Commit Graph

82 Commits

Author SHA1 Message Date
Andrew Tridgell 1bdf6173ec AP_NavEKF3: removed have_ekf_logging 2020-11-10 16:15:45 +11:00
Andrew Tridgell f3c3778169 prevent duplicate EKF logging
vehicle code sometimes tries to log the same data twice
2020-11-10 16:15:45 +11:00
Andrew Tridgell 096aab9388 AP_NavEKF3: convert to use AP_DAL for new replay structure
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
2020-11-10 16:15:45 +11:00
Peter Barker fc49b55b85 AP_NavEKF3: make coreBetterScore const 2020-11-03 10:39:35 +11:00
Randy Mackay 7b898ee001 AP_NavEKF3: minor comment and format fixes 2020-10-28 12:17:40 +09:00
Paul Riseborough 16ae75a681 AP_NavEKF3: Consolidate and log tilt error variance calculation 2020-10-26 11:03:50 +11:00
Peter Barker 83d784c22d AP_NavEKF3: fix includes 2020-10-20 11:40:54 +11:00
Randy Mackay eeb1a1846c AP_NavEKF3: replace prearm_healthy with pre_arm_check 2020-10-07 11:53:07 +11:00
Andrew Tridgell 2bc7d17e7a AP_NavEKF3: improved core comparison to check alignment
this adds coreBetterScore() which takes account of tilt and yaw
alignment when comparing cores for lane switching

this ensures we don't switch to a lane that is unaligned due to the
zero error score for unaligned lanes
2020-09-14 20:29:04 +10:00
Harshit Kumar Sankhla edc3709653 AP_NavEKF3: implement sensor affinity using EK3_AFFINITY parameter
this allows the EKF core index to be used to select a GPS/baro/mag
instance. This is an alternative to GPS blending that allows EKF lane
switching to be used to select the right combination of GPS and IMU
add logging to XKFS message
2020-08-27 20:20:51 +10:00
Harshit Kumar Sankhla d7edc946b6 AP_NavEKF3: Relative Error based Lane-Switching
Improvments to the lane selection logic, we accumulate error for each
EKF lane relative to the primary for a more robust core selection
2020-08-27 20:20:51 +10:00
chobits 4b8be2e535 AP_NavEKF3: fix comments 2020-08-04 18:16:18 +10:00
Paul Riseborough 8ff6780323 AP_NavEKF3: Clarify distinct use cases for 'takeoff expected' 2020-07-07 15:33:58 +10:00
Peter Barker 2e55584417 AP_NavEKF3: correct comments on getFilterFaults and getFilterTimeouts methods 2020-07-07 10:50:41 +10:00
Randy Mackay dccc3e22d9 AP_NavEKF3: minor comment fix re RNG_USE_HGT 2020-06-24 21:16:50 +09:00
Paul Riseborough ed5b695c94 AP_NavEKF3: Clarify intended use of setTerrainHgtStable accessor 2020-06-24 21:16:50 +09:00
Randy Mackay 0f212ca727 AP_NavEKF3: accept extnav at up to 50hz 2020-06-09 09:42:14 +10:00
Randy Mackay 93d8458d2a AP_NavEKF3: FuseVelPosNED uses ext nav vel err in obs data check 2020-06-02 08:33:42 +09:00
chobits c7817eaca1 AP_NavEKF3: support VISION_SPEED_ESTIMATE
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>
2020-06-02 08:33:42 +09:00
Randy Mackay ef02942459 AP_NavEKF3: writeBodyFrameOdom accepts delay 2020-05-15 10:07:52 +09:00
Randy Mackay c28fd27b02 AP_NavEKF3: writeExtNavData accepts delay 2020-05-15 10:07:52 +09:00
priseborough c5e465aec9 AP_NavEKF3: add external nav system support
includes decoupling height source from use of external nav data
2020-04-30 15:55:59 +09:00
Andrew Tridgell 7e010ef50a AP_NavEKF3: use set_enable() to set enable flag 2020-04-29 07:36:55 +10:00
Randy Mackay 86d221708c AP_NavEKF3: more white space fixes 2020-04-24 09:43:23 +10:00
Randy Mackay c1ef894a30 AP_NavEKF3: getDataEKFGSF and getYawData pass by reference 2020-04-24 09:43:23 +10:00
Paul Riseborough 410b5825fb AP_NavEKF3: Enable use of EKF-GSF yaw estimate
AP_NavEKF3: Add emergency yaw reset using a Gussian Sum Filter estimate

AP_NavEKF3: Reduce default minimum GPS velocity noise for Copters

Enables fail-safe to be set with more sensitivity and improves tracking accuracy.
Origin values were set using typical GPS performance for receivers on sale 6 years ago. Receiver performance has improved since then.

AP_NavEKF3: Prevent constant mag anomaly yaw resets

Prevents constant magnetic anomaly induced resets that can be triggered when flying with vehicle generated magnetic interference.
Allows for two resets per takeoff. Allowance for two resets is required, becasue a large ground based magnetic yaw anomaly can cause a sufficiently large yaw innovation that two resets in close succession are required.

AP_NavEKF3: Add option to fly without magnetometer

AP_NavEKF3: Rework emergency yaw reset logic

Use a separate external accessor function to request the yaw reset.
Allow reset requests to remain active for a defined period of time.
Tidy up reset function to split out accuracy check.

