Randy Mackay
39ba406957
Copter: add trapezoid frame type
...
We still need to properly define the motor mixing for the trapezoid
frame in AP_MotorsQuad.cpp
2013-03-31 12:41:02 +09:00
James Bielman
5631f865b2
Update floating point calculations to use floats instead of doubles.
...
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
Andrew Tridgell
03b26c7d6d
AP_Motors: fixed setup of ESC update speeds
2013-01-10 15:52:46 +11:00
Andrew Tridgell
e7dea077b4
AP_Motors: fixed example sketch
2013-01-02 22:02:46 +11:00
Andrew Tridgell
374af1cd14
build: change from Arduino.mk to apm.mk
2013-01-02 17:29:37 +11:00
Andrew Tridgell
f91ddf5df9
AP_Motors: removed board type define
2013-01-02 15:27:58 +11:00
rmackay9
3aca61cefb
AP_Motors: remove unnecessary opposite_motor array (no longer needed with new stability patch)
2013-01-02 09:19:17 +11:00
Andrew Tridgell
a1187519a8
AP_HAL: use AP_HAL_BOARD_DRIVER in remaining test sketches
2012-12-20 14:52:37 +11:00
Pat Hickey
eb530b86e8
move Arduino.mk to /mk/Arduino.mk
2012-12-20 14:52:35 +11:00
Andrew Tridgell
7d27e420ae
AP_HAL: remove unnecessary Arduino.h includes
2012-12-20 14:52:30 +11:00
Pat Hickey
3cc204321c
AP_Motors_Class: add Progmem typedef
2012-12-20 14:52:30 +11:00
Andrew Tridgell
7582c882e6
Motors: updates for new AP_Param API
2012-12-20 14:51:39 +11:00
Pat Hickey
475da4eca4
CONFIG_HAL_BOARD - test sketches fixed up, build all passes
2012-12-20 14:51:37 +11:00
Pat Hickey
c6fe5e5340
AP_Motors: ported to AP_HAL
2012-12-20 14:51:26 +11:00
Pat Hickey
3f1d9d7f69
AP_Param: #include <AP_Param.h> fixups for libraries & sketches
...
* I mostly went through with grep and added an #include <AP_Param.h> below
every #include <AP_Common.h>. Not all of these example sketches might
strictly need AP_Param.
2012-12-20 14:51:19 +11:00
rmackay9
a38db6744f
AP_Motors: add comments for parameters
2012-12-10 21:37:20 +09:00
Robert Lefebvre
0eb57bf93d
ACM: TradHeli
...
Fix to make update_throttle_cruise work with stab_throttle scaling.
2012-12-08 15:12:39 -05:00
Robert Lefebvre
a5c4e65cdf
ACM: TradHeli
...
Fix for Rotor Speed Controller to switch on/off with Ch8 as opposed to the old way (throttle).
2012-12-04 15:09:27 -05:00
Robert Lefebvre
6b1fee767a
ACM: TradHeli
...
Creating Stab_Collective Function to allow for different collective ranges between Stabilize and other modes.
This makes for a smoother collective action in Stabilize mode with manual throttle, while still allowing full collective travel in Acro and other modes.
2012-11-26 19:37:20 -05:00
rmackay9
50a4838879
AP_Motors, AP_RangeFinder, Filter: fixes to example sketches
2012-11-08 00:29:43 +09:00
rmackay9
0159d8bd35
AP_Motors: bug fix to reached_limits so by default it returns true if any limits have been breached
2012-10-31 22:00:17 +09:00
rmackay9
c0cf2d6f38
AP_Motors: added reached_limit method which returns bit mask indicating which control inputs could not be achieved
2012-10-11 17:19:54 +09:00
rmackay9
c320938ff2
AP_MotorsMatrix: modified stability patch to sacrifice yaw first if necessary to ensure stability.
...
Resolves climb-on-yaw problem.
2012-10-09 15:48:15 +09:00
rmackay9
6ed59fba91
AP_Motors: enable throttle curve by default
2012-09-25 23:36:35 +09:00
rmackay9
bc2aa84394
AP_Motors: remove stray debug message re set-up of throttle curve
2012-09-23 12:25:31 +09:00
Robert Lefebvre
9e32d45d7b
Change to the "Stability Patch" in Motors_Matrix in order to make it cover both the upper throttle range and lower, and also to cause it to raise/lower all motors when a single motor goes out of ranges.
