Commit Graph

54 Commits

Author SHA1 Message Date
Andrew Tridgell 99ca0ea913 AP_BoardConfig: moved BRD_PWM_COUNT to common code
this allows all boards to configure some PWM outputs as GPIOs
2018-05-26 12:08:54 +10:00
LukeMike 505497b555 VRBRAIN / AP_BoardConfig: added fmu_mode parameter for VR Brain boards 2018-02-05 08:26:49 +11:00
Andrew Tridgell accac344f2 AP_BoardConfig: support ChibiOS as well as NuttX
allow for board detection with ChibiOS
2018-01-15 11:46:02 +11:00
Mark Whitehorn 560402bad4 AP_BoardConfig: clarify PX4IO SBUS enable message 2017-11-30 10:20:04 +11:00
Kevin Lopez Alvarez a51bf8c918 AP_BoardConfig: initial FMUv4pro support 2017-07-24 13:45:37 +10:00
Andrew Tridgell 401a6f5373 AP_BoardConfig: fixed FMUv1 IO update
when doing an IO firmware update uartC is used to talk to the IO
bootloader. We need to close uartC to prevent corruption of the
bootloader protocol. The uart is automatically re-opened when it is
needed
2017-07-22 16:25:17 +10:00
Eugene Shamaev a7921a273b AP_BoardConfig: move of CAN parameters into separate group and support of several interfaces 2017-07-03 11:44:32 +01:00
Andrew Tridgell a3cb6a42c9 AP_BoardConfig: drop target temperature for cube to 45
getting to 60 was taking far too long (15 minutes or so). 45 is more
achievable.