AP_NavEKF3: Fix vulnerability to lane switch race condition

Prevents the situation where a lane switch results in a lane being selected that does not have the correct yaw. This can occur if the primary lane becomes unhealthy before the external failsafe monitor has time to react.

AP_NavEKF3: Fix EKF_MAG_CAL = 6 behaviours

Fix bug causing the yaw alignment to be performed at startup before the GSF had a valid estimate.
Fix bug causing emergency yaw message to be output for a normal reset.
Fix vulnerability to reported negative yaw variance.
Remove duplicate timer checks.

AP_NavEKF3: Update EK3_MAG_CAL documentation

AP_NavEKF3: Relax yaw gyro bias convergence check when not using mag

AP_NavEKF3: Reduce yaw drift in hover with no yaw sensor

Uses the GSF yaw estimate if available which is better than the EKF's own yaw when no yaw sensor is available.
2020-04-24 09:43:22 +10:00
Randy Mackay 22c9081c83 AP_NavEKF3: minor comment fix 2020-04-15 19:35:30 +09:00
Andrew Tridgell 3ae0b0d446 AP_NavEKF3: added using_external_yaw() method
needed by AHRS for attitudes_consistent() check
2020-04-11 21:14:31 +10:00
Peter Barker e289020332 AP_NavEKF3: stop taking ahrs in constructor 2020-01-21 11:53:18 +11:00
Peter Barker 03cca68c5a AP_NavEKF3: use instance number when logging rather than multiple message IDs 2019-12-17 12:22:07 +11:00
Peter Barker 9ed37e4486 AP_NavEKF3: make send_status_report const 2019-12-11 07:54:41 +09:00
Peter Barker 4431d01230 AP_NavEKF3: stop relying on the presence of a RangeFinder 2019-12-11 08:09:01 +11:00
Randy Mackay b4a8691a9e AP_NavEKF3: remove wheel encoder update limit 2019-10-22 07:15:48 +08:00
Jaaaky 54f8e1137e AP_NavEKF3: added EK3_MAG_EF_LIM parameter
Adapted from EKF2 implementation as of commits
3835d2613, e9ed3540f and df4fc0fff
this sets a limit on the difference between the earth field from the
WMM tables and the learned earth field inside the EKF. Setting it to
zero disables the feature. A positive value sets the limit in mGauss.
2019-10-20 07:34:35 +11:00
Paul Riseborough 5b1d9ed868 AP_NavEKF3: Add missing vertical position derivative calculation 2019-10-18 11:15:25 +09:00
Andrew Tridgell 3995db49a4 AP_NavEKF3: use parent class for intermediate static variables
this makes the code faster as well as using less memory when both EK2
and EK3 are enabled
2019-10-01 15:39:03 +10:00
Andrew Tridgell 96c6544997 AP_NavEKF3: moved intermediate variables to common memory
this moves intermediate variables from being per-core to being common
between cores. This saves memory on systems with more than one core by
avoiding allocating this memory on every core.

This is an alternative to #11717 which moves memory onto the stack. It
doesn't save as much memory as #11717, but avoids creating large stack
frames
2019-09-24 12:51:54 +10:00
Michael du Breuil 9a7d64e8fc AP_NavEKF3: Allow the GPS to be responsible for logging 2019-09-10 09:09:17 +10:00
Andrew Tridgell 451fe840ee AP_NavEKF3: ensure that EKF origin stays in sync on all cores
this prevents the EKF origin on different cores from being initialised
to different values. A common value is stored in the frontend and used
by a core if it doesn't have an origin
2019-07-29 10:08:22 +10:00
priseborough 87c7649d09 AP_NavEKF3: Add interface for yaw angle measurements 2019-07-13 11:05:57 +10:00
Peter Barker ce45baa034 AP_NavEKF3: factor out and logging functions, reuse for 2nd core 2019-07-06 19:05:51 +10:00
Peter Barker f3f364de26 AP_NavEKF3: move logging in from AP_Logger 2019-07-06 19:05:51 +10:00
Michael du Breuil b624f6f008 AP_NavEKF3: Reduce scope of AP_Baro.h 2019-06-27 14:56:21 +10:00
Andrew Tridgell 60831c2878 AP_NavEKF3: added checkLaneSwitch()
this allows the vehicle code to ask the EKF to change lanes if it is
about to do an EKF failsafe
2019-06-12 09:52:20 +10:00
Randy Mackay 0a5d6a430a AP_NavEKF3: accept optical flow data at up to 50hz 2019-05-11 16:23:57 +09:00
Michael du Breuil fe3b29a088 AP_NavEKF3: Allow checking all cores for health 2019-04-09 10:53:25 +10:00
Paul Riseborough 0d3e1a7d23 AP_NavEKF3: flow use parameter improvements 2019-04-02 10:51:12 +11:00
Paul Riseborough b848e231c7 AP_NavEKF3: Add parameter to control how optical flow data is used 2019-04-02 10:51:12 +11:00
Mark Whitehorn 3c432cf25c AP_NavEKF3: add getQuaternionBodyToNED 2019-03-29 10:58:00 +11:00
Arjun Vinod f382a657bd AP_NavEKF3: fixed typos 2019-02-26 08:33:39 +11:00