2012-09-19 20:43:58 -04:00
rmackay9
93ae29a3e9
ArduCopter: added throttle curve (although disabled by default) for all multicopters
2012-09-18 23:05:08 +09:00
rmackay9
9e66b555cb
ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library
2012-09-13 21:31:13 +09:00
uncrustify
744ad19630
uncrustify libraries/AP_Motors/AP_MotorsHeli.h
2012-08-21 19:19:52 -07:00
uncrustify
b1b1975018
uncrustify libraries/AP_Motors/AP_MotorsHeli.cpp
2012-08-21 19:19:52 -07:00
uncrustify
40dcf9e7a8
uncrustify libraries/AP_Motors/AP_MotorsOctaQuad.h
2012-08-21 19:04:07 -07:00
uncrustify
3a5b8c5482
uncrustify libraries/AP_Motors/AP_MotorsOcta.h
2012-08-21 19:04:07 -07:00
uncrustify
4a44c6a1ba
uncrustify libraries/AP_Motors/AP_MotorsTri.h
2012-08-21 19:04:07 -07:00
uncrustify
d773a9c43b
uncrustify libraries/AP_Motors/AP_Motors.h
2012-08-21 19:04:07 -07:00
uncrustify
4fe97c1e7b
uncrustify libraries/AP_Motors/AP_MotorsMatrix.h
2012-08-21 19:04:07 -07:00
uncrustify
b8cc5ac4af
uncrustify libraries/AP_Motors/AP_MotorsY6.h
2012-08-21 19:04:07 -07:00
uncrustify
4cb9f57565
uncrustify libraries/AP_Motors/AP_MotorsHexa.h
2012-08-21 19:03:59 -07:00
uncrustify
d3c856e889
uncrustify libraries/AP_Motors/AP_MotorsQuad.h
2012-08-21 19:03:59 -07:00
uncrustify
5ec922104a
uncrustify libraries/AP_Motors/AP_MotorsHexa.cpp
2012-08-21 19:03:59 -07:00
uncrustify
b982cca74e
uncrustify libraries/AP_Motors/AP_Motors.cpp
2012-08-21 19:03:59 -07:00
uncrustify
cc0c424eed
uncrustify libraries/AP_Motors/AP_MotorsY6.cpp
2012-08-21 19:03:59 -07:00
uncrustify
dc21cc1003
uncrustify libraries/AP_Motors/AP_MotorsOctaQuad.cpp
2012-08-21 19:03:59 -07:00
uncrustify
c7f8c4dfa7
uncrustify libraries/AP_Motors/AP_MotorsMatrix.cpp
2012-08-21 19:03:59 -07:00
uncrustify
6c33f81e9d
uncrustify libraries/AP_Motors/AP_MotorsOcta.cpp
2012-08-21 19:03:59 -07:00
uncrustify
41c1205f26
uncrustify libraries/AP_Motors/AP_MotorsQuad.cpp
2012-08-21 19:03:35 -07:00
uncrustify
df5d1a8aef
uncrustify libraries/AP_Motors/AP_MotorsTri.cpp
2012-08-21 19:03:35 -07:00
uncrustify
364b089bd3
uncrustify libraries/AP_Motors/examples/AP_Motors_test/AP_Motors_test.pde
2012-08-21 19:03:35 -07:00
Robert Lefebvre
575b99b4be
TradHeli: Creating Flybar Acro mode.
2012-08-21 16:54:01 -04:00
Robert Lefebvre
bf6c934c32
Changing TradHeli param motors.acro_mode to motors.flybar_mode to better reflect it's intent.
2012-08-20 23:13:50 -04:00
Robert Lefebvre
e6b5af7143
Adding new Trad Heli parameters.
2012-08-20 16:45:19 -04:00
Jason Short
e12ce1d5a7
MOTORS Mixer: temp removal of Yaw Contrib code
2012-08-09 17:00:11 -07:00
Andrew Tridgell
518d6365ff
AP_Param: update remaining libraries for new constructor syntax
2012-08-08 12:11:57 +10:00
Robert Lefebvre
4ffc5e211a
Fixing Trad Heli Ext ESC Controller
...
-Added ramp-down rate instead of instantly setting ramp to zero when throttle is dropped to bottom. This is to allow "warm-restart" if shutdown was unintentional.
-Actual ESC still goes to zero while throttle is dropped to the bottom, only the ramp counter winds down slowly behind the scenes.
