Commit Graph

172 Commits

Author SHA1 Message Date
Andrew Tridgell e1a13edf3d RC_Channel: fixed example build 2014-08-13 22:12:30 +10:00
Andrew Tridgell 2e5913df93 RC_Channel: fixed k_manual for set_servo_limit()
this allows for failsafe takeover of k_manual channels, which fixes
the behaviour for ignition failsafe
2014-08-09 22:50:14 +10:00
Andrew Tridgell 0d4985079e RC_Channel: added support for LimitValue settings
this allows you to set a channel failsafe or radio_out to a limit
value
2014-04-21 11:52:41 +10:00
Andrew Tridgell 7f4178d967 RC_Channel: added setup_failsafe_trim_all() function
sets all channels to output trim values on FMU failure
2014-04-21 08:37:24 +10:00
Randy Mackay 8600b9d4f1 RC_Channel: add parachute_release to function enum 2014-04-07 13:36:33 +09:00
Andrew Tridgell 11f196318e RC_Channel: added static functions to simplify operations on all channels
this avoids vehicle code having to loop over all channels for common
operations
2014-04-03 12:18:56 +11:00
Andrew Tridgell 8c0c9c317e RC_Channel: prevent a numerical exception with bad mount parameters 2014-03-26 17:38:27 +11:00
Andrew Tridgell 6039eab442 RC_Channel: support up to 12 aux channels on PX4
this allows RC13 and RC14 to work correctly as aux outputs on Pixhawk
2014-03-25 15:42:48 +11:00
Andrew Tridgell 68462025ba RC_Channel: constrain norm_input() to -1 to 1
if RC is not properly calibrated we could get a value beyond 1, which
could cause some flight modes to exceed the roll/pitch limits of the
aircraft
2014-03-15 20:43:13 +11:00
Andrew Tridgell dd502e98b4 RC_Channel: added support for separate wheel steering channels on planes 2014-03-05 12:57:50 +11:00
Andrew Tridgell a788405c8b RC_Channel: added percent_input() function
useful for plane flaps
2014-03-05 09:17:50 +11:00
Mike McCauley be34e0358a RC_Channel: Removed duplicate defines from RC_Channel.h 2014-03-03 06:34:34 +11:00
Andrew Tridgell e11ada7bf0 RC_Channel: fixed comment on enable_aux_servos()
thanks to Mike McCauley for spotting
2014-02-18 09:25:07 +11:00
Andrew Tridgell 00d2d5946c RC_Channel: added disable_aux_channel()
this will be used by copter to ensure motor channels are not enabled
for aux functions
2014-02-06 21:30:55 +11:00
Andrew Tridgell b4208c7fc0 RC_Channel: added flaperon1 and flaperon2 function outputs 2014-02-06 12:35:32 +11:00
Andrew Tridgell 698736b66d RC_Channel: simplify the setup of aux channels
avoid the nasty mess of #if lines, as the info is in the constructor
anyway
2014-02-06 10:17:16 +11:00
Andrew Tridgell f6d888e0da RC_Channel: added disable_out() method 2013-12-20 11:58:53 +11:00
Andrew Tridgell e245bb07c2 RC_Channel: improved docs for RCn_FUNCTION=0 2013-12-16 11:17:26 +11:00
Randy Mackay f8e2947823 RC_Channel: parameter @Units to pwm 2013-11-26 22:34:28 +09:00
Randy Mackay 330687a754 RC_Channel: formatting 2013-10-31 15:23:52 +09:00
Andrew Tridgell 97b7130bb9 libraries: update license header to GPLv3
we switched to GPLv3 a long time ago, but neglected to update the
per-file license headers
2013-08-30 13:01:39 +10:00
Andrew Tridgell a12991923e RC_Channel: prevent overwrite of memory on high RC_Channel constructor 2013-08-18 11:42:23 +10:00
Randy Mackay e4ca7d2fdf AC_Sprayer: first implementation 2013-08-05 21:11:09 +09:00
Andrew Tridgell fef6a76078 RC_Channel: rename 'Manual' to RCPassThru
this should make it clearer what it does
2013-07-26 16:07:00 +10:00
Andrew Tridgell 21859f9364 RC_Channel: fixed dead_zone for range channels
The dead_zone was being used inconsistently, used in PWM space in one
place, and in control output space in another.

