Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
3,828 Commits 71 Branches 509 Tags 790 MiB
Commit Graph

1422 Commits

Author SHA1 Message Date
Andrew Tridgell 7aa6ba2c86 OpticalFlow: fixed line endings 
this library was a mixture of dos and unix line endings, which makes
for very messy editing
 2012-03-11 15:37:07 +11:00
Andrew Tridgell 3c145ab61c Compass: update the compass driver to use the new vector.rotate() method 2012-03-11 15:37:07 +11:00
Andrew Tridgell 24a9fe8827 Math: added a test suite for the new rotation methods 2012-03-11 15:37:07 +11:00
Andrew Tridgell 85c3c1d2ea Math: added vector3.rotate() and matrix3.rotation() methods 
these operate on a "enum Rotation" which defines a set of standard
rotations. These are much faster than our previous method, plus use
less memory
 2012-03-11 15:37:07 +11:00
Andrew Tridgell a30b03cd0a SITL: lower the noise and drift levels for general autotest usage 2012-03-10 10:34:34 +11:00
Andrew Tridgell 07e8360970 InertialSensor: fixed HIL build 2012-03-10 10:34:34 +11:00
Andrew Tridgell 6d06d9d070 MAVLink: bring the v1.0 MAVLink in sync with 0.9 2012-03-10 10:34:34 +11:00
Andrew Tridgell fed5426274 DCM: after some experimentation, raise the ki values a bit 
this tracks the max gyro drift more accurately
 2012-03-10 10:34:34 +11:00
Andrew Tridgell 89b4a9f4ed Quaternion: use gyro drift value from sensor driver 2012-03-10 10:34:34 +11:00
Andrew Tridgell fd74414884 Quaternion: go back to the full update_MARG() 
the separate drift controller is too erratic on yaw hold to be usable
at the moment
 2012-03-10 10:34:34 +11:00
Andrew Tridgell 1002bbcbfe SITL: cleanup the gyro drift calculations 
use units that are more easily understood
 2012-03-10 10:34:34 +11:00
Andrew Tridgell ad21913605 Quaternion: make the quaternion test more generic 
works with DCM too
 2012-03-10 10:34:33 +11:00
Andrew Tridgell a889135e78 Quaternion: update to get_gyro_drift() interface 2012-03-10 10:34:33 +11:00
Andrew Tridgell e0cc9c93a1 Quaternion: removed some unused variables 2012-03-10 10:34:33 +11:00
Andrew Tridgell b67b0afd10 DCM: separate out the omega_yaw_P from omega_P 
this cleans up the separation of drift rates and proportional
correction from yaw source and accelerometers, allow the yaw
to run at a different rate to the accel correction
 2012-03-10 10:34:33 +11:00
Andrew Tridgell f4b1dae7cf IMU: added get_gyro_drift_rate() interface 
this just calls down to the InertialSensor layer
 2012-03-10 10:34:33 +11:00
Andrew Tridgell f46fba54dc AP_InertialSensor: added a get_gyro_drift_rate() interface 
this returns the expected max drift rate for the particular type of
gyro being used
 2012-03-10 10:34:33 +11:00
Andrew Tridgell 9e07fa3af6 DCM: removed the limit on linear acceleration 
we get linear accelerations of more than 1g when turning corners
 2012-03-10 10:34:33 +11:00
Andrew Tridgell ab1aec0f77 Quaternion: minor tuning 2012-03-10 10:34:33 +11:00
Andrew Tridgell e470bf2354 DCM: minor tuning based on testing my quad 2012-03-10 10:34:33 +11:00
Andrew Tridgell 97faa47ba6 SITL: make the yaw match the APM conventions 2012-03-10 10:34:33 +11:00
Andrew Tridgell d1713bd2fb SITL: fixed the pwm output on startup 2012-03-10 10:34:33 +11:00
Andrew Tridgell 8b37790bd1 Quaternion: code cleanups and added comments 2012-03-10 10:34:32 +11:00
