semaphore.h: proper h macros 2012-10-09 11:12:11 -07:00
Pat Hickey 23f0758e04 AP_Semaphore_test: instantiate AP_Semaphore_spi3 locally. 2012-10-09 11:05:34 -07:00
Pat Hickey 3b3c918cf7 AP_Semaphore: do not instantiate or export a global spi3 semaphore. 2012-10-09 11:02:35 -07:00
Pat Hickey fd5106db02 AP_Semaphore_test: bugfix to extern semaphore, add Makefile for builds. 2012-10-09 10:55:50 -07:00
Pat Hickey a28099b04c AP_Semaphore: make into separate library rather than part of AP_Common 2012-10-09 10:55:06 -07:00
rmackay9 cfc55afb41 AP_MotorsMatrix: modified stability patch to sacrifice yaw first if necessary to ensure stability. 
Resolves climb-on-yaw problem.
 2012-10-09 15:48:15 +09:00
rmackay9 8ae437dc23 AP_AHRS_MPU6000: resolve compiler warning re shadowing 2012-10-06 13:22:43 +09:00
rmackay9 d754804135 DataFlash: modified to use AP_Semaphore for SPI3 bus when required. 
Also fixed test sketch which seemed broken.
 2012-10-06 12:41:50 +09:00
rmackay9 9ef95d59ba AP_OpticalFlow: modified to use AP_Semaphore for SPI3 bus when required 2012-10-06 12:41:42 +09:00
rmackay9 3220719645 AP_Semaphore: added new library to help remove conflicts over SPI bus 2012-10-06 12:41:35 +09:00
rmackay9 c2c2d560bb AP_AHRS_MPU6000: fixed yaw correction and added _secondary_ahrs parameter 
_secondary_ahrs parameter allows mpu6000 ahrs to runin parallel with DCM.
 2012-09-30 00:21:18 +09:00
rmackay9 db15b3b563 AP_PeriodicProcessStub: fixed build due to missing reference to _suspended 2012-09-29 14:41:25 +09:00
rmackay9 1cd4b08fac AP_AHRS: added scheduler parameter to init 
Required by the AP_AHRS_MPU6000 class which needs to disable timed processes that could interfere with it's communication with the mpu6000
 2012-09-29 13:51:21 +09:00
rmackay9 56320d282f AP_PeriodicProcess: added running() method which tells the caller whether the timer is suspended or not 2012-09-29 13:47:55 +09:00
rmackay9 2c29fd8ba4 AP_TimerProcess: added simple example sketch 2012-09-29 13:23:51 +09:00
rmackay9 4bca609b9f AP_InertialSensor_MPU6000: replaced _cs_pin parameter with #define and saved 1 byte of memory 
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
 2012-09-28 19:21:59 +09:00
rmackay9 2fd9022f03 ArduCopter: bug fix to DMP initialisation (it was freezing due to SPI bus conflicts) 2012-09-28 18:34:23 +09:00
rmackay9 d0177688b4 AP_OpticalFlow: save and restore SPI bus speed to remove conflict with dataflash that runs at 8Mhz 2012-09-28 17:29:45 +09:00
rmackay9 435e2c2824 AP_Motors: enable throttle curve by default 2012-09-25 23:36:35 +09:00
Andrew Tridgell e59a031611 MAVLink: comm_get_txspace should return 0 on error 
it is used in expressions that add constants
 2012-09-25 07:20:43 +10:00
Andrew Tridgell 24ab456f8e PeriodProcess: fixed build warning 2012-09-25 07:10:35 +10:00
Andrew Tridgell b39cc974dc OpticalFlow: fixed SITL build 2012-09-25 07:10:22 +10:00
Andrew Tridgell dbf501c646 GPS: fixed SIRF auto detect code 2012-09-25 07:10:07 +10:00
Andrew Tridgell bec34f3af6 SPI3: fixed the build 2012-09-25 07:03:23 +10:00
rmackay9 825246617e AP_TimerProcess: add one additional slot for optical flow 2012-09-24 18:39:28 +09:00
rmackay9 97a66a5346 AP_OpticalFlow: small fixes to test sketch to make it work with modified lib 2012-09-24 18:39:22 +09:00
rmackay9 f55d3de12a AP_OpticalFlow: remove APM2 version of library now that AP_OpticalFlow_ADNS3080 class can autodetect which SPI bus the sensor is on 2012-09-24 18:39:17 +09:00
rmackay9 99eaa37a38 AP_OpticalFlow_ADNS3080: detect if optical flow sensor is on standard or secondary SPI bus 2012-09-24 18:39:12 +09:00
