Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
48,574 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

952 Commits

Author SHA1 Message Date
Mohammad Hefny 11944811df AP_HAL_Linux: define board features on Linux module 2021-11-29 19:02:38 +09:00
Mohammad Hefny 8ce6d7e101 AP_HAL: define board features 2021-11-29 19:02:38 +09:00
Andrew Tridgell ae3b21b28a AP_HAL: added serial option for disabling FIFO on uarts 2021-07-22 19:07:36 +09:00
Andrew Tridgell 4e4646d9d7 AP_HAL: allow for double EKF build 2021-07-22 19:07:36 +09:00
Siddharth Purohit c7185a1e7f AP_HAL: split into HAL_CANMANAGER_ENABLED and HAL_ENABLE_LIBUAVCAN_DRIVERS 2021-06-24 09:02:42 +10:00
Siddharth Purohit 5acce3055f AP_HAL: Use HAL_ENABLE_CANMANAGER instead of HAL_ENABLE_LIBUAVCAN_DRIVERS 2021-06-24 09:02:42 +10:00
Andy Piper 61f1c3c9ce AP_HAL: add 1Hz update_channel_masks() 2021-06-22 09:55:27 +10:00
Peter Barker dddd0d6a14 AP_HAL: remove HIL support 2021-06-15 09:47:31 +10:00
Tom Pittenger 806b6a63bf AP_HAL: reorganize precompiler for HAL_ENABLE_LIBUAVCAN_DRIVERS and HAL_MAX_PROTOCOL_DRIVERS 2021-06-09 18:36:18 +10:00
Andrew Tridgell 7c5c805381 AP_HAL: removed perf counters 2021-06-07 14:29:27 +10:00
Andrew Tridgell d8a6d9c5c4 AP_HAL: added uart_info() method 2021-06-05 18:52:33 +10:00
Andrew Tridgell 606c248e69 AP_HAL: fixed build on boards with no PWM 
this impacts mRoNexus builds
 2021-06-02 15:39:30 +10:00
bugobliterator ae80e2dd4d AP_HAL: move ToneAlarm Types to AP_Notify instead 2021-05-31 07:34:02 +10:00
Andy Piper 4f547d2acc AP_HAL: allow motor poles to be recorded 
enable ESC telemetry for SITL
 2021-05-12 17:01:11 +10:00
Andy Piper 4d4d3683b6 AP_HAL: add accessor for UART dma status 2021-05-05 17:50:42 +10:00
Andy Piper 3428cbf993 AP_HAL: add dshot command codes for beeps, leds and motor control 
allow more than one type of ESC for dshot commands
add support for checks around active ESCs
allow dshot alarm to be disabled
allow prioritized dshot commands
 2021-05-05 17:41:24 +10:00
Jacob Walser f7da853adb AP_HAL: update hardware definitions for navigator r3 2021-04-07 15:08:18 -04:00
Jacob Walser 421638453f AP_HAL: update Notify LED hardware for navigator r3 2021-04-07 15:08:18 -04:00
Andy Piper f29dba2ddd AP_HAL: add set_dshot_rate() 2021-04-06 10:24:04 +10:00
Andrew Tridgell ebc1f9acf6 AP_HAL: removed assert calls 
these waste flash space and do not do us any good
 2021-03-25 14:03:40 +11:00
Andrew Tridgell 7010eae9e8 AP_HAL: remember details of register check fails 
this allows for logging of register resets
 2021-02-24 18:18:37 +11:00
Andy Piper a07b238c7d AP_HAL: add PRIORITY_RCOUT 
don't allow UART copies
add @SYS/uarts.txt
 2021-02-20 14:37:11 +11:00
Patrick José Pereira 12cd138030 AP_HAL: Remove pointer check before delete 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2021-02-04 09:01:19 +11:00
Andy Piper 0eff201016 AP_HAL: add mem_info() 
Co-authored-by: Andrew Tridgell <andrew@tridgell.net>
 2021-02-03 23:35:44 +11:00
Patrick José Pereira 6899c0b5af AP_HAL: Add missing const in member functions 
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
 2021-02-03 18:45:14 +11:00
Arsh 18f56fbac5 AP_HAL:examples:Printf: Improvements in the Printf example 2021-02-03 13:02:49 +11:00
Andrew Tridgell 6163659887 AP_HAL: prevent a single bad transfer causing an IMU to be marked unhealthy 
This is a response to this issue:
https://discuss.ardupilot.org/t/gyro-problem-after-waypoint-log-analisys

The 2nd gyro went bad with a large offset. Then the first gyro was
marked unhealthy, forcing the EKF to switch to the 2nd gyro. That
resulted in a crash.

