Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
48,443 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

182 Commits

Author SHA1 Message Date
Andrew Tridgell 691794bb41 AP_NavEKF3: added EK3_PRIMARY parameter 
allows for selection of which IMU to use on startup
 2021-10-13 18:09:56 +11:00
Randy Mackay 837df29179 AP_NavEKF3: remove unused EK3_GSF_DELAY param 2021-08-14 16:41:52 +10:00
Paul Riseborough 998cad030e AP_NavEKF3: Revert IMU and wind speed process noise parameter defaults 
These give noisier state estimates, but are more robust to rapid changes in IMU biases.
TODO implement a means of using the modified parameters when there are more than one EKF instance running with IMU's that are sampling at a higher rate.
 2021-07-25 09:30:25 +10:00
Paul Riseborough 73229371c7 AP_NavEKF3: retune wind process noise for better airspeed fault detection 2021-07-25 09:30:25 +10:00
Paul Riseborough 8744b0954f AP_NavEKF3: Fix bug preventing copter wind estimation at low speed 
Also re-tunes process noise default for smoother wind velocity state estimates.
 2021-07-25 09:30:25 +10:00
Paul Riseborough 6637d9dece AP_NavEKF3: Revert EK3_BETA_MASK parameter extension 
These are not required due to use of bit 7 in FLIGHT_OPTIONS to achieve the same function.
 2021-07-25 09:30:25 +10:00
Paul Riseborough 1d3ed8e9da AP_NavEKF3: Rework non-airspeed wind estimation 
Faster wind estimation when not using airspeed with acceptable noise in wind velocity estimates.
 2021-07-25 09:30:25 +10:00
Paul Riseborough fdea45a3e4 AP_NavEKF3: Add accessor function for vibration affected status 2021-07-25 09:30:25 +10:00
Paul Riseborough eb5a82dd38 AP_NavEKF3: Adjust gyro bias process noise tuning 
NEw value is a compromise between roll/pitch angle and horizontal state velocity estimation errors and the noise in the gyro bias estimate
 2021-07-25 09:30:25 +10:00
Paul Riseborough ffce6fab70 AP_NavEKF3: Retune IMU process noise 
Required to achieve equivalent fusion noise and weighting on IMU vs other sources to previous param defaults with the old covariance prediction equations.
 2021-07-25 09:30:25 +10:00
Paul Riseborough 77082e414b AP_NavEKF3: Make gyro bias learning less noisy 2021-07-25 09:30:25 +10:00
Randy Mackay 5697e5616c AP_NavEKF3: EK3_RNG_USE_HGT param references EK3_SRCx_POSZ 2021-07-22 16:01:00 +10:00
Peter Barker 156a220d5b AP_NavEKF3: pass NavEKF failures back up to callers 2021-07-22 16:01:00 +10:00
Andrew Tridgell a6c5b65f4a AP_NavEKF3: allow for double EKF build 2021-07-22 16:01:00 +10:00
Josh Henderson b85afc0adc AP_NavEKF3: non_GPS modes ensure EKF origin set only once and stays in sync 
ekf3
 2021-07-04 08:19:10 +10:00
Peter Barker d6348a0786 AP_NavEKF3: remove getBodyFrameOdomDebug 
Not used after we moved logging to be within AP_NavEKF3
 2021-06-07 09:28:52 +10:00
Peter Barker dd3ab29b2f AP_NavEKF3: remove getFilterGpsStatus 
Not needed after we moved logging into NavEKF3
 2021-06-07 09:25:53 +10:00
Paul Riseborough 124f016e5b AP_NavEKF3: Use parameter to set baro ground effect dead-zone 2021-06-02 11:13:16 +09:00
Peter Barker c00f110f3d AP_NavEKF3: use DAL APIs for takeoff/touchdown expected 2021-06-02 11:13:16 +09:00
Paul Riseborough 53c4b163ce AP_NavEKF3: Allow adjustment of on ground not moving test sensitivity 
Also re-tune default sensitivity based on user supplied logs with noisy gyro data.