rmackay9 17ccc7e62e AP_OpticalFlow: use AP_PeriodicProcess to read at 20hz 2012-09-24 18:39:07 +09:00
rmackay9 1cf0b2334a SPI3: add new library to make use of secondary SPI bus 2012-09-24 18:39:01 +09:00
rmackay9 c28d4e9ad6 AP_Motors: remove stray debug message re set-up of throttle curve 2012-09-23 12:25:31 +09:00
rmackay9 4825d16cd8 AP_Airspeed: fixed constructor compile error in example sketch 2012-09-23 11:44:28 +09:00
Andrew Tridgell f2e160a5e7 AP_Baro: removed _sync_access check 
this isn't needed as the common variables are already protected by
cli()/sei()
 2012-09-20 17:34:33 +10:00
Andrew Tridgell 1b793bf3f4 RC_Channel: don't force radio_out in enable_aux_servos() 
this is called regularly, and causes the servo to twitch
 2012-09-20 17:34:32 +10:00
Andrew Tridgell 4cfea44f9f DCM: limit the contribution of the baro to vertical acceleration 
limit to a max of 0.5g
 2012-09-20 17:34:32 +10:00
Andrew Tridgell a84d7b6f4f DCM: disable use of baro for vertical accel by default 
this has caused problems with too many users
 2012-09-20 17:34:32 +10:00
rmackay9 c6ee948d60 AP_GPS: added get_lag method to return expected lag from the GPS. 2012-09-20 15:48:22 +09:00
rmackay9 53aced1def AP_LeadFilter: moved lag to be a parameter passed into the get_position function. 
This saves 4 bytes of memory and will work better with the way we initialise the gps.
 2012-09-20 15:27:27 +09:00
rmackay9 d97ab4f490 AP_LeadFilter: bug fix so velocity * _lag is used (otherwise we are assuming a 1sec lag) 2012-09-20 13:17:42 +09:00
rmackay9 f002d6e9a6 AP_LeadFilter: added set_lag feature to allow us to adjust it for different GPSs 2012-09-20 13:10:24 +09:00
Robert Lefebvre 739d31f06e Change to the "Stability Patch" in Motors_Matrix in order to make it cover both the upper throttle range and lower, and also to cause it to raise/lower all motors when a single motor goes out of ranges. 2012-09-19 20:43:58 -04:00
Andrew Tridgell 0922b82d42 AP_Param: added find_by_index() 2012-09-20 07:42:35 +10:00
Andrew Tridgell 8a33e2ba37 GPS: disable auto detection of NMEA and SiRF on a 1280 board 
saves a bit more flash space
 2012-09-19 19:36:48 +10:00
Andrew Tridgell f3f9d644d9 AP_Airspeed: a bit more filtering 
this helps reduce noise at low speed
 2012-09-19 16:23:25 +10:00
rmackay9 aaab3c08aa ArduCopter: added throttle curve (although disabled by default) for all multicopters 2012-09-18 23:05:08 +09:00
Andrew Tridgell 3306ba95a7 MPU6k: save 72 bytes of memory 
the buffer can be on the stack
 2012-09-18 13:58:50 +10:00
Andrew Tridgell 2bc1d4a5ae SITL: prevent a fd leak in GPS code 2012-09-17 14:45:48 +10:00
Andrew Tridgell c62197370a GPS: replaced the GPS auto-detect mechanism 
the old mechanism wasted most of the input bytes, and chewed a lot of
CPU, making it impractical to do GPS detection for a GPS attached
after startup

The new code is async, and detects a GPS by looking for a fully formed
packet with the right checksum for each GPS type
 2012-09-17 14:45:47 +10:00
Andrew Tridgell 08cf9823fd RC_Channel_aux: minor cleanups 
remove unused enable_out_ch() and enable k_manual channels. This
ensures k_manual channels used for bottle drop are initialised
correctly to trim output
 2012-09-16 15:50:13 +10:00
Andrew Tridgell 644b3c6e17 RC_Channel: support channel reversal on range channels 
this makes it possible to have a reverse throttle in ArduPlane
 2012-09-16 15:06:26 +10:00
rmackay9 9965dd8b1a HIL: changes to fix HIL for ArduCopter after recent timing changes. 
