Sandro Benigno
3200781f56
Battery monitor type 3 cannot calculate battery remaining properly, due it uses only voltage reading. This path set battery_remaining to a value out-of-band for that type of monitoring. It informs to external devices to not show that info.
2012-02-11 21:01:13 -02:00
analoguedevices
0ea6ecf8d1
Removed outdated comment:
...
" // deadzone moved to
//control_in = (abs(control_in) < _dead_zone) ? 0 : control_in;"
2012-02-11 16:51:02 +00:00
Jason Short
969ac70000
reset All for Auto takeoff
2012-02-10 22:54:29 -08:00
Jason Short
b1d52da431
reset Rate_I for takeoff
2012-02-10 22:50:56 -08:00
Jason Short
efce991bfb
upped max target speed to center of loiter
2012-02-10 22:46:27 -08:00
Jason Short
8ae53bffd2
Made Yaw Hold universal for Acro
2012-02-10 22:32:55 -08:00
Jason Short
dc15fe4c5d
Moved to Rate_I by default for Jani to test
2012-02-10 22:32:55 -08:00
Jason Short
c64d781dce
get_acro_yaw added
2012-02-10 22:32:55 -08:00
Jason Short
19ab0f481e
made Yaw work like Roll and Pitch
2012-02-10 22:32:55 -08:00
Jason Short
9f8d7d5076
Minimize the Yaw Deadzone
2012-02-10 22:32:55 -08:00
Michael Oborne
8ec192cf45
fix uint > int issue - for hil
2012-02-11 11:35:59 +08:00
Michael Oborne
be079c4fe8
update dataflash log template
2012-02-11 09:47:48 +08:00
Michael Oborne
b3430563a9
APM Planner 1.1.35
...
STK cleanups
battery % fix
rc reverse fix
Polish update thanks GrzegorzSz
fix gpx's (commas)
2012-02-11 08:04:41 +08:00
Jason Short
50aaa09348
Up Nav_Rate_P
2012-02-09 22:38:36 -08:00
Jason Short
62627e9b57
reverted to Save_WP now that CH7 triggering is fixed
2012-02-09 22:33:01 -08:00
Jason Short
3afaf2689c
Fix for disabled CH7 value triggering WP saving
2012-02-09 22:32:04 -08:00
Jason Short
4313d19bc5
2.3.1v
2012-02-09 22:22:01 -08:00
Jason Short
71d57a5371
Enabled PWM test
2012-02-09 22:22:01 -08:00
Jason Short
b315e23bbd
Found missing Break in Switch statement.
2012-02-09 22:22:01 -08:00
Jason Short
2335b74bc3
faster FS timer
2012-02-09 22:22:00 -08:00
Jason Short
c35ad2d493
Loiter update - removed compensation curve. Did some more math and its's not worth the effort, harder to tune.
2012-02-09 22:22:00 -08:00
Jason Short
6848dc17e5
Added safety to prevent shutdown of motors during Auto-land
2012-02-09 22:22:00 -08:00
Jason Short
f40d40b0f9
Acro fix - we had lost the scaling of Acro mode in 2.1. This restores that.
2012-02-09 22:22:00 -08:00
Jason Short
3859ff02d4
Logging update
2012-02-09 22:22:00 -08:00
Randy Mackay
fe7a0a97ab
ArduCopter - CH7 - changed default to CH7_DO_NOTHING
2012-02-09 20:26:01 +09:00
justinbeech
cc958320f2
format fix to readme
2012-02-09 05:35:53 +00:00
levinemax
345a23273e
Motor mix update for X8 (octo quad),
...
diagrams:
http://wiki.ardupilot-mega.googlecode.com/git/images/APM1/ACM-X8_APM14.jpg
http://wiki.ardupilot-mega.googlecode.com/git/images/APM2/FRAMES_X8.jpg
2012-02-09 03:57:40 +00:00
justinbeech
287f32392e
initial upload
2012-02-09 02:59:56 +00:00
justinbeech
1a2d5505b2
Wrote a README.txt file
2012-02-09 02:58:15 +00:00
justinbeech
1205e86528
initial upload
2012-02-09 02:46:43 +00:00
justinbeech
c8e183ab60
initial upload
2012-02-09 02:46:00 +00:00
justinbeech
282f9f78fe
initial upload
2012-02-09 02:45:37 +00:00
justinbeech
a12be05679
initial upload
2012-02-09 02:45:20 +00:00
justinbeech
ec46eced18
initial upload
2012-02-09 02:44:57 +00:00
justinbeech
b2a27708e2
Adding bootloader subdirectory for APM2 hardware
2012-02-09 02:42:29 +00:00
Randy Mackay
3517964e14
ArduCopter - Camera.pde - turn off camera pitch control (which uses channel 6) when channel 6 is being used for tuning.
2012-02-08 23:51:53 +09:00
Randy Mackay
70f91e3cc3
Arducopter - reduced rate of decent when landing using sonar
2012-02-08 22:46:32 +09:00
Michael Oborne
b5cc7f9ca7
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-02-08 17:11:31 +08:00
Hazy
a89a1803a8
APM Planner
...
update Simplified Chinese UI
2012-02-08 16:29:11 +08:00
Michael Oborne
54dbb4ace9
APM Planner - 1.1.34
...
fixs based on error emails - minor
2012-02-08 07:55:46 +08:00
Pat Hickey
83326a9d62
APM_RC_APM2: Add support for CH_10 and CH_11
...
* CH_10 is on APM2 pin A10 (based on A1..A8 convention)
* CH_11 is on APM2 pin A11
* Only the code in enable_out, disable_out, and OutputCh needed to change.
* CH_10 and CH_11 always have an output period of 20ms (50Hz).
2012-02-06 22:11:01 -08:00
Michael Oborne
80ccbabe63
APM Planner 1.1.33
...
fix up small bugs - mainly error checking
update dataflash log xml - thanks randy
2012-02-06 06:33:31 +08:00
Randy Mackay
6877b8b3d6
AC_PID Library - added example sketch
2012-02-05 17:35:15 +09:00
Randy Mackay
f1a129c8ea
ArduCopter - Log.pde - fixed Log_Read_Control_Tuning so that it doesn't read too many bytes. Also fixed up some comments
2012-02-05 16:56:51 +09:00
Randy Mackay
90b39609c6
APM_PerfMon - removed because it's too big to use with our limited memory now anyway! I have a backup in case we need to resurrect it in the future.
2012-02-05 11:11:59 +09:00
Randy Mackay
498970a948
TradHeli - tiny fix for yaw_offset. Yaw_offset is used to proactively counteract rotational force caused by changing the collective pitch (i.e. rapidly climbing or decending). There was a small bug for when the collective pitch is negative (i.e. powered decent) in which case the offset was in the incorrect direction.
2012-02-05 11:04:38 +09:00
Michael Oborne
f90694c671
APM Planner 1.1.32
...
fix gauge updating
add more checks on add wp - default alt and home alt
fix xplane 10 gps heading - should be 100% working now.
fix xplane throttle issue - from rc library change - rc3_trim should be same as rc3_min
2012-02-04 17:59:37 +08:00
Andrew Tridgell
1a861b3de5
allow for lower serial baud rates
...
not many people will use less than 9600 baud, except for those wanting
to test extreme range radios, which is what I'm trying to do :-)
2012-02-04 19:07:18 +11:00
Jason Short
ef9418c2de
fix issue with low throttle in air
2012-02-03 13:29:59 +00:00
Michael Oborne
151479f769
fix issue 502
...
to identify quad over mavlink
2012-02-03 06:53:08 +08:00