Andrew Tridgell
f472da8e90
Plane: added ONESHOT_MASK parameter
...
after discussion with Paul on servo latency
2021-07-23 14:47:14 +10:00
Andrew Tridgell
1ae669bb01
Plane: added manual input expo for MANUAL, ACRO and TRAINING
...
this is easier than setting up mode specific expo in radios for flying
in manual modes
2021-07-23 14:47:14 +10:00
Andrew Tridgell
c0d942af4c
Plane: disable EKF3 default airspeed fusion by default
...
this fusion can cause problems with wind estimation, disable by
default for now
2021-07-22 18:20:45 +10:00
Andrew Tridgell
8e6abf5976
ArduPlane: replaced Pixhawk with more appropriate wording in docs
2021-07-22 07:48:12 +10:00
Peter Barker
e3b8fc6646
ArduPlane: remove ability to use DCM as AHRS
2021-07-21 21:01:39 +10:00
Hwurzburg
ac76a63931
ArduPlane: remove values metadata from log bitmask
2021-06-30 09:24:26 +09:00
Peter Barker
055e82276e
ArduPlane: remove HIL support
2021-06-15 09:47:31 +10:00
Hwurzburg
e958306343
Plane: Add options to USE_REVERSE_THRUST to cover all flight modes
2021-06-15 07:05:02 +10:00
Andrew Tridgell
0937d903a1
Plane: use HAL_EFI_ENABLED
2021-06-09 18:07:00 +10:00
vierfuffzig
9a538ba15b
ArduPlane: fix advanced param metadata
2021-05-25 12:36:59 +10:00
Hwurzburg
09fb9a8e58
Plane: limit speed scaling in Autotakeoff wo AS sensor option
2021-04-20 09:07:09 +10:00
Andrew Tridgell
96059a6387
Plane: allow for AUTOTUNE_LEVEL==0
2021-04-15 06:57:16 +10:00
Andrew Tridgell
a35d8e584d
Plane: change param prefixes for roll/pitch controllers
2021-04-15 06:57:16 +10:00
Andrew Tridgell
e5308db8c2
Plane: added FLIGHT_OPTIONS bit to enable yaw control in ACRO mode
...
this allows for yaw damper in ACRO, which is important on some
vehicles with no vertical stabilize
See
https://discuss.ardupilot.org/t/rudderless-split-rudder-flying-wing/69273/4
2021-04-15 06:22:29 +10:00
Iampete1
60d26723ae
Plane: make TERRAIN_FOLLOW at AP_int32 bitmask, per mode option
2021-03-24 10:15:18 +11:00
Iampete1
660d301f9b
Plane: chan param converison
2021-03-17 19:18:46 +11:00
Iampete1
cca5e62c89
Plane: move RST_SWITCH_CH to RCx_OPTION
2021-03-17 19:18:46 +11:00
Iampete1
7226a3a9dc
Plane: move FBWA_TDRAG_CHAN to RC Options
2021-03-17 19:18:46 +11:00
Iampete1
5f555e5314
Plane: move CHUTE_CHAN to RC Options
2021-03-17 19:18:46 +11:00
Iampete1
eeab196d91
Plane: move RST_MISSION_CH to RC option
2021-03-17 19:18:46 +11:00
Stavros Korokithakis
29043d62e9
Add FLIGHT_OPTION to climb before RTL
2021-03-16 11:58:47 +11:00
Samuel Tabor
ed48558985
ArduPlane: Correct description of KFF_THR2PTCH parameter.
2021-03-12 20:11:02 -08:00
Siddharth Purohit
1b8519ee53
ArduPlane: move underscore one layer down for GPS
2021-03-12 16:32:36 +09:00
James O'Shannessy
198ec9a678
ArduPlane: Fix use of nullptr when AC_FENCE configured as DISABLED
...
Parameter upgrade needs to grab singleton as the fence library may not be built in to plane.
2021-03-05 16:48:57 +11:00
James O'Shannessy
2c66e164d0
ArduPlane: Improvements to parameter upgrading between versions
2021-03-05 14:52:46 +11:00
James O'Shannessy
af733b2f09
ArduPlane: Convert and remap old parameters
2021-03-05 14:52:46 +11:00
James O'Shannessy
c316711351
ArduPlane: Add conversion from ArduPlane geofence param to AC_Fence param
2021-03-05 14:52:46 +11:00
James O'Shannessy
aae092b88f
ArduPlane: Remove all unused geofence capability
...
