bugobliterator
f298ea406e
HAL_ChibiOS: enable RNG only for H7 based boards off for the rest by default
2021-10-07 19:43:11 +11:00
bugobliterator
fc4d59c5a4
HAL_ChibiOS: setup hw random number generator for stm32 chips
2021-10-07 19:43:11 +11:00
bugobliterator
792e6666a3
HAL_ChibiOS: add random number generator implementation for ChibiOS
2021-10-07 19:43:11 +11:00
Iampete1
9751cb5b24
AP_HAL_ChibiOS: move is_dshot_protocol up to AP_HAL
2021-10-06 18:59:57 +11:00
Iampete1
f7cba024c1
AP_HAL_ChibiOS: AnalogSource: check for valid pin
2021-10-06 18:42:51 +11:00
Andrew Tridgell
33529c98a9
HAL_ChibiOS: check the ROMFS line for IOMCU is added
2021-10-06 06:45:43 +11:00
Andrew Tridgell
52124cf602
HAL_ChibiOS: fixed f1 bootloader build errors
2021-10-06 06:44:36 +11:00
Andrew Tridgell
8deaa1b46b
HAL_ChibiOS: fixed warning for USB
2021-10-06 06:44:36 +11:00
Andrew Tridgell
4daf4ad501
HAL_ChibiOS: lock in no warnings for chibios RTOS build
2021-10-06 06:44:36 +11:00
Andrew Tridgell
4dbff85de7
HAL_ChibiOS: check for common hwdef.dat errors
...
catches missing GPIO type, mismatched timers and UARTs or bad pin types
2021-10-05 15:46:02 +11:00
Iampete1
f0a284c1e7
AP_Hal_ChibiOS: R9Pilot: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
0143518954
AP_Hal_ChibiOS: mRoControlZeroF7: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
a282a39866
AP_Hal_ChibiOS: F4BY: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
6f1f26a72a
AP_Hal_ChibiOS: CubeOrange: add OUTPUT to GPIO
2021-10-05 15:46:02 +11:00
Iampete1
5848510876
AP_HAL_ChibiOS: set flow control disabled if no RTS line
2021-10-05 12:11:47 +11:00
Michel Pastor
a9fed2f9bc
RCOutput: fix full throttle bug
2021-10-05 11:47:04 +11:00
Andrew Tridgell
c15221fd53
HAL_ChibiOS: fixed orientation of ICM42605 on QiotekZealotF427
2021-10-03 14:00:09 +11:00
Andrew Tridgell
6953778b4c
HAL_ChibiOS: use micros16() for blheli pass-thru IRQ
...
saves some IRQ overhead, makes time handling more consistent
2021-10-02 18:26:39 +10:00
Andrew Tridgell
5714ee113f
HAL_ChibiOS: added micros16() method
2021-10-02 18:26:39 +10:00
Andrew Tridgell
2aef3364bc
HAL_ChibiOS: optimisation for AP_HAL::micros() on systems with 32 bit timers
...
most ChibiOS boards have a 32 bit timer. This optimisation reduces the
cost of micros() from 0.3us to 0.06us, which is significant in
interrupt handlers and for accurate timing. It takes advantage of the
timer being 32 bit with 1MHz clock
2021-10-02 18:26:39 +10:00
bugobliterator
dd9f513aa5
AP_HAL_ChibiOS: setup led control via lua script for HerePro
2021-09-30 08:52:27 +10:00
Iampete1
b6de44cc7b
AP_HAL_ChibiOS: CubeOrange: add alt config for telem1 RTS CTS as GPIO
2021-09-29 19:55:21 +10:00
Iampete1
8ae5bc5ad0
AP_HAL_ChibiOS: hwdef: allow GPIO alt config
2021-09-29 19:55:21 +10:00
Iampete1
a96150a528
AP_HAL_ChibiOS: allow enabling GPIO as alt config
2021-09-29 19:55:21 +10:00
Iampete1
dc45a113f9
AP_HAL_ChibiOS:UARTDriver: allow re-defintion of RTS and CTS pins
2021-09-29 19:55:21 +10:00
Andrew Tridgell
e85594e423
HAL_ChibiOS: added KakuteH7 support
2021-09-29 18:11:04 +10:00
Andrew Tridgell
d1d5cd5d9f
HAL_ChibiOS: fix sdcard on SPI bus on H7
...