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
 2012-09-15 18:42:56 +09:00
Michael Oborne f9c11627a5 fix AP attitude hil - with randys help 2012-09-15 16:47:18 +08:00
rmackay9 54d07f6d04 ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
rmackay9 3c0153e9dc AP_AHRS: fix to allow example sketch to compile 2012-09-13 16:45:52 +09:00
Andrew Tridgell efabf7403e GPS: NMEA bug fix from Alexey Kozin 
thanks Alexey!
 2012-09-12 15:04:24 +10:00
Andrew Tridgell 715541b508 AHRS: added AHRS_BARO_USE parameter 
allow disabling of the use of the barometer for vertical acceleration
compensation
 2012-09-12 14:42:04 +10:00
Andrew Tridgell f5efb25e62 APM: added wdt.h for SITL build of APM 2012-09-10 15:52:53 +10:00
rmackay9 8624b0138e AP_InertialSensor_Stub: added num_samples_available method to fix HIL build 2012-09-10 11:38:13 +09:00
rmackay9 d8142c2351 AP_InertialSensor_MPU6000: move _last_sample_time_micros to capture time data_interrupt was called 2012-09-10 11:38:08 +09:00
rmackay9 bd3eab7c0f AP_InertialSensor: use AP_TimerProcess's queue_process to run read from MPU6000 after any currently running processes complete 2012-09-10 11:38:03 +09:00
rmackay9 b1b3b806ad AP_PeriodicProcess: queue_process changes to suspend other processes before running queued process 
Also restored suspend_timer to void return type
 2012-09-10 11:37:58 +09:00
rmackay9 5a3645d36a AP_ADC: added num_samples_available to allow main loop to be synced with arrival of new sensor data for Oilpan. 2012-09-10 11:37:43 +09:00
rmackay9 38feee9c61 AP_IMU: added num_samples_available to allow main loop timing to be synced with arrival of new data from IMU. 2012-09-10 11:37:38 +09:00
rmackay9 3901387c8d AP_InertialSensor: changed read of sensor from MPU6000 to happen immediately 
This reduces the delay between when data arrives and when it is used
by up to 1ms.

Added num_samples_available method to all InertialSensors to allow
main loop timing to be synced with sensors.
 2012-09-10 11:37:33 +09:00
Craig Elder b667c6eb8c APM_RC: fixed noisy PWM output on startup for APM2 
This reduces the number of rubbish pulses on the APM2 PWM output pins
on startup, which should help with booting some cheaper ESCs.

Thanks to Randy for the idea!
