tridge60@gmail.com
4e71884298
added memory reporting over MAVLink
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3207 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-09-01 00:52:08 +00:00
tridge60@gmail.com
aebed8d283
remove MAVLINK_COMM_NUM_BUFFERS
...
this is in GCS_MAVLink.h now
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3201 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-31 05:26:07 +00:00
analoguedevices@gmail.com
6c79b1c681
Correct the spelling of Michael O's name ;-)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3197 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-30 20:14:29 +00:00
tridge60@gmail.com
f868cd90e4
we should not be calling mavlink_delay() in the CLI
...
(this reverts svn 3050 from Jason)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3167 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-24 08:17:36 +00:00
mich146@hotmail.com
1a2f26a285
version increment
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3157 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 06:27:51 +00:00
tridge60@gmail.com
d4a1e86854
mavlink: don't execute action commands in mavlink_delay()
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3156 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 06:16:37 +00:00
mich146@hotmail.com
4a974180b8
Level fix.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3155 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 05:52:45 +00:00
jasonshort
e0425af1f4
hack to fix Motor lights when arming after init.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3101 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:56:31 +00:00
jasonshort
75114aa93f
hack to fix Motor lights when arming after init.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3100 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:54:29 +00:00
jasonshort
6b2139221d
Added experimental rate based Loiter and revised RTL. You need to compile with the loiter option set to 1 in APM_Config to try.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3099 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:18:32 +00:00
jasonshort
c95bb66441
cleared out APM_Config
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3098 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 18:15:42 +00:00
jasonshort
312c0e6b3b
removed throttle_slew - Just wasn't working well enough and added too much complexity
...
moved reading sonar to the 50hz loop so the Mode filter could do it's thing without causing so much latency
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3094 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 02:30:37 +00:00
jasonshort
bfa7cc2cb5
lowered error limit to try and reduce RTL dropping from sky.
...
removed minimum for RTL nav speed to see it's Loiter potential (rate based Loiter)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3093 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 22:51:35 +00:00
jasonshort
56d8da0381
commented out home.alt since it's always 0
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3092 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 22:49:20 +00:00
jasonshort
900d0c1819
fixed missing %d in CTUN
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3091 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 22:45:00 +00:00
rmackay9@yahoo.com
37dd9ac144
TradHeli - fixes to use single PI controller for roll, pitch and yaw (when using an external tail gyro)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3089 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 09:37:01 +00:00
tridge60@gmail.com
88cd556c8d
Compass: we don't need MAG_PROTOCOL any more
...
we only have one mag driver now
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3084 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 05:10:19 +00:00
tridge60@gmail.com
6ca3a2b359
compass: set the orientation of compass before compass.init()
...
the compass.init() code uses the orientation when calculating the
calibration. We need to use the right orientation.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3071 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 12:52:53 +00:00
jasonshort
8715ed3bd7
2.0.39
...
added callback to the test functions… not sure if this is the correct thing to do.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3050 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-08 22:20:50 +00:00
jasonshort
b7ce6e036e
2.0.39
...
Change the way Rate nav works. we now take into account both forward *and lateral* rates. The signs may be backward so be careful! Let me know if the quad shoots off to one side and I'll flip the signs.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3049 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-08 16:54:56 +00:00
rmackay9@yahoo.com
51a9c52d58
ACM - changed default lens for optical flow
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3039 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 13:15:19 +00:00
jasonshort
1ac8e0a75f
2.0.39
...
added a define to make compilation optional
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3031 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 17:09:27 +00:00
jasonshort
de191b7bee
2.0.39
...
Cleanup and removed some old tests to save data flash.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3030 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:47:44 +00:00
jasonshort
99a327ccbf
2.0.39
...
Moved the motors based on feedback from Max Levine. See Wiki for details.
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3029 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:46:46 +00:00
jasonshort
4752468730
2.0.39
...
Simplified the CUT_MOTORS section of the code.
