Commit Graph

574 Commits

Author SHA1 Message Date
Andrew Tridgell 1871c6bef7 HAL_SITL: use motor mask for noise checking for motors 2022-10-16 20:38:19 +11:00
Peter Barker 0d5d9c04f0 AP_HAL_SITL: SITL SerialDevice optionally checks baudrates match 2022-09-28 20:53:34 +10:00
Yuri 20f0fd0589 AP_HAL_SITL: increase short board names to 23 chars 2022-09-21 17:56:42 +10:00
murata 64c60c8149 AP_HAL_SITL: Accurate 10 counts 2022-09-16 08:53:16 +10:00
Peter Barker fb3a7d0d10 AP_HAL_SITL: do not return from reboot command
This structure was set up to mimic the should_exit code originally from the Linux HAL.  It runs contrary to the intent of the HAL reboot call, which is not expected to return.  This oddity leads us to emit wo acks sequentially, one success, one failure, which is just weird.
2022-09-14 21:23:18 +10:00
Andrew Tridgell 53997a284b AP_HAL_SITL: fixes from --ubsan autotest 2022-09-06 10:49:50 +10:00
Jeffrey Laut 3133aff352 SITL: fix simulated RC failure while receiving RC overrides 2022-09-02 12:08:34 +10:00
Peter Barker 1c7e2f5094 AP_HAL_SITL: correct bind-value SIM_RC_FAIL handling
If SITL is not receiving any sitl rc input (so _sitl_rc_in.recv(...) is allways returns -1 then the bind-values code would never be crossed so the RC input values would remain at their initialisation values rather than honouring the SIM_RC_FAIL setting which says they should go to bind values (notably throttle-to-950)
2022-08-10 17:14:21 +10:00
Henry Wurzburg e682296b58 AP_HAL_SITL: add TeraRange Neo Rangefinder 2022-08-09 09:01:34 +10:00
bugobliterator 8e81ee0292 AP_HAL_SITL: add support for starting node in maintenance mode 2022-07-27 18:18:03 +10:00
Andrew Tridgell 9b0c8674d6 HAL_SITL: catch ubsan errors into a log file 2022-07-12 11:00:08 +10:00
Andrew Tridgell f55aadfedf HAL_SITL: fixed undefined behaviour in GPIO 2022-07-12 11:00:08 +10:00
Andy Piper 061ddf7a3f AP_HAL_SITL: save a sliding window of frequency bins 2022-06-01 15:49:32 +01:00
Iampete1 031115577a AP_HAL_SITL: enable 32 servo outs 2022-05-22 12:07:37 +10:00
Clyde McQueen 25fd69b947 AP_HAL_SITL: init ArduSub pwm_output to [1500, ...]
Signed-off-by: Clyde McQueen <clyde@mcqueen.net>
2022-05-19 07:53:52 +10:00
Andrew Tridgell 7dc5da1247 HAL_SITL: cleanup SITL airspeed handling
fixed handling of EAS2TAS, and fixed ratio per sensor.

Removed the wind delay code (which was never being used). We should
add a generic delay filter if we need this again
2022-05-17 19:34:32 +10:00
Andrew Tridgell a6cd7ffd20 HAL_SITL: fixed warning 2022-05-06 06:55:16 +10:00
Andy Piper 3199412bff AP_HAL_SITL: add vector addition function 2022-05-04 17:05:51 +10:00
Andy Piper 63229d7eca AP_HAL_SITL: correct disable channel maths
unilaterally write rcoutput to appease the sitl gods
2022-03-29 10:29:31 +11:00
Andrew Tridgell f8aa4623ef HAL_SITL: don't use terrain adjustment 2022-03-28 16:01:21 +11:00
bugobliterator bd2bf7fedc AP_HAL_SITL: add support for CANFD in SITL 2022-03-27 06:07:34 -07:00
Andrew Tridgell 535d7f0d85 AP_HAL_SITL: removed terrain home correction 2022-03-10 07:34:20 +11:00
Andrew Tridgell 5eb8b8d72e HAL_SITL: support mavcan message forwarding 2022-02-12 16:36:05 +11:00
Andrew Tridgell 9fd25907e2 HAL_SITL: fixed mapping of --serial ports in SITL
uart paths are still in uartABCD order
2022-01-21 10:07:55 +11:00
Peter Barker ee341bc4eb SITL: add compilation option AP_SIM_CRSF_ENABLED 2022-01-15 21:56:33 +11:00
Peter Barker 08b8d3ad34 AP_HAL_SITL: correct compilation when SIM options disabled
AP_HAL_SITL: use AP_ASIM_GIMBAL_ENABLED

