Michael Oborne
884b08f47f
APM Planner 1.1.27
...
fix heli setup screen
force update check on start
fix battery capacity
2012-01-23 07:13:01 +08:00
Jason Short
25529dec69
added loiter_d to allow users to configure alternate Loiter alg
2012-01-22 14:19:27 -08:00
Jason Short
74daadb252
Revert "test to switch loiter controls"
...
This reverts commit 92270371d038f246d535f0ace9fc19272c44291d.
2012-01-22 14:19:27 -08:00
Andrew Tridgell
9c1e257826
fixed example in PID library
2012-01-23 08:47:46 +11:00
Jason Short
6476ba22f2
test to switch loiter controls
2012-01-22 12:28:34 -08:00
Pat Hickey
dfece8e3ff
ArduPlane: Call APM_RC.enable_out for all channels in init_rc_out.
2012-01-22 12:03:11 -08:00
Pat Hickey
89e11afc09
ArduCopter: Call APM_RC.enable_out for camera channels in init_camera()
2012-01-22 12:03:11 -08:00
Pat Hickey
98a90d0352
ArduCopter: Call motors_output_enable at correct spot during init
2012-01-22 12:03:11 -08:00
Pat Hickey
04a3112f33
ArduCopter: Add implementation of motors_output_enable to each motors_ frame type
2012-01-22 12:03:11 -08:00
Pat Hickey
602d56304a
APM_RC: PWM outputs are disabled by default on init
2012-01-22 12:03:11 -08:00
Pat Hickey
276913a950
APM_RC enable_out and disable_out added to APM1 and APM2
...
* Outputs still enabled by default
2012-01-22 12:03:11 -08:00
Jason Short
dd1e08a7e0
Causes Aero_SIM to fail
2012-01-22 09:34:43 -08:00
Jason Short
1d9783652a
added Beta 4 tag
2012-01-21 22:15:23 -08:00
Jason Short
60e3508f7c
converted to cm
...
Signed-off-by: Jason Short <jasonshort@mac.com>
2012-01-21 22:14:08 -08:00
Jason Short
aace39e65c
Converted distance gains to CM
...
added loiter_d for rate control, equal to old Nav_P gain
2012-01-21 22:13:57 -08:00
Jason Short
fffa1af3b3
Fixed speed governor which was letting speed get to 0.
...
added Loiter_d to replace Nav_P for rate control
wp_distance calc now returns CM
2012-01-21 22:12:57 -08:00
Jason Short
f638a4b81d
recording nav_bearing rather than target bearing
...
recording x and y speed rather than Iterms for nav since they are always 0 now
2012-01-21 22:10:28 -08:00
Jason Short
2fa24e0557
added conversions of CM to M
2012-01-21 22:09:39 -08:00
Jason Short
7edd16e5fe
Added Loiter_D to replace Nav_P for better separation of loiter and navigation tuning.
...
Upped Nav_P defaults to 3 based on windy flight testing
Added minimum WP speed define of 1m/s
Upped loiter_I for better wind performance - was not seeing any overshoot in logs
Made Nav_I default of 0, since we are not using it in the code.
2012-01-21 22:09:13 -08:00
Jason Short
59d1f225d5
convert command into CM from M
...
Making Landing boost be one at minimum to trigger better navthrottle output
2012-01-21 22:06:35 -08:00
Jason Short
f3cc1121aa
better default for speed governer
2012-01-21 22:05:48 -08:00
Jason Short
5cc19bbe7c
slightly less filtering for less latency
2012-01-21 22:04:54 -08:00
Jason Short
9003b95499
Converted to cm for distance
2012-01-21 22:04:35 -08:00
Jason Short
8cb645f3c2
increasing the velocity near WP
2012-01-21 11:59:49 -08:00
Jason Short
1aa6d0ea08
limiting the pitch throttle compensation
2012-01-21 11:59:49 -08:00
Jason Short
ab5716c42d
Calc error for logs
2012-01-21 11:59:49 -08:00
Michael Oborne
d2db7cc7b2
APM Planner - aerosomrc quad hil mod
2012-01-21 17:12:00 +08:00
Jason Short
7c25253422
Enabled auto throttle hold
2012-01-20 22:52:31 -08:00
Jason Short
7fb641ab77
added note
2012-01-20 22:52:31 -08:00
Jason Short
fb72ecd4e4
formatting
2012-01-20 22:52:31 -08:00
Jason Short
127544b833
Added cast for comparison
2012-01-20 22:52:30 -08:00
Jason Short
42b1362bba
cleanup
2012-01-20 22:52:30 -08:00
Jason Short
5ac26a5500
error on comparison operator
2012-01-20 22:52:30 -08:00
Jason Short
5180592913
Added Auto_land_timeout to params
2012-01-20 22:52:30 -08:00
Jason Short
c190f83bb0
AutoLanding timeout for Mission Planner
2012-01-20 22:52:30 -08:00
Jason Short
a22596fb33
Max throttle output was to high
2012-01-20 22:52:30 -08:00
Jason Short
19053bb725
Updated Firmware version
2012-01-20 22:52:30 -08:00
Jason Short
f5fd3a0597
reset all I terms at Arming
2012-01-20 22:52:30 -08:00
Jason Short
287ffb5fb4
enabled Mavlink Land command
2012-01-20 22:52:30 -08:00
Jason Short
6784989e83
relocated reset_I term functions to central location
2012-01-20 22:52:30 -08:00
Jason Short
d2c78d2b75
Stab_D changes units with the new dampening controller updates
...
Stabilize roll is raised to .1 - Flies great, and avoids a slow oscillation that could be affecting loiter.
Loiter P lowered to 1.5 based on feedback
2012-01-20 22:52:30 -08:00
Jason Short
932869b686
renamed function
2012-01-20 22:52:30 -08:00
Jason Short
43365fe802
Verify land updates from JLN
...
Effectively a throttle control for landing that mimics a person lowering the throttle.
2012-01-20 22:52:29 -08:00
Jason Short
ed32ad30fd
Refined the D term for stabilize
...
moved all the rest_I terms from code into 1 central place
2012-01-20 22:52:29 -08:00
Jason Short
5141534ea9
B3
2012-01-20 22:52:29 -08:00
Jason Short
db6db1ab91
set dampening range from 0 - .08 from 0 to .6. The new dampening code has changed units.
...
added the ability to force nav_throttle so we don't get ground effects screwing up baro sensor.
Added more descriptive Rest_I functions
2012-01-20 22:52:29 -08:00
Jason Short
6e94b21d67
Altitude no longer resets when moving loiter WP
2012-01-20 22:52:29 -08:00
Jason Short
85f10589b2
slowed down slightly
2012-01-20 22:52:29 -08:00
Jason Short
017364fc5b
Lowered range to more sensible values
2012-01-20 22:52:29 -08:00
Jason Short
2831ff9148
Off by default
2012-01-20 22:52:29 -08:00