Commit Graph

204 Commits

Author SHA1 Message Date
jasonshort 5a841e41c0 Yaw fix for Max Y6
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1810 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-24 01:36:52 +00:00
tridge60@gmail.com 53549f14a6 undid accidentical commit of local changes
sorry about that!

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1806 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:35:54 +00:00
tridge60@gmail.com 5820e19696 fixed printf() format error
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1805 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:59 +00:00
tridge60@gmail.com de442b7a3c separate out automatic reset of modes and radio
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1804 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:51 +00:00
tridge60@gmail.com ac7c6358e9 added ALWAYS_RESET_SETTINGS
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1803 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:45 +00:00
tridge60@gmail.com 9e8ef19150 allow configuration of motor arming condition
This allows the user to configure their own motor arming condition in
APM_Config.h. For example, the user could set it up for MODE1
transmitters, by using:

 #define MOTOR_ARM_CONDITION (g.rc_3.control_in == 0 && g.rc_1.control_in > 2700)
 #define MOTOR_DISARM_CONDITION (g.rc_3.control_in == 0 && g.rc_1.control_in < -2700)

You could also set it up to use the "throttle cut" switch on a
transmitter, by mapping that to a spare channel.

The default (throttle minimum and maximum/minimum yaw) is the same as
it was before

This patch also adds reporting of motor arming to the GCS, which can
be useful for testing.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1802 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:38 +00:00
tridge60@gmail.com 966cacf906 tridge: report mode switch changes
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1801 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:32 +00:00
tridge60@gmail.com 7c4b7cba0a tridge: my config
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1800 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:30:24 +00:00
tridge60@gmail.com aa91c2c1f2 adapt send_text() for typesafe PSTR()
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1799 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-21 07:26:59 +00:00
mich146@hotmail.com 117c533154 implement mavlink messages
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1793 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-20 12:55:51 +00:00
jasonshort b1ffabc9a3 Added Y6 support
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1792 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 19:21:43 +00:00
tridge60@gmail.com 56e8179486 mavlink: support MAV_FRAME_GLOBAL_RELATIVE_ALT
this allows for relative altitude, but global lat/lon

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1791 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:23:08 +00:00
tridge60@gmail.com d09800f6f9 disabled tabs in emacs formatting markers
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1790 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:20:11 +00:00
tridge60@gmail.com 5385e19f35 make it possible to enable RC override on non-HIL setups
this makes it possible to allow a GCS to override RC input values for
non-HIL setups. This gives a way for a GCS to set an arbitrary switch
value, or set a precise PWM value for any control.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1789 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:18:21 +00:00
tridge60@gmail.com c34a86be89 added send_text_P()
this merges the send_text_P() updates from APM

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1788 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 10:14:15 +00:00
tridge60@gmail.com 0374781c56 mavlink: merged in changes from APM
this fixes waypoint upload

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1787 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-19 08:05:06 +00:00
tridge60@gmail.com 9baf649923 added update_events() prototype
this fixes a build error on Linux. See the equivalent commit in APM

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1786 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:46 +00:00
tridge60@gmail.com 48539f7b49 HIL: fixed a build error with HIL
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1785 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:39 +00:00
tridge60@gmail.com bc662fa134 mavlink: reduce the number of message buffers to 2
this is all we need, and it saves us some SRAM

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1784 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:33 +00:00
tridge60@gmail.com 0370eeba8c added sonar test
useful to check calibration of the sonar

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1783 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-18 01:50:27 +00:00
jasonshort 119194d443 removed startup_IMU_ground
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1780 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-17 17:47:04 +00:00
jasonshort 01a4f764bf Fix for reversed pitch in SIMPLE mode.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1779 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-17 05:05:16 +00:00
jasonshort 2bee76b0b8 fix for Loop timing issue.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1776 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-16 05:43:48 +00:00
jasonshort 984e6c7928 removed debug code
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1775 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-15 05:55:51 +00:00
jasonshort 323f2bfa59 Update to get SIMPLE mode running.
Seems to work!