Andrew Tridgell f5e5ccff6a DCM: code cleanup and added more comments 2012-03-10 10:34:32 +11:00
Andrew Tridgell e2b2c9181e Quaternion: bumb up gyro drift limit to match DCM 2012-03-10 10:34:32 +11:00
Andrew Tridgell 2b6fae6e16 ADC: removed the ADC level accel smoothing 
the quaternion code does a better job of handling this noise than this
filter does
 2012-03-10 10:34:32 +11:00
Andrew Tridgell 8ad6b5f4d1 Quaternion: separate out drift correction from main updates 2012-03-10 10:34:32 +11:00
Andrew Tridgell ff4f7ccc65 InertionSensor: update for new Ch6() interface 2012-03-10 10:34:32 +11:00
Andrew Tridgell d1976449fd IMU: fixed a warning 2012-03-10 10:34:32 +11:00
Andrew Tridgell e9f35bfa7f GPS: expose last_fix_time 2012-03-10 10:34:32 +11:00
Andrew Tridgell 17daa2f31c Compass: change last_update to be in microseconds 2012-03-10 10:34:32 +11:00
Andrew Tridgell 404a4e4896 ADC: use floats for ADC averaging 
this costs almost nothing and improved accel/gyro calibration
 2012-03-10 10:34:32 +11:00
Andrew Tridgell 4c6afa36cb DCM: removed update_DCM_fast 
this combines the functionality of the 'fast' DCM with the normal one,
and also speeds up both the yaw drift correction and the matrix update
code
 2012-03-10 10:34:31 +11:00
Andrew Tridgell 2c279639a3 AP_IMU: fixed led flashing in gyro cal 
thanks Pat!
 2012-03-10 10:34:31 +11:00
Andrew Tridgell b39323bf1b AP_Math: expanded the math test suite 2012-03-10 10:34:31 +11:00
Andrew Tridgell a8fd31a5e1 AP_Math: added quaternion->matrix and earth frame routines 
this will be used for 3d acceleration
 2012-03-10 10:34:31 +11:00
Andrew Tridgell d3dc5bd751 AP_Math: better way of handling safe_sqrt() 
better to test the result, than predict it
 2012-03-10 10:34:31 +11:00
Andrew Tridgell b273df0725 SITL: avoid parent pid code on cygwin 
this causes problems on windows
 2012-03-10 10:34:31 +11:00
Andrew Tridgell e1ff9a641b SITL: prevent nested timer interrupts 2012-03-10 10:34:31 +11:00
Andrew Tridgell d11aab610d Quat: test patch for michael 2012-03-10 10:34:31 +11:00
Andrew Tridgell a954f68f27 Quaternion: added NaN paranoid checking 
this is for Michael to run
 2012-03-10 10:34:30 +11:00
Andrew Tridgell d24b055b66 Math: added comment on quaternion constructor 2012-03-10 10:34:30 +11:00
Andrew Tridgell 1f5095e722 Math: added is_inf() on vector3f 2012-03-10 10:34:30 +11:00
Andrew Tridgell 89a10c584d Quaternion: added more numerical safety in the quaternion code 
prevent infinities from creeping in and prevent large drift changes
 2012-03-10 10:34:30 +11:00
Andrew Tridgell f2e6714598 AP_Math: added quaternion helper functions and a test suite 2012-03-10 10:34:30 +11:00
Andrew Tridgell f71311fdc0 Quaternion: fix the gyro bias in centripetal and remove smoothing 
the centripetal code needs to take account of the current gyro
bias.

It turned out that the accel and gyro smoothing was causing
significant control lag, and we're better off just letting the
quaternion code handle it via its own smoothing parameters
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 76736792f8 SITL: disable interrupts during register updates 
this may prevent bogus mode channel reads
 2012-03-10 10:34:30 +11:00
Andrew Tridgell e445a455d0 Quaternion: use GPS to correct for linear acceleration 
this gives much better pitch estimates. We should do this with the
airspeed sensor if available.