AP_HAL_SITL: use AP_SIM_ADSB_ENABLED

AP_HAL_SITL: use AP_SIM_RPLIDARA2_ENABLED

AP_HAL_SITL: use AP_SIM_PS_LIGHTWARE_SF45B_ENABLED

AP_HAL_SITL: use AP_SIM_PS_TERRARANGERTOWER_ENABLED

AP_HAL_SITL: use AP_SIM_AIS_ENABLED

AP_HAL_SITL: use AP_SIM_JSON_MASTER_ENABLED
2022-01-15 17:37:24 +11:00
Pierre Kancir 6584fef711 AP_HAL_SITL: catch more signal for correct exit
SIGINT is for ctrl-c
SIGHUP and SIGQUIT are use within term. If the term close before SITL, it will trigger one of those and then exit cleanly anyway
2022-01-12 12:31:56 +11:00
Shiv Tyagi af950e266b AP_HAL_SITL: add dataflash to spi device table
We simulate jedec flash for logging. Hence, we need to add dataflash to device table. Also, we need to remove HAL_LOGGING_SITL_ENABLED since we no longer need it

Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Andy Piper fa91e74fde AP_HAL_SITL: remove redundant harmonics from DSP 2021-12-22 18:13:38 +11:00
Peter Barker fbe46f400f AP_HAL_SITL: stop passing home_str to _sitl_setup
This is poked into the model now
2021-12-13 09:30:33 +11:00
Peter Barker 2f77fef10e AP_HAL_SITL: permit float-equal while we do comparison vs INFINITY 2021-12-13 08:38:17 +11:00
Peter Barker acbe567202 AP_HAL_SITL: consolidate rangefinder range calculations 2021-12-11 20:10:10 +11:00
Peter Barker 6e8c7c6b03 AP_HAL_SITL: remove unused mag-data delay buffer state variables
This delay buffer code is now in AP_Compass_SITL
2021-12-07 16:41:11 +11:00
Peter Barker cce14d8461 AP_HAL_SITL: remove unused _home_str member 2021-12-07 09:36:22 +11:00
Peter Barker 8cc7f51de1 AP_HAL_SITL: tidy set/get of hw RTC 2021-12-06 12:58:43 +11:00
Peter Barker 11cbd68296 AP_HAL_SITL: remove incorrect use of ARRAY_SIZE
This was converted to a linked list....
2021-11-24 18:26:17 +11:00
Peter Barker cdccc67fb8 AP_HAL_SITL: make SITL::ADSB a SITL::SerialDevice 2021-11-23 11:09:29 +11:00
Andrew Tridgell 3b3abdeef0 AP_HAL_SITL: support up to 9 UARTs 2021-11-22 22:48:59 +11:00
Peter Barker eb6da9512f AP_HAL_SITL: quieten i2c-device-creation diagnostics 2021-11-12 10:17:28 +11:00
bugobliterator 09096cb355 AP_HAL_SITL: add get_storage_ptr method 2021-11-10 17:21:35 +11:00
Peter Barker 9ebd0cdeed AP_HAL_SITL: use SITL::SerialDevice in place of pipe for communication 2021-11-06 16:54:07 +11:00
Peter Barker 02dc42275c AP_HAL_SITL: remove unused/unimplemented methods/vars, tidy namespacing 2021-10-28 09:09:44 +11:00
Andrew Tridgell 8192661042 AP_HAL_SITL: rename uLanding simulation to USD1 2021-10-26 15:31:12 +11:00
Peter Barker cf9bbb570c AP_HAL_SITL: correct nullptr check on simulated mavlink rangefinder
Obvious copy/paste error
2021-10-22 21:46:01 +11:00
Peter Barker 1ab8a3e3aa AP_HAL_SITL: make simulated GPS work as a SerialDevice 2021-10-21 12:09:21 +11:00
Peter Barker 99e80549b1 SITL: move sitl_gps.cpp to SIM_GPS.cpp 2021-10-21 12:09:21 +11:00
Stephen Dade 1356beb14d AP_HAL_SITL: Add instance to ADSB simulation 2021-10-20 20:21:33 +11:00
Peter Barker 21030c4e83 AP_HAL_SITL: remove written-only AP::sitl().update_rate_hz 2021-10-20 19:07:17 +11:00
Peter Barker 8c9ade3f7f AP_HAL_SITL: move simulated megasquirt to SerialDevice framework 2021-10-17 10:00:08 +11:00
Asa Davis 85fbbe0704 SITL: add simulator for LORD Microstrain serial EAHRS 2021-10-17 08:55:03 +11:00