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1774 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-15 05:54:48 +00:00
jasonshort 602a4fb423 Added new Simple mode - Better version of FBW that is offset by initial yaw angle and not north.
Added new navigation control based on bearing_error so we can leverage Crosstrack correction.
I've done limited testing on this.

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1773 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-14 06:04:07 +00:00
jasonshort cee3e2d57e alignment with APM 2.0
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1772 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-13 06:25:38 +00:00
dhcorley@msn.com 64b5eb90fe cleaned up unneeded integer in xbee test
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1771 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 23:03:56 +00:00
dhcorley@msn.com 66c9ded2d8 Update rawgps cli test with indicator LED.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1770 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 23:00:40 +00:00
jasonshort 732446eb3a fix for Logging, motors_out buffer overrun, formatting.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1769 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 21:37:37 +00:00
jasonshort 20fdbda315 enable logs default
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1768 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-11 02:49:12 +00:00
jasonshort 667aa34fbd Fixed new Xbee Test bug
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1767 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-10 21:27:22 +00:00
jasonshort 3fc86e7048 New Xbee Test Implemented
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1766 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-10 19:25:54 +00:00
DrZiplok a07e3aa7fc Remove a stale reference to APM_BinComm.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1765 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-10 06:25:02 +00:00
mich146@hotmail.com 2389bf58a9 ACM fix old mavlink reference. (use new GCS_mavlink library)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1764 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-10 01:06:27 +00:00
dhcorley@msn.com 69f6dd6265 Applied changes for rawgps cli test mode.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1763 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-09 14:48:49 +00:00
jasonshort 61b96075cf lots of minor changes, Logs should be working better now.
Pos hold is now called "Loiter" - I don't want to have a flight mode called HOLD POS...



git-svn-id: https://arducopter.googlecode.com/svn/trunk@1761 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-09 07:00:48 +00:00
jasonshort 8114b717f2 lots of minor changes, Logs should be working better now.
Pos hold is now called "Loiter" - I don't want to have a flight mode called HOLD POS...



git-svn-id: https://arducopter.googlecode.com/svn/trunk@1759 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-09 06:37:09 +00:00
tridge60@gmail.com 7f330fbb6c added C coding style headers to a few more files
this helps for people running editors like emacs that can read these
and set the right tab levels

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1758 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-08 12:20:48 +00:00
jasonshort be709de318 fixed PID setting bug.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1755 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 21:22:55 +00:00
jasonshort d94ce4bb92 moved Mag offsets to "test","stabilize"
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1754 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 19:06:29 +00:00
jasonshort af71b3a764 Added break feature on yaw control. Please verify it works properly before flying.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1753 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 17:19:38 +00:00
jasonshort 02029ab20c Added break feature on yaw control. Please verify it works properly before flying.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1752 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 16:59:58 +00:00
jasonshort 1fe9a84e2c bug fixes and updates
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1751 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 06:00:27 +00:00
jasonshort 97107d89d2 bug fixes and updates
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1750 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-07 00:57:06 +00:00
tridge60@gmail.com 756a5b0052 HIL: we need very fast update of motor controls for HIL
When doing HIL with a copter you need to update the controls very
rapidly, much more so than with a plane. This puts the update in the
fast loop

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1749 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-06 09:36:03 +00:00
tridge60@gmail.com f7f48ebb20 mavlink: fixed store of parameter values to eeprom
setting parameters via mavlink only saves them in memory. We need to
use AP_Var::save_all() to save them permanently

git-svn-id: https://arducopter.googlecode.com/svn/trunk@1748 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-06 09:35:57 +00:00
tridge60@gmail.com a05c374de1 HIL: fill motor_out[] when disarmed, so HIL sees zero values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1747 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-06 09:35:50 +00:00
jasonshort 4fbf2e4fac upped WP to 15 bytes
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1746 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-05 20:50:49 +00:00
jasonshort 9e8e4e6af6 Just aligning tabs
git-svn-id: https://arducopter.googlecode.com/svn/trunk@1744 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-03-05 05:15:12 +00:00