Added Stability patch
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3028 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:45:51 +00:00
jasonshort
3e8ca40d7d
2.0.39
...
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3027 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:44:42 +00:00
jasonshort
64932a4e75
2.0.39
...
New order for motors!! Based on Hein's testing. See Wiki for updated layouts
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3026 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:44:22 +00:00
jasonshort
87a015b205
2.0.39
...
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3025 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:43:44 +00:00
jasonshort
e7a87006b0
2.0.39
...
New hex a motors_out with Tridge's stability patch.
Simplified the CUT_MOTORS section of the code.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3024 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:43:16 +00:00
jasonshort
04e05604a5
2.0.39
...
added defines for CH7 behavior - DO_FLIP 1, DO_SET_HOVER 0 (Default)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3023 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:22:43 +00:00
jasonshort
b931bfaf50
2.0.39
...
added defines for CH7 behavior
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3022 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:21:55 +00:00
jasonshort
a8445483f3
2.0.39
...
added defines for CH7 behavior, Tweaked Loiter config based on testing by Jack.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3021 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:21:21 +00:00
jasonshort
0bea96c3d0
Added Jose Julio's Flip code, edited to work with AC2. Never flown or tested!
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3020 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:19:06 +00:00
jasonshort
9e1bea4797
Added Jose Julio's Flip code, edited to work with AC2. Never flown or tested!
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3019 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 16:17:26 +00:00
tridge60@gmail.com
2da62b8a3e
fixed PSTR() on motor arm messages
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3004 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-02 13:34:27 +00:00
tridge60@gmail.com
11cee834b2
re-added ARMING messages in HIL mode
...
this is useful as in HIL mode you don't always have blinking lights
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3003 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-02 13:25:58 +00:00
jasonshort
76972a265a
2.0.39
...
Returned to previous log version for sonar messages to fix the cosmetic bug in the planner
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3000 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 22:01:25 +00:00
jasonshort
e60b2ac07e
2.0.39
...
Made the Yaw on RTL always on for Helis
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2999 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 22:00:26 +00:00
jasonshort
07e2ad1c50
2.0.39
...
Defaulted all values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2998 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 21:56:22 +00:00
tridge60@gmail.com
9fa60889dd
added SERIAL3_BAUD parameter
...
this is the real baud rate divided by 1000. So 57600 is set as 57
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2997 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 11:39:17 +00:00
tridge60@gmail.com
366b20bb9f
MAVLink: send streams on both mavlink interfaces
...
when doing init the user may be on the Xbee port
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2996 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 10:08:59 +00:00
tridge60@gmail.com
dd3dfd9f2a
re-apply DEFAULT_LOG_BITMASK patch
...
Jason, I assume you removed this patch accidentially
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2995 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 10:06:15 +00:00
tridge60@gmail.com
9371ee545e
process MAVLInk packets during gps detection and IMU calibration
...
this allows the GCS to connect immediately on startup
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2994 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 08:08:52 +00:00
jasonshort
fe3293f411
2.0.39
...
Added reset for all nav I when entering manual modes.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2992 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 05:12:10 +00:00
jasonshort
1f974ef6d3
2.0.39
...
Added extra groundstart init for the Ground Station
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2991 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 04:47:15 +00:00
jasonshort
61f0cb9226
2.0.39
...
Changed how the throttle_slew was added to the output.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2990 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 03:48:16 +00:00
jasonshort
0cb38abd07
2.0.39
...
Added a limiter to Throttle_slew to not make the throttle go past 800.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2989 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-01 03:39:44 +00:00
jasonshort
5152d23650
2.0.39
...
mistake on the defaults for kP - not symmetrical.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2985 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 20:09:27 +00:00
jasonshort
8e02e89534
2.0.39
...
mistake on the defaults for kP - not symmetrical.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2984 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 20:06:36 +00:00
jasonshort
4223dff94e
2.0.39
...
limit RTL to 35°
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2983 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 19:57:35 +00:00