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 1ea1b500a6 Quaternion: don't update if we have a very long deltat 
this can be caused by stopping the system in a debugger
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 8b73166605 Compass: fixed last_update time for HIL compass 2012-03-10 10:34:30 +11:00
Andrew Tridgell 2969e16f7d RC: disable interrupts when reading the RC registers 
this prevents getting bogus values which could cause a flight mode
change
 2012-03-10 10:34:30 +11:00
Andrew Tridgell efe2686b33 GPS: added an acceleration estimate to the GPS driver 
This uses the GPS ground speed to estimate acceleration
 2012-03-10 10:34:30 +11:00
Andrew Tridgell 02ae5358d5 GPS: fixed some stdint types 2012-03-10 10:34:29 +11:00
Andrew Tridgell 2f5a4cdc4a Quaternion: added in reporting of gyro drift and rp/yaw errors 2012-03-10 10:34:29 +11:00
Andrew Tridgell 934a05bbc6 fixed comment 2012-03-10 10:34:29 +11:00
Andrew Tridgell a60cf111c5 DCM: fixed an uninitialised variable warning 2012-03-10 10:34:29 +11:00
Andrew Tridgell 7d9c4094a2 Quaternion: tweak the quaternion gains a bit 2012-03-10 10:34:29 +11:00
Andrew Tridgell e33bb217bc AP_IMU: improved the gyro calibration code 
this should give a much more accurate result
 2012-03-10 10:34:29 +11:00
Andrew Tridgell de1cfc8e34 Quaternion: drop the gyro drift rates down 
this should allow us to cope with noise more readily
 2012-03-10 10:34:29 +11:00
Andrew Tridgell 2d6680f144 DCM: fixed bug in accel averaging 
sorry Randy!
 2012-03-10 10:34:29 +11:00
Andrew Tridgell 73594199c8 AP_Quaternion: fixed build on Arduino 1.0 2012-03-10 10:34:29 +11:00
Andrew Tridgell a85ba80246 AP_Quaternion: added DCM compatibility interfaces 
useful for getting the code going quickly
 2012-03-10 10:34:29 +11:00
Andrew Tridgell 626f8598ed AP_IMU: added new_data_available() interface 2012-03-10 10:34:29 +11:00
Andrew Tridgell a052aa8435 AP_InertialSensor: added new_data_available() interface 2012-03-10 10:34:28 +11:00
Andrew Tridgell 61d649e7ac AP_ADC: added new_data_available() interface 
returns true if more samples are available
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 4a277f9871 fixed deltat in quaternion 2012-03-10 10:34:28 +11:00
Andrew Tridgell 353f9e613f SITL: make SITL not depend on DCM 2012-03-10 10:34:28 +11:00
Andrew Tridgell fb23c617fa Quaternion: added an AP_Quaternion library 
this is for experimenting with the Madgwick quaternion system, to see
if it is more or less noise sensitive than DCM
 2012-03-10 10:34:28 +11:00
Andrew Tridgell a05eeab55e SITL: reduce the simulated compass offsets 
this was causing us problems in getting DCM right
 2012-03-10 10:34:28 +11:00
Andrew Tridgell d03b11092b SITL: separate out drift speed and drift level 2012-03-10 10:34:28 +11:00
Andrew Tridgell 71d3847bfc SITL: added a drift_level multiplier 
this makes it easier to experiment with different gyro drift levels
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 61ebcfe9fe DCM: fixed the averaging of accel values for update_DCM_fast() 
this should improve drift correction for ArduCopter
 2012-03-10 10:34:28 +11:00
Andrew Tridgell de32c3bc31 AP_Math: added a .zero() method to Vector3f 2012-03-10 10:34:28 +11:00
Andrew Tridgell a0e2e69431 SITL: fixed delay() to account for signal interrupions 
when a timer went off we stopped the delay() code
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 37ab76c9e6 DCM_Test: fixed example code to work with SITL 
this also fixes the compass setup
 2012-03-10 10:34:27 +11:00
