Commit Graph

53521 Commits

Author SHA1 Message Date
TunaLobster afaca4b5f6 AP_RCMapper: Remove APM 2.x reference in parameter description 2022-06-18 08:26:40 +09:00
Andrew Tridgell e9942f9a17 Plane: prepare for 4.2.2beta1 2022-06-17 14:09:09 +10:00
Andrew Tridgell 2e1af59057 AP_Rangefinder: fixed scaling on PWM driver and enable SCALING parameter
this fixes a bug introduced here:

  https://github.com/ArduPilot/ardupilot/pull/18829

and allows the scaling of PWM rangefinders to be adjusted
2022-06-17 08:21:44 +10:00
Andrew Tridgell 7e4fb803a2 AC_AttitudeControl: reduced default quadplane VTOL pos XY gains 2022-06-16 21:26:49 +10:00
Andrew Tridgell 42f553626e Plane: adjust down default quadplane gains
make it better for a typical quadplane, the defaults were more
suitable on smaller aircraft
2022-06-16 21:26:49 +10:00
Peter Barker 08ae4f050c autotest: fix race condition in button test
The subsequent test could end up arming the vehicle based on this left-over state.
2022-06-16 21:24:31 +10:00
Peter Barker 4a015bd479 autotest: fix race condition in mission-end-behaviour test 2022-06-16 21:24:31 +10:00
Peter Barker 57b0d7f235 autotest: change rover default speedup time to 100 2022-06-16 21:24:31 +10:00
Peter Barker b150c48b5c Tools: add --no-run-with-defaults option to test-build-options script 2022-06-16 17:20:06 +10:00
Peter Barker 7120d4f750 autotest: fix race condition in need-ekf-to-arm check
At extreme speedups we may not detect the reboot in the Python before the autopilot is ready to arm...
2022-06-16 14:53:21 +10:00
Shiv Tyagi c339b1d374 SIM_Precland: add option to set orientation of precland device in sitl 2022-06-16 12:43:55 +10:00
Joshua Henderson 13d1b8632b Copter: remove param docs for ACRO_RP_P and _YAW_RP 2022-06-16 09:09:55 +09:00
Peter Barker 39a0ecbb4b autotest: check rate is configured after we do the rate check
This is just to make sure that the autopilot isn't losing the configuration somehow.
2022-06-16 10:04:08 +10:00
Peter Barker 6fcdea67c3 autotest: tidy hover_and_check_matched_frequency method
- remove pointless elses
 - clarify why a test is failing in exception messages
 - move variable definitions closer to their use
2022-06-15 19:07:34 +10:00
Andrew Tridgell 5a36d7cf0a AP_Periph: fixed non-contiguous mask for ESC telem output
this fixes the case where a peripheral node has an ESCs that are not
starting at the first channel. Reported here:

https://discuss.ardupilot.org/t/using-matekl431-adapters-for-pwm-and-dshot/85781/22