 2012-09-10 08:09:28 +10:00
Andrew Tridgell 5060b8bd2e AP_Camera: updated for new RC_Channel_aux API 2012-09-08 15:13:06 +10:00
Andrew Tridgell 540f7894dc AP_Mount: updated for new RC_Channel_aux API 2012-09-08 15:12:52 +10:00
Andrew Tridgell 89dc79fded RC_Channel: simplified RC_Channel_aux and fixed issue 725 
it is perfectly valid to configure two RC channels with the same
function, especially when that function is manual output (ie. copy
input to output)

This removes the g_rc_function[] indirection array
 2012-09-08 15:12:28 +10:00
Andrew Tridgell 8f70a24fd4 AHRS: added AHRS_WIND_MAX option 
this allows APM to cope better with airspeed sensor failure, but
ensuring airspeed stays within AHRS_WIND_MAX of ground speed
 2012-09-08 11:37:07 +10:00
Andrew Tridgell c983de9d8b APM_OBC: changed termination servo values, and added loop counter 2012-09-08 11:37:00 +10:00
Andrew Tridgell 9d6bce87dc APM_OBM: Failsafe board sketch 
this combines with the OBC failsafe module
 2012-09-08 10:07:17 +10:00
Andrew Tridgell 8836851243 APM_OBC: handle separate terminate pin correctly 2012-09-08 10:07:14 +10:00
Andrew Tridgell 6a90b7722a OBC: added FS_TERM_PIN option 
this sets a pin for flight termination
 2012-09-08 10:07:08 +10:00
Andrew Tridgell 2e7939cbf4 Mavlink: enable MAVLINK_SEPARATE_HELPERS 
this fixes a seq number problem with SIMSTATE packets
 2012-09-08 10:06:19 +10:00
Andrew Tridgell b555d86ec0 Compass: added compass.accumulate() API 
this allows us to accumulate mag readings using spare CPU cycles
 2012-09-08 10:05:54 +10:00
rmackay9 20936fb87d RC_Channel_aux: bug fix which could cause channel to be assigned to the wrong function and miss others 2012-09-02 12:46:04 +09:00
Andrew Tridgell 39a4c6e861 SITL: use AP_Declination code to get right compass dec for autotest 2012-08-29 13:33:01 +10:00
Pat Hickey 0cef8ea12d APM_RC_APM1.cpp: Bugfix on mapping of SetFastOutputChannels to ICR reg 
* Previously had the ICR register for ch1/2/9 (on timer5) swapped with
  ch3/4/10 (on timer1).
* This bug probably didn't make a difference in operation since
  SetFastOutputChannels is typically only used for copters, where at
  least CH1,2,3,4 would be set to fast all at once.
 2012-08-28 17:12:41 -07:00
Andrew Tridgell 7ab7770c3d APM: added the ability to forcibly crash the plane on OBC failsafe breach 
this allows a user to setup the OBC failsafe system to forcibly crash
the plane (surfaces at limits, zero throttle) when the failsafe system
triggers. This is to allow APM to be used in the Outback Challenge. In
the OBC an external failsafe board also does this using the heartbeat
control pin, so this is an extra safety mechanism.

To prevent users accidentially triggering a crash, this code only
activates if FS_TERM_ACTION is set to to the magic value 42.
 2012-08-28 20:18:24 +10:00
Andrew Tridgell 60a6fed34a APM_OBC: don't use _saved_wp when zero 2012-08-28 20:18:23 +10:00
Andrew Tridgell fc942b2ff9 APM: removed reset_I() and instead auto-reset integrator in PID library 
this prevents us resetting key integrators on waypoint change, while
still preventing old integrators being used when a PID starts to be
used again
 2012-08-28 20:18:23 +10:00
Andrew Tridgell aaa4e64238 SITL: zero wind for first 15s 
this allows for airspeed calibration on startup
 2012-08-28 20:18:23 +10:00
rmackay9 67252c8a9b AP_InertialSensor_MPU6000: bug fix. DMP was being enabled by default so although the results were not being used, this caused a delay in the main loop 2012-08-28 17:02:07 +09:00
Craig Elder a4834b5219 Revert "APM1: Delay serial3 init to not brick Xbee radios" 
This reverts commit 25d14a9d6a4a1ea60eb78485296298c98c1595d0.
 2012-08-27 15:00:23 -07:00