 2021-03-23 10:05:59 +11:00
murata c5b1c832ba AP_NavEKF3: Change misnomer (NFC) 2021-03-15 18:21:15 +11:00
Paul Riseborough 4675aea0bf AP_NavEKF3: Update parameter description 2021-03-05 12:10:01 +11:00
Paul Riseborough 6a603019d5 AP_NavEKF3: Add accessor function for yaw alignment status 2021-03-05 12:10:01 +11:00
Paul Riseborough 912db3512e AP_NavEKF3: Fix EKF selection bug 2021-03-05 12:10:01 +11:00
Paul Riseborough 9a5a264aa0 AP_NavEKF3: Improve wind estimation without airspeed sensing 
Enable default airspeed variance to be specified externally
Improve control of sideslip fusion
Don't modify non wind states unnecessarily when using synthesised air data measurements
 2021-03-05 12:10:01 +11:00
murata ae565aef1a AP_NavEKF3: Change misnomer (NFC) 2021-03-03 20:49:55 +11:00
Paul Riseborough 7370cd9f00 AP_NavEKF3: Fix typo and update parameter description 2021-02-22 13:21:03 +09:00
Randy Mackay f6cb0819ef AP_NavEKF3: pre_arm_check may skip position checks 2021-01-26 10:46:49 +11:00
Peter Barker 3582b69e9c AP_NavEKF3: remove getFilterTimeouts access methods 2021-01-22 13:04:36 +11:00
Peter Barker b3bacdd33c AP_NavEKF3: remove internal-only getTiltError method 2021-01-21 21:26:17 +11:00
Peter Barker 5ad0ac6727 AP_NavEKF3: remove unused getAccelNED method 2021-01-21 21:26:17 +11:00
Randy Mackay 4492e5024c AP_NavEKF3: enable ekf3 by default 2021-01-16 08:24:23 +09:00
Randy Mackay 27c998ad94 AP_NavEKF3: rename source and yawFusionMethod from EXTERNAL to GPS 2021-01-05 10:58:06 +11:00
Andrew Tridgell e747edbcf2 AP_NavEKF3: fixed init order for scheduler 
this can impact replay of EKF2
 2021-01-02 10:30:26 +11:00
Randy Mackay 39be85cef4 AP_NavEKF3: integrate Source loss of init 2020-12-21 16:56:38 +09:00
Dr.-Ing. Amilcar do Carmo Lucas f77ab30f7a Revert "AP_NavEKF3: Remove unsupported parameter unit descriptions" 
This reverts commit 4f4a2f446d.
Makes more sense to add those to the list of supported units
 2020-12-15 18:22:36 +11:00
Paul Riseborough ed17d8e48f AP_NavEKF3: Improve parameter display names 2020-12-11 15:21:41 +11:00
Andrew Tridgell b86c014400 AP_NavEKF3: rename drag parameters to start with EK3_DRAG_ 2020-12-11 15:21:41 +11:00
Andrew Tridgell be4d10a95e AP_NavEKF3: rework parameter handling 
and fixed indentation
 2020-12-11 15:21:41 +11:00
Paul Riseborough 0d2c235027 AP_NavEKF3: Fix #define typo 2020-12-11 15:21:41 +11:00
Paul Riseborough ab05e8ed4a AP_NavEKF3: Update param descriptions 2020-12-11 15:21:41 +11:00
Paul Riseborough 4f4a2f446d AP_NavEKF3: Remove unsupported parameter unit descriptions 2020-12-11 15:21:41 +11:00
Paul Riseborough c9ab4b18b0 AP_NavEKF3: Add multicopter wind estimation 2020-12-11 15:21:41 +11:00
Andrew Tridgell 80f7906744 AP_NavEKF3: removed inhibitGps and inhibitGpsVertVel options 
these were unused
 2020-12-01 10:33:50 +11:00
Randy Mackay 4cd1c3cfde AP_NavEKF3: param conversion loses config_error 
config_error should only be run as part of setup because it may never return
 2020-11-27 08:20:07 +09:00
Randy Mackay adfc92523b AP_NavEKF3: add configuredToUseGPSForPosXY 2020-11-25 21:00:07 +11:00
Andrew Tridgell 7eea13f86f AP_NavEKF3: fixed build of standalone replay link test 
parameter conversion not needed for replay
 2020-11-24 20:46:37 +11:00
Peter Barker e1a033b296 AP_NavEKF3: make logging a core concern 
Also dissolve some methods only used for logging
 2020-11-22 20:47:29 +11:00
Peter Barker 914629351f AP_NavEKF3: use scalar rather than array for state-prediction-allowed 
EKF2 needs this for choosing alternate cores.  EKF3 does not.
 2020-11-22 14:09:48 +11:00
Randy Mackay d1983b0b77 AP_NavEKF3: fixup source param conversion 
shorten param conversion config error
if gps and optical flow are enabled we default SRC2_VELXY to optflow
convert_params run from InitialiseFilter
ensure param conversion only run once
 2020-11-20 16:43:44 +09:00