Commit Graph

5216 Commits

Author SHA1 Message Date
Randy Mackay a9f257ddc6 Copter: 3.5.3 release notes 2017-09-21 11:13:02 +09:00
Andrew Tridgell 22bfec4d2a Copter: fixed motor runup check for heli
for all auto-throttle modes we should not allow a mode change to the
mode if the motor runup is not complete.

This moves the code to the set_mode() so it applies to all modes

fixes issue #6956
2017-09-21 08:52:50 +10:00
Andrew Tridgell 8cf8f3a288 Copter: fixed collective input with H_SV_MAN=1 for heli
when H_SV_MAN=1 we do direct pass-thru so the user can test swash
range. The problem is that it uses norm_input() for throttle, which
depends on RC3_TRIM. Nowhere else in heli or copter do we depend on
RC3_TRIM, so the user gets a misleading idea of behaviour when testing
their swash.
2017-09-21 08:52:50 +10:00
Randy Mackay a8a5c1d332 Copter: command-long DO_SET_HOME check first param is zero
Also do not use current location just because lat,lon,alt are all zero
2017-09-20 12:14:38 +09:00
Randy Mackay d982cfed4a Copter: accept DO_SET_HOME within COMMAND_INT 2017-09-20 12:14:38 +09:00
Randy Mackay 70cf21a5ba Copter: accept more mav-frame types
accept mav frames whether or not they have _INT appended
2017-09-20 12:14:38 +09:00
Peter Barker 45d056fcf0 Copter: ekf position checks are done before we call failsafe_ekf_event 2017-09-19 12:44:43 +01:00
Peter Barker d5caff3f1b Copter: do not enter ekf-failsafe based on position if pos not needed 2017-09-19 12:44:43 +01:00
Peter Barker ff82f23cf6 Copter: factor out a ekf_check_position_problem method 2017-09-19 12:44:43 +01:00
Peter Barker 84a873a520 Copter: remove redundant check; we will never failsafe_ekf_event if disarmed
See line 37
2017-09-19 12:44:43 +01:00
Peter Barker 0afe1e7473 Copter: move handling of SET_GPS_GLOBAL_ORIGIN up 2017-09-19 15:44:23 +09:00
Randy Mackay 1b3cc9289b Copter: support SET_GPS_GLOBAL_ORIGIN
also remove setting of origin from DO_SET_HOME command
initialise ekf_origin location when consuming SET_GPS_GLOBAL_ORIGIN
set_ekf_origin performs sanity check on location
2017-09-19 10:30:15 +09:00
Randy Mackay 44a436642b Copter: complete rename to SmartRTL
Also fix parameter description for CH7_OPT
2017-09-15 08:58:14 +09:00
Michael du Breuil ffc2aeee32 Copter: Support landing flight termination 2017-09-13 13:15:08 -07:00
Peter Barker 6b5fd5fbdd Copter: move gcs_out_of_time into GCS object 2017-09-12 18:28:07 +01:00
Randy Mackay b1d1b5122b Copter: 3.5.3-rc1 release notes 2017-09-12 16:43:15 +09:00
squilter 4b57a4a231 Copter: rename SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
squilter 7abb5b10fc Copter: build scripts changed from SafeRTL to SmartRTL 2017-09-09 14:05:41 +09:00
Randy Mackay ed0203e53c Copter: smooth safertl return journey using fast waypoints 2017-09-09 14:05:41 +09:00
Randy Mackay 6684e3de56 Copter: minor comment change for SafeRTL 2017-09-09 14:05:41 +09:00
Randy Mackay 8df042f00c Copter: complete addition of SafeRTL flight mode 2017-09-09 14:05:41 +09:00
Randy Mackay 218983d594 Copter: safe-rtl changes after peer review 2017-09-09 14:05:41 +09:00
squilter ba0e08552f Copter: add SafeRTL flight mode 2017-09-09 14:05:41 +09:00
squilter ec8c4b1744 Copter: add AP_SafeRTL to build 2017-09-09 14:05:41 +09:00
Peter Barker 3f67dfe4fe Copter: move handling of do_send_banner up 2017-08-30 15:54:47 +01:00
Peter Barker 3da70f19c1 Copter: handle param_request_list in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker e6ac68fd2a Copter: handle param_set in GCS_MAVLINK base class 2017-08-30 15:54:47 +01:00
Peter Barker bb06db6389 Copter: move send_autopilot_request calls up to GCS base class 2017-08-30 15:54:46 +01:00
Peter Barker 470e790117 Copter: add constant structure holding firmware version 2017-08-30 15:54:46 +01:00
squilter 00ace08b54 Copter: minor formatting fixes 2017-08-30 20:07:11 +09:00
Peter Barker 30fac9160e Copter: mavlink PERF messages also spit out average and standard deviation 2017-08-29 21:31:46 +01:00
Peter Barker 89e6e70235 Copter: remove MAIN_LOOP_RATE in favour of parameter value 2017-08-29 08:41:07 +09:00
Peter Barker 02a590024d Copter: base loop time remaining on variable loop rate 2017-08-26 09:33:45 +09:00
Peter Barker 0b6de644fb Copter: add ArduSub to list of SYSID_SW_TYPE 2017-08-24 19:50:38 +09:00
Peter Barker 5103739ea3 Copter: remove unused CH6 defines 2017-08-24 19:48:17 +09:00
Lucas De Marchi be402374ea ArduCopter: use FALLTHROUGH define
When falling through on a case switch, allow to add an empty statement
with the correct attribute to tell the compiler this behavior is
intended.
2017-08-22 23:59:13 -07:00
Randy Mackay 34560fb1fb Copter: remove enabled check from optflow init 2017-08-23 11:19:14 +09:00
Randy Mackay def17582c6 Copter: integrate simpler Log_Write_EKF 2017-08-23 11:19:14 +09:00
Peter Barker b0c7766197 Copter: continuously reevaluate rc calibration checks
Stop "latching" calibration checks - if an RC radio's calibration
changes after it passes once, these patches allow the rc calibraiton
checks to then fail.
2017-08-21 09:05:31 +09:00
Peter Barker 19e409f7f4 Copter: move serial_control case to base class 2017-08-17 12:42:31 +01:00
Peter Barker 6db348bab3 Copter: move play_tune and led_control handling to base class 2017-08-17 12:27:10 +01:00
Peter Barker aa06fc499c Copter: use GCS_MAVLINK subclasses to handle set_mode 2017-08-16 11:58:10 +10:00
Michael du Breuil 5cfe4d5a8c Copter: Expose the AFS instance to MAVLink 2017-08-15 15:14:56 +01:00
Peter Barker 0a2177de58 Copter: move Copter RC checking code into library 2017-08-14 15:32:25 +09:00
Randy Mackay 14f6d3e03e Copter: 3.5.2 release notes 2017-08-14 12:12:01 +09:00
Peter Barker c6b9c84d1f Copter: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker fa2b500e93 Rover: remove CLI 2017-08-14 10:23:50 +09:00
Peter Barker 55af774e98 Copter: send gps messages as separate queued messages 2017-08-09 16:18:22 +01:00
Peter Barker 56160a8bbd Copter: move sending of gps_raw up 2017-08-09 16:18:22 +01:00
Peter Barker ff81186951 Copter: move sending of system_time up 2017-08-09 16:18:22 +01:00