Andrew Tridgell d2a969ee95 SITL: push noise level to 2.0 for DCM testing 2012-03-10 10:34:27 +11:00
Andrew Tridgell 79b8ddc236 DCM: added a small amount of accel smoothing to update_DCM_fast() 2012-03-10 10:34:27 +11:00
Andrew Tridgell 55413bfcc1 DCM: don't use the z accel sensor for drift correction 
the z accel is the noisest, and seems to do more harm than good. Using
just x and y is sufficient for drift correction by assuming the vector
length
 2012-03-10 10:34:27 +11:00
Andrew Tridgell a78b00513b DCM: added a small amount of gyro and accel smoothing 
possibly not needed, but convenient to be able to test with different
values
 2012-03-10 10:34:27 +11:00
Andrew Tridgell 82032b17a9 DCM: added reporting interfaces for DCM state 2012-03-10 10:34:27 +11:00
Andrew Tridgell ae6a94a933 SITL: added sitl_simstate_send() 
used to report simulator state in logs
 2012-03-10 10:34:27 +11:00
Andrew Tridgell d106e3a970 MAVLink: import new message types DCM, HWSTATUS and SIMSTATE 2012-03-10 10:34:27 +11:00
Andrew Tridgell 4e354a9731 DCM: got rid of _error_roll_pitch from object state 
this can be a local error variable in common with the yaw code. This
saves 12 bytes in the object.
 2012-03-10 10:34:27 +11:00
Jason Short 13e9608fb8 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00
Jason Short 34cf1e8fb3 Updated on Barometer - increased the Temp filtering and decreased the pressure filtering to and get less temp noise, faster response from pressure. I'm filtering the Climb rate differently now, so this higher pressure noise should not hurt the derivative calcs at all now. 2012-03-06 20:55:35 -08:00
rmackay9 6c1299fe7e AP_RC - removed unused library 2012-03-04 18:21:52 +09:00
Andrew Tridgell dd9065123c SITL: use the new noise model 
use the new noise model at a low level for master until we sort out
DCM noise handling
 2012-03-02 18:31:07 +11:00
Andrew Tridgell 63ea5dfb49 APM_RC: allow the fast RC speed to be passed as a parameter 
this will allow users to test different speeds
 2012-03-02 17:57:08 +11:00
Andrew Tridgell f1a389fe19 AP_Param: ensure we can't have duplicate keys in Parameters.h 
this is O(n^2), but only at startup, and takes less than 1ms to run.
It catches a very nasty coding error
 2012-03-02 15:48:28 +11:00
Andrew Tridgell 1476f044e6 I2C: added lockup_count() interface 
used for reporting I2C problems
 2012-03-02 15:48:27 +11:00
Andrew Tridgell c9031f1d36 SITL: implement cli()/sei() properly for desktop build 
this disables simulated hardware interrupts during critical sections
 2012-03-02 15:48:27 +11:00
Jason Short 59e1d43f60 Updated fastPWM to 490Hz 2012-02-29 22:17:38 -08:00
Pat Hickey 8fa559930f AP_Param: nested group recursion into next_group disableable by macro 
* c.f. 0251932c81fe7eb, e5515bb6ef82
 2012-02-29 19:48:43 -08:00
Pat Hickey 8b3d013294 AP_Param: One more nexted group recursion disableable by macro 
* c.f. e5515bb6ef82
 2012-02-29 18:48:54 -08:00
rmackay9 9832ac879e AP_Compass - fixed compile warning 2012-02-29 22:57:35 +09:00
rmackay9 0311b70004 AP_Baro - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:46:29 +09:00
rmackay9 64f9f1d92e AP_Compass - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:45:49 +09:00
rmackay9 7c1d1b45a7 AP_DCM - fixed small compiler warning to do with order of parameters in constructor 2012-02-29 22:45:26 +09:00
rmackay9 3cbd172ea9 RC_Channel - fixed small compiler warning 2012-02-29 22:44:29 +09:00
rmackay9 ced49f7d01 AP_ADC - removed small compiler warning 2012-02-29 22:43:46 +09:00