2012-07-31 17:47:25 -04:00
rmackay9
acef75319c
AP_MotorsMatrix: small bug fix to limit checking on remove_motor call. Fix thanks to Michael Peschel!
2012-07-16 00:38:58 +09:00
Robert Lefebvre
ed235a3924
Change to prevent Tricopter servos from going hard-over during Disarmed state.
...
Believe this was an oversight when the change to AP_Motors went in.
2012-07-13 23:12:26 -04:00
Robert Lefebvre
8ce9aae2f7
Instituting Yaw Differential on Multirotors. Intent is to stop "rise on yaw input".
...
Since motors with increasing speed due to yaw input seem to generate more thrust that motors that slow lose thrust, thus net thrust goes up, causing copter to climb.
Values are a guesstimate, proven out by test flying. This could probably become a parameter.
2012-07-13 22:59:28 -04:00
rmackay9
b5f47f5e63
AP_Motors: clarified some doxygen descriptions for TradHeli
2012-07-05 08:46:50 +09:00
Robert Lefebvre
238a1ced2c
TradHeli adding ramp up time to Ch8 Throttle Pass-through.
2012-06-07 22:55:47 -04:00
Robert Lefebvre
df17ff3bc1
AP_MotorsHeli Syntax correction.
2012-06-04 15:53:07 -04:00
rmackay9
c82a403b88
AP_MotorsHeli: Added reference to "Arduino.h" to allow autotest builder to work.
...
Moved around initialisation of parmeters in AP_MotorHeli object to remove compiler warnings.
2012-06-02 16:13:23 +09:00
Robert Lefebvre
5f058fb9b2
TradHeli: Incorporating Ext ESC Control
2012-05-30 21:50:25 -04:00
Robert Lefebvre
56335e81e4
Fix TradHeli Collective Yaw Effect bug.
2012-05-25 15:25:21 -04:00
rmackay9
357d6c2d9b
ArduCopter: bug fix for reversing tri servo
...
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
2012-05-13 12:36:46 +09:00
Adam M Rivera
56d3fa1601
Parameters.pde/AP_MotorsHeli: Updated comments to leverage the new value aliases
2012-04-28 20:50:41 -05:00
Adam M Rivera
239323eaa4
Parameters.pde/AP_MotorsHeli.cpp: Added comments from Roberts clone.
2012-04-26 18:26:14 -05:00
rmackay9
11a384a7ff
AP_Motors - allow tail servo to be reversed. Closes ArduCopter issue #228
2012-04-21 23:07:57 +09:00
rmackay9
53827f2e92
AP_MotorsMatrix - fixed stability patch issue in which it would not limit a motor's output unless an opposite motor had been defined. This would only have affected Y6 frames.
2012-04-07 12:16:12 +09:00
rmackay9
127a990509
AP_MotorsOcta - V Frame - test order fix spotted by David Wiens
2012-04-07 08:11:28 +09:00
rmackay9
f6e1509d05
AP_Motors - fixed last "shadowing" compiler warning caused by badly named parameter in auto_armed method.
2012-04-05 00:28:04 +09:00
rmackay9
1e20d7de88
AP_MotorsMatrix - fixed another compiler error regarding shadowing a variable. Fixed by removing those the angle and direction arrays which weren't even used
2012-04-05 00:24:56 +09:00
rmackay9
7a8973eaf0
AP_MotorsHeli - fixed compiler warning re move_swash function declared with int parameters in .h file but actually using int16_t in .cpp file. They're the same in arduino but perhaps the build checker is a little more strict that Arduino.
2012-04-05 00:06:33 +09:00
rmackay9
926211f0f0
AP_Motors - fix compiler warning re shadowing a variable caused by badly named parameter in armed function.
...
Another compiler warning fixed in AP_MotorsMatrix.cpp caused by declaring "i" twice.
2012-04-04 23:59:51 +09:00
rmackay9
b71877366e
ArduCopter - AP_Motors library - added new library which has few advantages over current code:
...
1. it's step towards rearchitecting the current code base ahead of a move to RTOS.
2. internally it uses a MatrixTable for the Quad, Octa, OctaQuad, Y6 frames.
3. it implements the missing stability patch for Octa and OctaQuads (still missing for Y6)
Later check-ins will incorporate into the main ArduCopter code.
2012-04-02 17:26:37 +09:00