The fix required us to move the index number of the RC channel eeprom
value for RCn_DZ, as users will have a throttle deadzone of 3 set in
their eeprom due to a bug that Randy just fixed that caused the value
to always be saved to eeprom. In plane we then need to fix the
deadzone for the throttle to be 30

this fixes issue #303

Thanks to Soren Kuula for spotting this!
2013-07-13 13:18:54 +10:00
Randy Mackay fb5ada38c0 RC: example sketch uses set_default_dead_zone 2013-07-12 11:44:58 +09:00
Randy Mackay 47437b9ddf RC: set dead zone only if parameter has not been set by user 2013-07-12 11:44:16 +09:00
Andrew Tridgell 6b7b69a048 RC_Channel: added secondary rudder support
this is used when nose wheel steering needs different reverse/range
from rudder
2013-06-29 17:31:03 +10:00
Andrew Tridgell 02252b5387 RC_Channel: removed reference to dip switches 2013-06-03 17:49:56 +10:00
Andrew Tridgell c0058bbb03 RC_Channel: added output_trim() and read() functions
these make using rcmap in the plane code easier
2013-06-03 16:23:48 +10:00
Andrew Tridgell 0438952a8b RC_Channel: removed global rc_ch[] array
hide it as a object static instead
2013-06-03 16:23:47 +10:00
Andrew Tridgell c96ac5edbb RC_Channel: fixed indent-tabs-mode 2013-05-30 09:48:45 +10:00
Andrew Tridgell b71f36ee34 RC_Channel: support 8 auxillary RC channels
needed for full 12 channel support on PX4
2013-04-25 20:10:53 +10:00
Andrew Tridgell a093926b04 Revert "RC_Channel: removed pwm_out variable from RC_Channel"
This reverts commit 8e4a003d8d.

It is used by MotorsMatrix
2013-03-29 22:36:29 +11:00
Andrew Tridgell 8e4a003d8d RC_Channel: removed pwm_out variable from RC_Channel
saves 16 bytes
2013-03-29 19:32:52 +11:00
Michael 5d91b06de3 RC_Channel: added secondary elevator support 2013-02-05 08:57:28 +11:00
Andrew Tridgell 9b4c75c66b RC_Channel: don't change trim if radio in is zero 2013-01-25 20:44:36 +11:00
James Bielman 5631f865b2 Update floating point calculations to use floats instead of doubles.
- Allows use of hardware floating point on the Cortex-M4.
- Added "f" suffix to floating point literals.
- Call floating point versions of stdlib math functions.
2013-01-16 13:52:01 +11:00
Andrew Tridgell 374af1cd14 build: change from Arduino.mk to apm.mk 2013-01-02 17:29:37 +11:00
Andrew Tridgell cd430cb6a8 RC_Channel: added no_deadzone version of set_pwm() 2012-12-20 22:41:58 +11:00
Andrew Tridgell ceb3f577d8 libraries: use new math functions 2012-12-20 14:53:22 +11:00
Andrew Tridgell 22ada8b9c3 RC_Channel: fixed example build 2012-12-20 14:52:36 +11:00
Pat Hickey eb530b86e8 move Arduino.mk to /mk/Arduino.mk 2012-12-20 14:52:35 +11:00
Andrew Tridgell 7d27e420ae AP_HAL: remove unnecessary Arduino.h includes 2012-12-20 14:52:30 +11:00
Pat Hickey a28c614fbe remove RC_Channel2 test sketch: deprecated by AP_HAL 2012-12-20 14:51:40 +11:00
Andrew Tridgell 4aa16303ed RC_Channel: updates for new AP_Param API 2012-12-20 14:51:39 +11:00
Pat Hickey 475da4eca4 CONFIG_HAL_BOARD - test sketches fixed up, build all passes 2012-12-20 14:51:37 +11:00
Pat Hickey afa1143506 RC_Channel: ported to AP_HAL
* keeping everyone honest
* remove second unmaintained unit test:  No idea wtf is going on in there.
2012-12-20 14:51:26 +11:00
Pat Hickey 3f1d9d7f69 AP_Param: #include <AP_Param.h> fixups for libraries & sketches
* I mostly went through with grep and added an #include <AP_Param.h> below
  every #include <AP_Common.h>. Not all of these example sketches might
  strictly need AP_Param.
2012-12-20 14:51:19 +11:00
rmackay9 49619b15dd RC_Channel: move RC_CHANNEL_ANGLE, RANGE, ANGLE_RAW type definitions to .h file so they can be used by the main sketch 2012-12-09 16:42:58 +09:00