I think the SPI bus was getting bad transfers and the register check
code happened to get a bad transfer, thereby marking the first gyro
unhealthy

This change ensures we only fail the register check if two transfers
in a row are bad. This makes it much less likely that a noisy bus will
lead to an unhealthy gyro
 2021-01-27 09:47:55 +11:00
Andrew Tridgell 1680e6e7d6 AP_HAL: expose load_persistent_params() in hal.util 2021-01-21 13:09:21 +11:00
Andrew Tridgell a9f8c9517c AP_HAL: added vnav linux target 2021-01-20 10:06:45 +11:00
Andrew Tridgell 6ca68bfba3 AP_HAL: enable 32k storage on SITL 2021-01-16 06:47:10 +11:00
Andrew Tridgell 75c789fc57 AP_Baro: added ExternalAHRS backend 2021-01-05 21:13:12 +11:00
Arsh 3d5addeee0 AP_HAL:examples:AnalogIn: Added comments in the AnalogIn example 2021-01-05 20:43:04 +11:00
Andrew Tridgell 96cbde0ee6 AP_HAL: use ExpandingString class 2021-01-05 10:52:00 +11:00
Tom Pittenger afaca30075 AP_HAL: add helpers le24toh_ptr(), be24toh_ptr(), put_le24_ptr(), put_be24_ptr() 2020-12-30 17:56:38 -08:00
Andy Piper 1c79f22ba2 AP_HAL: make erpm accessible from RCOutput 
give access to erpm error rate
add bi-directional dshot mask modifier
 2020-12-30 19:14:16 +11:00
Andy Piper 9e7c60178d AP_HAL: rename system_initialized() and add is_system_initialized() 2020-12-30 18:16:59 +11:00
Andy Piper c8e464ebea AP_HAL: add HAL_ENABLE_THREAD_STATISTICS to boards 2020-12-30 18:15:05 +11:00
Ari Krupnik cfb1213f43 AP_HAL: standard spelling of variant 2020-12-25 00:01:50 +11:00
Andrew Tridgell 19723e6e75 AP_HAL: make uart pointers private 
this ensures they cannot be used by library or vehicle code, so we
will be able to remove them in future
 2020-12-15 10:32:46 +11:00
Andrew Tridgell 195ec0316a AP_HAL: fixed example fw for SERIAL naming 2020-12-15 10:32:46 +11:00
Andrew Tridgell 95c0852b13 AP_HAL: convert to using hal.serial() instead of hal.uartX 2020-12-15 10:32:46 +11:00
Andrew Tridgell 8678759da4 AP_HAL: added hal.serial() access to uarts 
this gives access to serial ports in the SERIALn_ order. It is inlined
by the compiler so using hal.uartB and hal.serial(3) generates
idential code on stm32 (tested on H7).

This is a step towards eliminating hal.uartX completely and the
horrible uartB ordering
 2020-12-15 10:32:46 +11:00
Tom Pittenger 6630645915 AP_HAL: ap_periph should disable HAL_SUPPORT_RCOUT_SERIAL by default 2020-12-09 07:53:09 -08:00
Andy Piper d2e01005ee AP_HAL: add support for @SYS/dma.txt for DMA contention 2020-12-02 18:17:23 +11:00
Andrew Tridgell 68fdf033ee AP_HAL: support uartI, allowing a total of 9 uarts 
this allows for OTG2 on the MatekH743 board, which makes SLCAN much
easier
 2020-11-30 14:09:31 +11:00
Tom Pittenger 089f3aa349 AP_HAL: allow hwdef to define HAL_SUPPORT_RCOUT_SERIAL - must be disabled for AP_Periph 2020-11-25 14:20:53 +11:00
Andrew Tridgell 5e8380ff41 AP_HAL: allow replay on ChibiOS 2020-11-10 16:15:45 +11:00
Andrew Tridgell 2596875ceb AP_HAL: removed fs_init() 
this must go via AP_Filesystem
 2020-10-27 10:45:03 +11:00
Peter Barker 3cce6197a1 AP_HAL: delete copy constructors 2020-10-13 19:55:34 +11:00
Pierre Kancir 1c80b04544 AP_HAL: add virtual set_cmdline_parameters() 2020-10-13 10:31:21 +11:00