This is a result of the fix to the invensense temperature detection
code
2017-05-24 08:41:16 +10:00
Andrew Tridgell 9e74bfbc20 AP_BoardConfig: cope with bad config of pixhawk2
don't allow FMUv2 firmware on cube, and force temperature if incorrect
2017-05-24 08:41:16 +10:00
Andrew Tridgell e32e2f5b5d AP_BoardConfig: added sensor_config_error()
used to notify user of fatal sensor setup error
2017-05-03 11:37:01 +10:00
Andrew Tridgell 4c36c77db1 AP_BoardConfig: split setup of safety switch init init_safety()
this allows it to be called late, so that servo outputs are fully
setup before the safety is disabled when BRD_SAFETYENABLE=0
2017-04-30 21:47:04 +10:00
Eugene Shamaev 67a6e651d6 AP_BoardConfig: removal of legacy UAVCAN support 2017-04-17 17:27:18 +10:00
Eugene Shamaev 0b54d5764c AP_BoardConfig: support for CAN and UAVCAN at board level 2017-04-10 22:38:13 +01:00
Andrew Tridgell c118deccb0 AP_BoardConfig: added BRD_IO_ENABLE parameter
allow for px4io to be disabled completely
2017-04-05 20:14:53 +10:00
Lucas De Marchi ef1672befc AP_BoardConfig: replace board ifdef with feature ifdef 2017-03-24 12:06:19 +11:00
Lucas De Marchi 9a83f05714 AP_BoardConfig: enable voltage monitoring on aerofc 2017-03-24 12:06:19 +11:00
Lucas De Marchi 00c2949dfb Add support for baro on aerofc 2017-03-24 12:06:19 +11:00
Lucas De Marchi b17acfee12 Add aerofc support
Flight Controller board that comes on Intel Aero RTF Drone.
2017-03-24 12:06:19 +11:00
Andrew Tridgell ce978595cd AP_BoardConfig: added support for ICM-20602 detection 2017-03-02 14:21:36 +11:00
Andrew Tridgell 1989f31ae3 AP_BoardConfig: added AUAV21 board type
unfortunately this uses the same sensor types as the PHMini, which
means we can't auto-detect the difference between them.
2017-03-01 17:24:10 +11:00
Andrew Tridgell 67b97b21db AP_BoardConfig: switched to always using in-tree sensors 2016-12-19 08:07:12 +11:00
Andrew Tridgell a2e92c4054 AP_BoardConfig: increase uavcan bus settle time to 2s
needed to ensure zubax mag has time to come up
2016-11-29 12:51:16 +11:00
Andrew Tridgell ac4b100ae4 AP_BoardConfig: use in-tree drivers for FMUv1 2016-11-13 16:21:17 +11:00
Andrew Tridgell 08f770125e AP_BoardConfig: moved optional sensor startup out of AP_BoardConfig 2016-11-11 15:49:53 +11:00
Andrew Tridgell 4f50d67790 AP_BoardConfig: added board type auto-detection
using SPI probing
2016-11-11 08:08:55 +11:00
Andrew Tridgell 73122adb78 AP_BoardConfig: removed unused startup functions for Pixracer 2016-11-10 12:55:22 +11:00
Andrew Tridgell e7a9de9b41 AP_BoardConfig: use in-tree drivers for PH2SLIM 2016-11-10 11:44:52 +11:00
Andrew Tridgell b0b93f8928 AP_BoardConfig: switch pixracer to always use in-tree drivers 2016-11-09 17:08:14 +11:00
Andrew Tridgell fcf0a4ea59 AP_BoardConfig: use in-tree drivers for PHMINI 2016-11-09 17:08:13 +11:00
Andrew Tridgell 88e24dd8bd AP_BoardConfig: added board type 103
for PH2 in-tree drivers
2016-11-09 17:08:03 +11:00
Andrew Tridgell b9e1490740 AP_BoardConfig: added px4io auto-update to AP_BoardConfig 2016-11-09 17:08:00 +11:00
Andrew Tridgell 7e803df221 AP_BoardConfig: startup core peripherals for PX4 2016-11-09 17:07:59 +11:00
Andrew Tridgell 0c13c73aa0 AP_BoardConfig: removed PX4 airspeed drivers 2016-11-09 17:07:59 +11:00
Andrew Tridgell ce174489c3 AP_BoardConfig: added get_board_type() for PX4
used to decide what drivers to start
2016-11-09 17:07:58 +11:00
murata c808ee2f49 Global: To nullptr from NULL.
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Andrew Tridgell 7bf81c44b0 AP_BoardConfig: allow programmatic setting of default safety mask 2016-10-21 11:53:34 +11:00
Andrew Tridgell 0bd3b8ecbd AP_BoardConfig: fixed bug in fmu safety mask set 2016-10-21 09:10:55 +11:00
Andrew Tridgell 8cb93ae7c3 AP_BoardConfig: call PWM_SERVO_IGNORE_SAFETY on fmu as well 2016-10-21 09:10:55 +11:00
Andrew Tridgell aa4cde1aae AP_BoardConfig: work around issues with bad components on some FMUv4 boards
some pixracer copies have poor components which can cause sensor bus
brownout on boot. This resets the sensor bus for 20ms on boot to try
to get clean sensor startup
2016-09-08 13:18:13 +10:00
Andrew Tridgell b9c4a948d1 AP_BoardConfig: fixed startup ordering change in canbus vs external mag 2016-09-04 18:48:26 +10:00
Andrew Tridgell 119e312cd3 AP_BoardConfig: wait up to 0.4s for safety to be off on boot 2016-08-16 12:53:34 +10:00
Grant Morphett 30bcea73cc PX4: Added detection for MPU6000 on px4slim. 2016-08-11 08:39:16 +10:00
LukeMike 38150a5544 AP_BoardConfig: defined and managed VRBRAIN board type and all functions for sensors startup 2016-08-11 07:52:40 +10:00
Andrew Tridgell eaa88b1223 AP_BoardConfig: FMUv1 does not have pwm_input driver 2016-08-10 19:54:01 +10:00
Andrew Tridgell 39676d686c AP_BoardConfig: FMUv1 does not have an L3GD20 2016-08-10 19:54:01 +10:00
Andrew Tridgell 7da89c611d AP_BoardConfig: use a STATUSTEXT to show better in MP
this makes it easier to see why it won't boot
2016-08-10 19:54:01 +10:00
Andrew Tridgell 0d59935847 AP_BoardConfig: fixup for merge after VRBrain changes 2016-08-10 19:54:00 +10:00
Andrew Tridgell 77bee322e9 AP_BoardConfig: support the PHMINI as BRD_TYPE=5 2016-08-10 19:54:00 +10:00
Andrew Tridgell 61e15af3ca AP_BoardConfig: added BRD_TYPE
this allows for PH2SLIM support with BRD_TYPE=6
2016-08-10 19:54:00 +10:00