ArduPlane: Remove missed geofence logic
2021-03-05 14:52:46 +11:00
James O'Shannessy
17fb585bf1
ArduPlane: Add support for AC_Fence
...
ArduPlane: Remove some geofence logic from ArduPlane
ArduPlane: Refactor action and mode return implementation
ArduPlane: Use polyfence to find the return point.
2021-03-05 14:52:46 +11:00
Tom Pittenger
c653ff880a
Plane: extend Stream rates param count to match MAVLINK_COMM_NUM_BUFFER
2020-12-29 07:52:09 -07:00
Habibullah Oladepo
739fec001f
Plane: Fix typos in Parameters.cpp
2020-12-13 10:51:38 -08:00
Andrew Tridgell
cd2f2f96eb
rename barometer parameters to BARO prefix
2020-12-08 13:22:17 +11:00
Andy Piper
fa454da315
Plane: allow OSD for TX-only screens
2020-11-11 18:13:11 +11:00
Samuel Tabor
589382cbb4
Plane: Add THERMAL mode to Parameters.cpp metadata.
2020-09-25 11:34:48 -07:00
Samuel Tabor
10111f92d5
Plane: Rename SOARING_ENABLED to HAL_SOARING_ENABLED and don't compare to ENABLED.
2020-09-24 07:30:48 +10:00
Peter Barker
15372e9213
ArduPlane: replace '@User: User' with '@User: Standard'
2020-09-22 14:56:04 +10:00
Andy Piper
c057be8ed1
Plane: conditionally compile ADSB support
2020-09-22 09:33:51 +10:00
Tom Pittenger
db10ad2e54
Plane: update USE_REV_THR param description to include landing pattern
2020-09-17 07:31:43 -07:00
Hwurzburg
96f5e2a20a
Plane: Update THR_FAILSAFE param metadata
2020-09-04 07:08:03 +10:00
Siddharth Purohit
fb180fa431
Plane: move to using CANManager library
2020-08-19 17:31:09 +10:00
Andrew Tridgell
3c705d1c60
Plane: added THR_FAILSAFE=2 option
...
this allows for RC inputs to be ignored at low throttle, but won't
trigger failsafe. It is meant for users flying BVLOS missions, where
they want GCS failsafe enabled, but don't want RC failsafe, and want
to be sure that RC inputs will be ignored at low RC throttle values
Thanks to suggestion from Pompecukor
2020-08-07 14:01:20 +10:00
Andy Piper
b649afe9e5
Plane: make mount/gimbal inclusion configurable per-board
2020-08-04 09:18:14 +10:00
Samuel Tabor
419f7c9998
Plane: Convert SOAR_ENABLE_CH to RCX_OPTION.
2020-07-21 09:38:04 +10:00
Paul Riseborough
97d7d563c4
ArduPlane: Improve parameter description for FWD_BAT_VOLT_MAX/MIN
2020-06-16 10:17:33 +10:00
vierfuffzig
147ebb74f4
Plane Parameters: fix THR_MAX param description
...
makes clear that thr is constrained in stabilized modes too unless passthrough is set, aligns with THR_MIN description.
2020-06-12 10:23:41 +10:00
Buzz
0f5177b291
Plane: Support a set of offboard MAVLink guided controls with rates
...
+ 3 rounds of fixes
2020-05-20 15:03:21 +10:00
Andrew Tridgell
8b21f5117a
Plane: implement RTL_CLIMB_MIN parameter
...
this allows for an initial climb on RTL where roll is limited to
LEVEL_ROLL_LIMIT
2020-05-18 13:04:04 +10:00
Paul Riseborough
40cc5a5006
ArduPlane: Improve EKF failsafe in VTOL modes
...
Replicates Copter behaviour with a three step process if the EKF sustains a loss of navigation as detected by high GPS innovation test ratios:
1) Attempts a yaw reset using the GSF estimate if available
2) Attempts a lane switch
3) Falls back to a non-position mode
2020-05-14 10:40:48 +10:00
Peter Barker
8222b5db62
Plane: AP_Soaring no longer takes AHRS in constructor
2020-05-05 17:35:14 +10:00
Iampete1
3ded030fa8
Plane: compensate forward throttle for battery voltage drop
2020-05-05 09:46:41 +10:00