Peter Barker
|
c6aa243a2b
|
AP_Proximity: cope with polyfence holding boundary points
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
6064f22615
|
AC_Fence: move polygon points into AC_Fence_Polygon
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
63256a6df5
|
AP_Math: define != for Vector2<int>
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
eea711be66
|
StorageManager: add write_uint8 alias for write_byte
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
dc5852dad8
|
AP_InternalError: add a general should-not-be-here bit
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
4e793e7169
|
GCS_MAVLink: squelched rally-points-received message
|
2020-02-05 10:09:54 +11:00 |
Willian Galvani
|
f70da511c4
|
sub: fixup joystick changes according to review
https://github.com/ArduPilot/ardupilot/pull/11861
|
2020-02-05 10:09:54 +11:00 |
Justin
|
1f2afd9953
|
joystick: addressed issue9801. Upon engaging input hold, the controller will not read new directional inputs until input hold is disabled or the conrols are returned to their neutral position.
|
2020-02-05 10:09:54 +11:00 |
Willian Galvani
|
c660ad8a9a
|
Sub: update calibration if reading is above water level
|
2020-02-05 10:09:54 +11:00 |
Willian Galvani
|
5c00aa5921
|
AP_TemperatureSensor: Update TSYS01 for Pixhawk2
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
8550cf84e8
|
Plane: remove unused configuration options
|
2020-02-05 10:09:54 +11:00 |
Henry Wurzburg
|
46b84e72f0
|
Rover: add loiter gain and max vehicle speed params
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
35ea916adf
|
AP_Relay: change parameter name from relay to instance
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
47b9cb2e28
|
AP_Relay: tidy, reduce flash usage
|
2020-02-05 10:09:54 +11:00 |
Peter Hall
|
3a58aeb6c6
|
AR_WPNav: make get_stopping_location public
|
2020-02-05 10:09:54 +11:00 |
Peter Hall
|
5b4a6eaf52
|
Rover: use AR_WPNav get stopping location
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
df798860f6
|
waf: remove vestiges of waf-run coverage
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
78711f786d
|
Tools: autotest: remove vestiges of waf-run coverage
|
2020-02-05 10:09:54 +11:00 |
Henry Wurzburg
|
dffed8e008
|
AP_OSD: distance total fix for slow vehicles
|
2020-02-05 10:09:54 +11:00 |
Willian Galvani
|
61aaa17d2d
|
Sub: Create MOTOR_DETECT mode
This mode attempts to detect the direction of all motors and adjust parameters appropriately.
|
2020-02-05 10:09:54 +11:00 |
Willian Galvani
|
8ad195dd51
|
APMotors_6DOF: Implement motor_is_enabled(), get_motor_angular_factors() and set_reversed();
|
2020-02-05 10:09:54 +11:00 |
Peter Hall
|
1e02cbe009
|
AP_Windvane: caculate vehicles current tack
|
2020-02-05 10:09:54 +11:00 |
Peter Hall
|
90382a886f
|
Rover: Sailboat tacking improvements
|
2020-02-05 10:09:54 +11:00 |
Randy Mackay
|
1d21d1fde4
|
Rover: fix init of struct published to OSD
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
929fbc3bba
|
Tools: autotest: add two basic tests for radio failsafe
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
3b6f7219fc
|
Tools: autotest: add disarm_wait function
|
2020-02-05 10:09:54 +11:00 |
Willian Galvani
|
ae8df5678a
|
AP_Motors_6DOF: Add missing 'break'
|
2020-02-05 10:09:54 +11:00 |
Henry Wurzburg
|
fb0b92cc94
|
AP_OSD: scale xtrack, add precision for distances <10 units
|
2020-02-05 10:09:54 +11:00 |
Patrick José Pereira
|
6c734b5006
|
AP_HAL_Linux: PCA9685: Check for device before accessing it
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
|
2020-02-05 10:09:54 +11:00 |
Andy Piper
|
30c86eb768
|
Tools: support lldb debugging for sim_vehicle and autotest
|
2020-02-05 10:09:54 +11:00 |
mhefny
|
9d67a9423f
|
SITL: adding Tricopter model in Webots
|
2020-02-05 10:09:54 +11:00 |
Peter Barker
|
4d6e7f7099
|
Tools: autotest: enable EK3 for ride-along
This will have SITL cross more code, even if we don't actually use the
EK3 output
|
2020-02-05 10:09:54 +11:00 |
Randy Mackay
|
586b1f3c8c
|
GCS_MAVLink: allow proximity to send only upward facing distances
this removes the requirement that a horizontal proximity sensor be enabled
|
2020-02-05 10:09:54 +11:00 |
Henry Wurzburg
|
fb66b8b961
|
Rover: publish nav data to OSD
|
2020-02-05 10:09:54 +11:00 |
Henry Wurzburg
|
0f0ceb6499
|
AP_OSD: formatting fixes
|
2020-02-05 10:09:54 +11:00 |
bnsgeyer
|
694075768f
|
Copter: tradheli update conversion
|
2020-02-05 10:09:20 +11:00 |
bnsgeyer
|
5898986b0a
|
AP_Motor: tradheli align swash params btwn frames and fix metadata
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
fef085a1c8
|
Tools: autotest: allow tracker to be armed between tests
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
f48a601d84
|
Tools: autotest: tidy handling of armed-at-end-of-test handling
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
7fd52a12cf
|
Tools: autotest: remove switch position assumption from takeoff
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
5871cdad23
|
AP_Math: remove unit_mod concept from wrap functions
devcall decided it would be clearer to have non-shared implementation
for the _cd variants
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
5e9aaca8df
|
AP_NavEKF2: initialise Kfusion stack variable to fix compilation
This fixes the compilation, as previous patches have done.
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
ec991969c7
|
AP_HAL_ChibiOS: correct include of mavlink header for analog debug
|
2020-02-05 10:09:20 +11:00 |
Andrew Tridgell
|
c6dade50c5
|
Tools: added script for creating apj file from *.bin
useful when you have a binary firmware and want to be able to upload
it with uploader.py
|
2020-02-05 10:09:20 +11:00 |
liang
|
9c44ebaced
|
AP_Baro: LPS22H: correct formatting
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
58c69d0252
|
Tools: autotest: test for vehicle armed after test passes
postcondition of any test is that it leaves the vehicle disarmed
|
2020-02-05 10:09:20 +11:00 |
Andrew Tridgell
|
de12430977
|
AP_NavEKF2: fixed build with g++ 9.1
this is a false positive, but the cost of clearing this array is low,
and it saves a much more complex fix
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
36ac689838
|
travis: run unit tests
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
2f1bb8279f
|
Tools: add entry for running unit tests to build_ci.sh
|
2020-02-05 10:09:20 +11:00 |
Peter Barker
|
bc9d6815e7
|
gtest: reference commit adding override keywords / use updated gtest
|
2020-02-05 10:09:20 +11:00 |