tested on MatekL431-Periph
2022-06-15 18:16:22 +10:00
Randy Mackay e55fa6ad92 Tools: add build_options for individual mount drivers 2022-06-15 18:08:58 +10:00
Randy Mackay 1400eba400 AP_Mount: minor include and definition re-order and fixup 2022-06-15 18:08:58 +10:00
Randy Mackay d24d3c0af8 AP_Mount: add HAL_MOUNT_STORMSERIAL_ENABLED build option 2022-06-15 18:08:58 +10:00
Randy Mackay 59916d0327 AP_Mount: add HAL_MOUNT_STORM32MAVLINK_ENABLED build option 2022-06-15 18:08:58 +10:00
Randy Mackay 4f0ee1276b AP_Mount: add HAL_MOUNT_SERVO_ENABLED build option 2022-06-15 18:08:58 +10:00
Randy Mackay e2106e63bf AP_Mount: add HAL_MOUNT_ALEXMOS_ENABLED build option 2022-06-15 18:08:58 +10:00
Randy Mackay 8f51e28242 AP_RobotisServo: disable with minmimize features and 1mb flash 2022-06-15 18:05:44 +10:00
Randy Mackay 91d33c885e AP_Volz: disable with minmimize features 2022-06-15 18:05:44 +10:00
Andrew Tridgell 06a9a1521c AP_GPS: added GPS_DRV_OPTIONS bit for ellipsoid height 2022-06-15 17:30:28 +10:00
Andrew Tridgell 509f03f946 AP_GPS: cleanup driver option access
use option_set() to make code clearer
2022-06-15 17:30:28 +10:00
Andrew Tridgell 8f3405d308 hwdef: added Pixhawk6X support
a new H753 based board similar to the Pixhawk5X
2022-06-15 17:28:40 +10:00
Andrew Tridgell 9efcad3adf HAL_ChibiOS: added support for ALT_RAM_MAP on H7
for compatibility with the px4 H7 bootloader
2022-06-15 17:28:40 +10:00
Andrew Tridgell 308717d5eb HAL_ChibiOS: enable ITCM and DTCM on H7 at startup
these may have been disabled by the px4 H7 bootloader
2022-06-15 17:28:40 +10:00
Andrew Tridgell 7e4da1ef85 Tools: added Pixhawk6X bootloader 2022-06-15 17:28:40 +10:00
Andy Piper 25785e12d9 AP_RCTelemetry: don't spam mode changes on CRSF startup
rewrite device ping bootstrap to avoid ping flood
enable device pings on CRSF in the event of TX loss.
only send pings if not negotiating the version
2022-06-15 17:20:36 +10:00
Andy Piper 9b8ea8475d AP_RCProtocol: reset UART on RX failure for CRSF
update CRSF timestamps to use microseconds
implement RX liveness protocol and implement for CRSF
2022-06-15 17:20:36 +10:00
Andy Piper f828c690e7 bootloaders: add MambaF405-2022 bootloaders 2022-06-15 17:05:41 +10:00
Andy Piper 3db079d15c Tools: add MambaF405 2022 MK4 2022-06-15 17:05:41 +10:00
Andy Piper ed6f7fb9e9 AP_HAL_ChibiOS: add support for MambaF405 2022 MK4
mark DMA on MambaF405US-I2C UARTs
correct RSSI pin on MambaF405US-I2C
2022-06-15 17:05:41 +10:00
Randy Mackay 34f327404a AP_Mount: Gremsy only enabled on >1MB boards 2022-06-15 09:07:14 +09:00
Randy Mackay 1fca72a831 GCS_MAVLink: add comment re sending locations to mounts 2022-06-15 09:07:14 +09:00
Randy Mackay e595da41e6 AP_Mount: gremsy uses gimb-dev-att-send to retract gimbal
this replaces the MAV_CMD_USER_1 method
2022-06-15 09:07:14 +09:00
Randy Mackay 14c81099db AP_Mount: add Gremsy driver
Co-authored-by: bugobliterator <siddharthbharatpurohit@gmail.com>

this drivers special features include
sends ATTITUDE and AUTOPILOT_STATE_FOR_GIMBAL
support of RC rate targets
captures and re-forwards gimbal_device_attitude_status
2022-06-15 09:07:14 +09:00
Randy Mackay 6723a0fc55 AP_Mount: handle gimbal_device_attitude_status 2022-06-15 09:07:14 +09:00
Randy Mackay 247697ccc4 AP_Mount: add support for DO_GIMBAL_MANAGER_PITCHYAW mavlink command 2022-06-15 09:07:14 +09:00
Randy Mackay 8092697c1a AP_Mount: backend record RC rate targets 2022-06-15 09:07:14 +09:00
Randy Mackay f157e5a073 AP_Mount: add set_yaw_lock 2022-06-15 09:07:14 +09:00
Randy Mackay 589102b7d7 AP_Mission: add DO_GIMBAL_MANAGER_PITCHYAW support 2022-06-15 09:07:14 +09:00
Randy Mackay 640a4b1a5f RC_Channel: add mount lock aux function 2022-06-15 09:07:14 +09:00
Randy Mackay f83b4cdb40 GCS_MAVLink: support sending AUTOPILOT_STATE_FOR_GIMBAL_DEVICE 2022-06-15 09:07:14 +09:00
bugobliterator 4dd66fed4b GCS_MAVLink: forward gimbal-device-information to AP_Mount
Co-authored-by: Randy Mackay <rmackay9@yahoo.com>

also forward gimbal_device_attitude_status
2022-06-15 09:07:14 +09:00
Randy Mackay 7d13582913 Copter: implement get_rate_bf_targets method 2022-06-15 09:07:14 +09:00
Randy Mackay cd1a62b7bc Copter: move get_wp_xxx declarations higher in Copter.h
The declarations are grouped by the file in which they appear except for these 3
2022-06-15 09:07:14 +09:00
Randy Mackay c19d5391d9 AP_Vehicle: add get_rate_bf_targets method 2022-06-15 09:07:14 +09:00
Randy Mackay 0975da6068 AP_Mount: remove virtual distructor from backend 2022-06-15 09:07:14 +09:00