Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
31,080 Commits 71 Branches 509 Tags 789 MiB
Commit Graph

137 Commits

Author SHA1 Message Date
Andrew Tridgell f7ec2618a3 AP_BoardConfig: added SP01 board type 2018-02-14 18:27:00 +11:00
Tom Pittenger 3105fd56bc AP_BoardConfig: add param defaults for EMLID_EDGE for CAN_DRIVER=1 2018-02-13 15:29:53 +11:00
Andrew Tridgell 682dcb65cf AP_BoardConfig: added param helper for HAL parameters 
only for HAL_REVOMINI for now
 2018-02-10 09:14:41 +11:00
Andrew Tridgell abd659212e AP_BoardConfig: fixed device semaphore in board detect 
thanks to Mark for finding this
 2018-02-09 10:14:46 +11:00
Andrew Tridgell 3afaf81ccc AP_BoardConfig: added param object for AP_Radio 2018-02-08 17:36:33 +11:00
Siddharth Purohit a413fef77f AP_BoardConfig: add support for UAVCAN setup on ChibiOS boards 2018-02-07 20:33:45 +11:00
LukeMike ccb316f3f3 VRBRAIN / AP_BoardConfig: some update for new VR Brain 5.2E (EEPROM version) 2018-02-05 08:26:49 +11:00
LukeMike 505497b555 VRBRAIN / AP_BoardConfig: added fmu_mode parameter for VR Brain boards 2018-02-05 08:26:49 +11:00
LukeMike b7985f77b5 VRBRAIN / AP_BoardConfig: added VR Brain boards into board_setup_drivers and board_autodetect 2018-02-05 08:26:49 +11:00
LukeMike 6b820ac9e4 VRBRAIN / AP_BoardConfig: added VR Brain define into px4_board_type enum 2018-02-05 08:26:49 +11:00
Andrew Tridgell f8a3b0e753 AP_BoardConfig: improved board config 
use hwdef.dat to enable RTSCTS and SBUS_OUT
 2018-01-20 17:40:07 +11:00
Nikita Tomilov 1549b1a52a AP_BoardConfig: CAN: Merge PX4 and Linux CAN setup 
Here we merge PX4 and Linux CAN bus setup since the interface is almost
the same for both of them.
 2018-01-17 07:24:17 -08:00
Nikita Tomilov 43bfcbc8e2 AP_HAL_Linux: CAN: Rename CANDriver -> CANManager 2018-01-17 07:24:17 -08:00
Nikita Tomilov d0fc481202 AP_HAL_Linux: CAN: Rename Linux::LinuxCAN -> Linux::CAN 2018-01-17 07:24:17 -08:00
Alexey Bulatov 606eb05c95 AP_BoardConfig: Linux CAN initialisation 2018-01-17 07:24:17 -08:00
Andrew Tridgell ff87d27143 AP_BoardConfig: fixed return of get_pwm_count() 
thanks to Michael for noticing
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 5458377e67 AP_BoardConfig: support MindPX-v2 2018-01-15 11:46:02 +11:00
Andrew Tridgell 02c3bea5a5 AP_BoardConfig: support ChibiOS FMUv4 2018-01-15 11:46:02 +11:00
Andrew Tridgell 82cc36d6d0 AP_BoardConfig: called board_setup() even without autodetect 
we need to init hal.rcou and hal.gpio
 2018-01-15 11:46:02 +11:00
Andrew Tridgell b1ebbd1a1c AP_BoardConfig: enable auto-detect only on FMUv3 
F412 should not do board detection
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 60b1eab06d AP_BoardConfig: added get_pwm_count() 2018-01-15 11:46:02 +11:00
Andrew Tridgell e88fe93688 AP_BoardConfig: init chibios IO after boardconfig 
this allows for the init to use parameters such as BRD_IO_ENABLE from
AP_BoardConfig
 2018-01-15 11:46:02 +11:00
Andrew Tridgell 7cb1c0420a AP_BoardConfig: include BRD_IO_ENABLE on ChibiOS 2018-01-15 11:46:02 +11:00
Andrew Tridgell 13f4780815 AP_BoardConfig: make a singleton 
allows for io_enabled() static function
 2018-01-15 11:46:02 +11:00
Andrew Tridgell accac344f2 AP_BoardConfig: support ChibiOS as well as NuttX 
allow for board detection with ChibiOS
 2018-01-15 11:46:02 +11:00
Andrew Tridgell a4d2d79ce7 AP_BoardConfig: removed create() method for objects 
See discussion here:

  https://github.com/ArduPilot/ardupilot/issues/7331

we were getting some uninitialised variables. While it only showed up in
AP_SbusOut, it means we can't be sure it won't happen on other objects,
so safest to remove the approach