the spiIgnore() call was hanging on H7. The ChibiOS submodule change
fixes that, but this patch is also needed to ensure we timeout any
spiIgnore calls correctly
2021-09-29 18:11:04 +10:00
Andrew Tridgell
2c2c85c4d8
HAL_ChibiOS: fixed polled SPI
2021-09-29 18:11:04 +10:00
Andrew Tridgell
27e93155f4
HAL_ChibiOS: fixed build on boards with OTG2 and no CAN interfaces
2021-09-29 18:11:04 +10:00
Iampete1
ade01f41d9
AP_HAL_ChibiOS: support digital write via IOMCU
2021-09-28 09:40:25 +10:00
Andrew Tridgell
4aa88d172c
HAL_ChibiOS: adjust Swan-K1 parameters
...
limit down pitch to 15 degrees to prevent overspeed, and limit angular
rates to 100 deg/s
2021-09-27 21:21:53 +10:00
Peter Barker
43469955a9
AP_HAL_ChibiOS: rename GENERATOR_ENABLED to HAL_GENERATOR_ENABLED
2021-09-26 19:24:09 +10:00
Josh Henderson
27fa2e776d
AP_HAL_ChibiOS: Hitec-Airspeed move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-24 21:05:05 +10:00
Andrew Tridgell
6d093e56fb
HAL_ChibiOS: added Nucleo-L496 AP_Periph target
2021-09-24 18:08:00 +10:00
Andrew Tridgell
0212e23cd3
HAL_ChibiOS: added support for STM32L496 MCUs
...
good MCU for AP_Periph
2021-09-24 18:08:00 +10:00
Peter Barker
1bd62362a4
AP_HAL_ChibiOS: move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-22 21:37:00 +10:00
Andrew Tridgell
758ce2699e
HAL_ChibiOS: added Hitec-Airspeed hwdef
2021-09-21 13:51:40 +10:00
Andrew Tridgell
7f59366cc0
HAL_ChibiOS: process AIRSPEED lines in hwdef.dat
2021-09-21 13:51:40 +10:00
Iampete1
bf695e4eeb
AP_HAL_ChibiOS: atof to strtof
2021-09-15 17:36:12 +10:00
Hwurzburg
6dfbd9ce31
AP_HAL_ChibiOS: add batt mon defaults to Kakutef4 Mini
2021-09-14 10:14:20 +10:00
Iampete1
53ee7d861d
AP_HAL_ChibiOS: remove safe PWM
2021-09-14 09:23:02 +10:00
Andrew Tridgell
88d77d0acd
HAL_ChibiOS: change f303-PWM timers
...
fixes PWM on channels 3 and 4
2021-09-13 21:29:13 +10:00
Andrew Tridgell
adbaccaa08
HAL_ChibiOS: fixed RTSCTS flow control issue
...
this fixes an issue reported on MatekH743, but also applies to other
boards. When not using DMA if there have been bytes written before the
auto flow control detection was enabled then these must be cleared
from _total_written so the flow control detection can work correctly
2021-09-13 21:28:08 +10:00
mateksys
659286ee4f
ChibiOS: add icm42605 as substitution for icm20602
2021-09-11 17:37:12 +10:00
Iampete1
529a3a9122
AP_HAL_ChibiOS: convert back to full range on IOMCU ONESHOT125 read
2021-09-08 18:01:50 +10:00
Andy Piper
e705f78b5e
AP_HAL_ChibiOS: correct and compact Pixhawk4-bdshot build
2021-09-08 17:09:49 +10:00
Andy Piper
c92c75c9a6
AP_HAL_ChibiOS: bdshot version of CUAVv5
2021-09-08 17:09:49 +10:00
Andy Piper
bb41db8478
AP_HAL_ChibiOS: bdshot version of CUAVv5Nano
2021-09-08 17:09:49 +10:00
Andrew Tridgell
d29057a158
HAL_ChibiOS: added f303-PWM
...
for a PWM output node based on mRo f303 CAN node
2021-09-08 17:06:44 +10:00
Andrew Tridgell
2e4766fe54
HAL_ChibiOS: ensure HI_POWER periph is on
2021-09-07 10:40:44 +10:00
