Andrew Tridgell
4e4a4a685c
fixed two more CONFIG_HARDWARE #ifdef bugs
2011-12-13 17:05:48 +11:00
Jason Short
29788b98bd
Adjustments for High Wind enviroments
2011-12-12 17:47:45 -08:00
Jason Short
424a11d269
Stability patch2 - Jose style.
2011-12-12 17:47:45 -08:00
Jason Short
6b1bedc381
Gain updates
2011-12-12 17:47:45 -08:00
Jason Short
a386ea5e06
Added a simplified Log that is just GPS for my 1280 board
2011-12-12 17:47:45 -08:00
Jason Short
6bac318def
Added param option for Simple mode reset
2011-12-12 17:47:45 -08:00
Jason Short
3edd471983
Upped the max pitch to deal with wind - based on T3 testing
2011-12-12 10:10:33 -08:00
Jason Short
e1146b6df6
Just upped the nav_imax value
2011-12-12 10:10:33 -08:00
Andrew Tridgell
6857d9af14
fixed LOGGING_ENABLED default on ArduCopter
2011-12-12 23:40:43 +11:00
Andrew Tridgell
e184d1dfe4
quad: fixed the comments on the + motors
2011-12-12 21:01:58 +11:00
Andrew Tridgell
ae1ec05dd4
fixed barometer detection on APM2
2011-12-12 15:45:36 +11:00
Andrew Tridgell
483754cb70
fixed == that should be =
2011-12-12 15:19:50 +11:00
Andrew Tridgell
cadc5bde1d
fixed hil ArduCopter build
2011-12-12 15:14:55 +11:00
Andrew Tridgell
dd4498d113
desktop: fixed Wire.begin() build problem
2011-12-12 15:14:55 +11:00
Andrew Tridgell
65ed8cc2c3
added sitl build target
2011-12-12 15:14:55 +11:00
Andrew Tridgell
faf58a355b
airspeed: use floating point values and better averaging in zero_airspeed()
...
this makes the calibration of airspeed a bit more accurate, and
prevents truncation of airspeed values
2011-12-12 15:14:55 +11:00
Pat Hickey
067724b4f1
ArduCopter: update AP_Baro constructors & initializers
2011-12-11 15:21:10 -08:00
Pat Hickey
6710cf5c5a
Wire and SPI Init: move to sketch system.pde from libraries
...
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin removed from AP_Baro_MS5611::init()
* SPI.begin removed from AP_InertialSensor_MPU6000::hardware_init()
* Both Wire.begin and SPI.begin added very early in init_ardupilot in
ArduCopter/system.pde and ArduPlane/system.pde
2011-12-11 15:21:10 -08:00
Pat Hickey
67436d7ff2
ArduCopter: Get barometer data in terms of AP_Baro interface
...
* Major change: Log.pde Log_Write_Control_Tuning has changed significantly
* MS5611 has no concept of RawPres and _offset_press
* Log the get_pressure() instead. (If we don't trust the barometer, what's the point?)
2011-12-11 15:21:10 -08:00
Pat Hickey
bd00b629e7
ArduCopter Init: different call to barometer.init based on CONFIG_BARO
...
* BMP085 has two arguments, second varying on apm1/apm2
* ms5611 has no arguments
2011-12-11 15:21:10 -08:00
Pat Hickey
82b8f4d7b7
ArduCopter: instantiate correct AP_Baro object based on CONFIG_BARO
2011-12-11 15:21:09 -08:00
Pat Hickey
5fd8fea957
ArduCopter & ArduPlane: Added support for apm2beta build via APM2_BETA_HARDWARE define
...
* This enables the BMA085 driver for compatibility with beta boards.
* The CLI_SLIDER_ENABLED=DISABLED line does not need to be in the makefile.
config.h takes care of this default.
2011-12-11 15:21:09 -08:00
Pat Hickey
0b0922d04c
ArduCopter: added config.h and defines.h to support CONFIG_BARO
2011-12-11 15:21:09 -08:00
Pat Hickey
698a231dd6
ArduCopter: Rename APM_BMP085 classes to AP_Baro_BMP085 classes.
2011-12-11 15:21:09 -08:00
Pat Hickey
05b6f4be81
ArduCopter CLI: Add imu.init before imu.init_accel for "level"
...
* Depending on when you entered the CLI, the imu might not be
initialized yet, and init_accel would hang.
2011-12-11 15:19:46 -08:00
Pat Hickey
273492bc66
ArduCopter: Revert "Switched to Gyro only startup"
...
This reverts commit f932f0a9f6a29e9c3193622109298c657ed5a908.
I fixed this bug in 734185599cd9d6a487c675460c09895172e012b0.
It is no longer valid to call IMU::init_gyro() before IMU::init().
2011-12-11 14:50:02 -08:00
Jason Short
4efbae4a1c
Hack to prevent fly aways
...
Cleanup to remove SIMPLE mode switch note
2011-12-11 12:01:06 -08:00
Jason Short
c01361a79d
removed CLI switch by default, decreased Nav I
2011-12-11 09:53:44 -08:00
Jason Short
b442a1b23c
added debug prints, broke out Angle val to debug
2011-12-11 09:53:44 -08:00
Jason Short
4ff5d5016a
fix for navigation scaleLongUp
2011-12-11 09:53:44 -08:00
Randy Mackay
26705111e1
ArduCopter - small fixes to fix HIL compile errors
2011-12-11 23:25:03 +09:00
Randy Mackay
62a7b19600
Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types
2011-12-11 16:40:59 +09:00
Jason Short
a0cef1cc88
made it so nav is called in Simple mode
2011-12-10 23:31:37 -08:00
Jason Short
995727383b
Adjust Simple mode on the fly.
2011-12-10 23:29:29 -08:00
Jason Short
37f1a574fa
Set Nav_WP as home
2011-12-10 23:26:10 -08:00
Jason Short
64cb2a54cf
eased up on the i term blocker
2011-12-10 23:25:52 -08:00
Jason Short
9c3475f168
Made landing slower
2011-12-10 19:33:19 -08:00
Jason Short
2b06a54fc5
Allows you to clear the stored mission when in Auto
2011-12-10 19:32:46 -08:00
Jason Short
6228dfb37c
Will add a landing command to last WP if we are on the ground.
2011-12-10 19:29:42 -08:00
Jason Short
146d52d650
Switched to Gyro only startup
2011-12-10 15:13:20 -08:00
Jason Short
2defbe818f
rework of inflight trim.
2011-12-10 15:05:53 -08:00
Jason Short
37f3875968
Removed Instant PWM from disarmed output
2011-12-10 10:33:25 -08:00
Jason Short
34213e745c
Ground course saved as long for SIM compat
2011-12-10 10:19:20 -08:00
Jason Short
f444aac706
Added SIMPLE mode reset outside of bounding box of 10M, will do more testing before enabling.
2011-12-10 10:19:20 -08:00
Jason Short
7c1a975a71
Made Baro_alt int32_t
...
Added home to copter bearing, home to copter distance
Added Land mode
2011-12-10 10:19:20 -08:00
Jason Short
a9e82e3fbd
Debugging some motor issues
2011-12-10 10:19:20 -08:00
Jason Short
22e4ed67aa
Added Home Bearing
2011-12-10 10:19:20 -08:00
Jason Short
9afd99b834
Added notes to Imu.ax, ay, az
2011-12-10 10:19:20 -08:00
Jason Short
9ef902d4a5
Added enumeration for Land
2011-12-10 10:19:20 -08:00
Jason Short
718af404ed
Increased slightly the Auto_trim time
2011-12-10 10:19:20 -08:00