Thanks to assistance from Lucas, Peter and Francisco
 2017-12-14 08:12:28 +11:00
Mark Whitehorn 560402bad4 AP_BoardConfig: clarify PX4IO SBUS enable message 2017-11-30 10:20:04 +11:00
DOMINATOR\Eugene 4c6f954cdf AP_BoardConfig: separation of parameter groups 2017-11-15 09:52:43 +11:00
proficnc 6a94d285de AP_BoardConfig: fixed description to warn against 
setting the wrong heater value in params
 2017-11-07 12:00:32 +11:00
Lucas De Marchi ef3edc531c AP_BoardConfig: add static create method 2017-09-26 03:01:21 +01:00
Peter Barker b8d3d180d1 AP_BoardConfig: clarify board type 2 also to be used on the Cube autopilot 2017-09-08 18:02:34 +01:00
Kevin Lopez Alvarez a5a5bd3a95 AP_BoardConfig: Remove comments and use correct board number 2017-07-24 13:47:06 +10:00
Kevin Lopez Alvarez a51bf8c918 AP_BoardConfig: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Andrew Tridgell 401a6f5373 AP_BoardConfig: fixed FMUv1 IO update 
when doing an IO firmware update uartC is used to talk to the IO
bootloader. We need to close uartC to prevent corruption of the
bootloader protocol. The uart is automatically re-opened when it is
needed
 2017-07-22 16:25:17 +10:00
Peter Barker 4312d1a500 AP_BoardConfig: eliminate GCS_MAVLINK::send_statustext_all 2017-07-11 23:53:53 +01:00
Andrew Tridgell dd7c96a6cc AP_Radio: reseve an ID for AP_Radio 
as discussed with Randy
 2017-07-10 17:07:36 +10:00
Eugene Shamaev 43e9c8370f AP_BoardConfig: increase start delay to 5 seconds 2017-07-03 11:44:32 +01:00
Eugene Shamaev a7921a273b AP_BoardConfig: move of CAN parameters into separate group and support of several interfaces 2017-07-03 11:44:32 +01:00
Peter Barker 5c15c1e4d2 AP_BoardConfig: add public method returning true if on sensor error 2017-06-07 12:56:46 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas f7a683d38e AP_BoardConfig: remove redundant BRD_ prefix, it also made this parameter 17 characters long 2017-05-30 12:09:02 +09:00
Andrew Tridgell a3cb6a42c9 AP_BoardConfig: drop target temperature for cube to 45 
getting to 60 was taking far too long (15 minutes or so). 45 is more
achievable.

This is a result of the fix to the invensense temperature detection
code
 2017-05-24 08:41:16 +10:00
Andrew Tridgell 9e74bfbc20 AP_BoardConfig: cope with bad config of pixhawk2 
don't allow FMUv2 firmware on cube, and force temperature if incorrect
 2017-05-24 08:41:16 +10:00
Dr.-Ing. Amilcar Do Carmo Lucas a85b7af32d AP_BoardConfig: Use SI units conventions in parameter units 
Follow the rules from:
http://physics.nist.gov/cuu/Units/units.html
http://physics.nist.gov/cuu/Units/outside.html
and
http://physics.nist.gov/cuu/Units/checklist.html
one further constrain is that only printable (7bit) ASCII characters are allowed
 2017-05-17 18:07:25 +10:00
Andrew Tridgell e32e2f5b5d AP_BoardConfig: added sensor_config_error() 
used to notify user of fatal sensor setup error
 2017-05-03 11:37:01 +10:00
Andrew Tridgell 4c36c77db1 AP_BoardConfig: split setup of safety switch init init_safety() 
this allows it to be called late, so that servo outputs are fully
setup before the safety is disabled when BRD_SAFETYENABLE=0
 2017-04-30 21:47:04 +10:00
Eugene Shamaev 67a6e651d6 AP_BoardConfig: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Lucas De Marchi 1adf247a60 AP_BoardConfig: fix board type number for aerofc 
Types 7-12 are being used by vrbrain boards. Even if they are inside
another ifdef, they can't be the same because it's used by the BRD_TYPE
parameter.  Use 13 for aerofc since it was already the one being used in
the parameter description.

Thanks to Michael du Breuil for noticing it.
 2017-04-12 11:46:55 -07:00
Eugene Shamaev 0b54d5764c AP_BoardConfig: support for CAN and UAVCAN at board level 2017-04-10 22:38:13 +01:00
Andrew Tridgell bcec837f06 AP_BoardConfig: fixed warning in SITL build 2017-04-10 10:02:42 +10:00
Andrew Tridgell c118deccb0 AP_BoardConfig: added BRD_IO_ENABLE parameter 
allow for px4io to be disabled completely
 2017-04-05 20:14:53 +10:00