Peter Barker
4c272d21ee
AP_HAL_ChibiOS: make compass.mag_cal_fixed_yaw return boolean
...
this method could be used from a transmitter without GCS enabled, for example
2024-02-06 11:11:27 +11:00
Peter Barker
9961e8c49d
hwdef: remove bad hwdef lines
...
these have no effect
2024-02-06 10:58:44 +11:00
Peter Barker
0d26118b12
hwdef: tidy AP_Radio includes
2024-02-05 09:26:14 +11:00
Andrew Tridgell
85439360d7
HAL_ChibiOS: fixed I2C4 on STM32G4
2024-02-05 07:36:14 +11:00
Andrew Tridgell
1e4f597e02
HAL_ChibiOS: fixed support for STM32H7A3
...
need to tell ChibiOS this is a newer H7
2024-02-03 08:36:18 +11:00
Peter Barker
a82b7f20c9
AP_HAL_ChibiOS: use HAL_LOGGING_ENABLED in place of HAL_BOOTLOADER_BUILD
...
bootloader already disables GCS, so we can rely on HAL_GCS_ENABLED in place of HAL_BOOTLOADER_BUILD
2024-02-02 19:21:58 +11:00
David O'Connor
078697c825
hwdef: add AnyLeaf H7 board
2024-02-01 11:43:57 +11:00
Leonardo Garcia
5749bd5074
AP_HAL_ChibiOS: mRo KitCAN revC board fix
...
Add RM3100 reversal mask to deal with M10025C board changes.
2024-02-01 11:43:35 +11:00
Andrew Tridgell
33f6a1d87e
hwdef: added MatekH7A3 support
2024-02-01 11:43:24 +11:00
Andrew Tridgell
054fb94e9a
HAL_ChibiOS: added support for STM32H7A3
...
interesting MCU as it is the first H7 we support that doesn't have a
128k flash sector size
2024-02-01 11:43:24 +11:00
Andrew Tridgell
3171b5321a
HAL_ChibiOS: support flash storage with 8k sectors
...
this allows for doubling up sectors to give an effective sector size
of 16k, allowing for flash storage with a useful storage size
2024-02-01 11:43:24 +11:00
Andrew Tridgell
07d0418cf9
HAL_ChibiOS: fixed flash support on H7 with 8k page size
...
the STM32H7A3xx has 8k pages
2024-02-01 11:43:24 +11:00
yjuav
8e71cf83cd
hwdef: add YJUAV_A6Ultra board support
2024-02-01 11:29:11 +11:00
Andrew Tridgell
30497244d9
HAL_ChibiOS: whitespace fixes
2024-01-30 12:32:23 +11:00
Andrew Tridgell
0a6057f2b3
HAL_ChibiOS: adjust clocks for H723 and H730
...
FDCAN clock must be 80MHz, and also align no-crystal clocks with
clocks for boards with crystals
2024-01-30 12:32:23 +11:00
Andrew Tridgell
aea2863141
hwdef: Added BotBloxSwitch
2024-01-30 12:32:23 +11:00
Andrew Tridgell
967af533b9
HAL_ChibiOS: fixed flash page count on H723
...
single bank H7 has 8 pages
2024-01-30 12:32:23 +11:00
Andrew Tridgell
4eaf5ef247
HAL_ChibiOS: support STM32H723 boards
2024-01-30 12:32:23 +11:00
Andrew Tridgell
e772012e01
HAL_ChibiOS: raise SDMMC clock limit on H7
...
this allows for faster log download on ethernet
2024-01-29 06:51:11 +11:00
Andrew Tridgell
a2707b48c5
HAL_ChibiOS: enable clock management on G4
...
this allows for a different clock tree in the main fw from the
bootloader
2024-01-25 11:44:02 +11:00
Andrew Tridgell
2d031a4d20
HAL_ChibiOS: switched G4 FDCAN clock to 80MHz
...
this requires main CPU clock at 160 MHz instead of 168 MHz
2024-01-25 11:44:02 +11:00
Andrew Tridgell
1c8048df8f
HAL_ChibiOS: fixed CANFD timings
...
our CANFD timings were resulting in a lot of busoff errors. Here is an
example of master at 1Mbit/5MBit:
Getting @SYS/can0_stats.txt as -
------- Clock Config -------
CAN_CLK_FREQ: 80MHz
Std Timings: bitrate=1000000 presc=7
sjw=0 bs1=7 bs2=0 sample_point=90.00000%
FD Timings: bitrate=5000000 presc=1
sjw=0 bs1=5 bs2=0 sample_point=90.00000%
------- CAN Interface Stats -------
tx_requests: 2689
tx_rejected: 0
tx_overflow: 443
tx_success: 7
tx_timedout: 2232
tx_abort: 0
rx_received: 18470
rx_overflow: 0
rx_errors: 0
num_busoff_err: 34439
num_events: 18477
ECR: F8
fdf_rx: 18467
fdf_tx_req: 2182
fdf_tx: 0
here is an example with the new timings:
------- Clock Config -------
CAN_CLK_FREQ: 80MHz
Std Timings: bitrate=1000000 presc=8
sjw=1 bs1=8 bs2=1 sample_point=90.00000%
FD Timings: bitrate=8000000 presc=2
sjw=3 bs1=8 bs2=3 sample_point=80.00000%
------- CAN Interface Stats -------
tx_requests: 3023
tx_rejected: 0
tx_overflow: 0
tx_success: 3023
tx_timedout: 0
tx_abort: 0
rx_received: 27865
rx_overflow: 0
rx_errors: 0
num_busoff_err: 0
num_events: 30888
ECR: 0
fdf_rx: 27862
fdf_tx_req: 3016
fdf_tx: 3016
I am testing between a CubeOrange and a Pixhawk6X. I tested 1, 2, 4, 5
and 8 MBit (which are the only valid FD bitrates in our parameters)
Many thanks to Kai from Salient Motion for finding this issue and
providing the corrected timing table
2024-01-25 11:44:02 +11:00
Hayden Donald
a81f2785aa
AP_HAL_ChibiOS: Use correct pin config for ADC2 and ADC3
2024-01-24 08:03:24 +11:00
MallikarjunSE
873e2eac7d
AP_HAL_ChibiOS: update truenav hwdef
2024-01-24 07:58:09 +11:00
Andrew Tridgell
e714f0a7a3
AP_HAL_ChibiOS: fixed name of pitch limit parameters
2024-01-23 15:00:30 +11:00
Andrew Tridgell
a6bceccd82
AP_HAL_ChibiOS: convert param files LIM_ROLL_CD -> ROLL_LIMIT_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
862b0ed8d6
AP_HAL_ChibiOS: convert param files for pitch limits
2024-01-23 15:00:30 +11:00
Andrew Tridgell
e5199a71d6
AP_HAL_ChibiOS: convert ALT_HOLD_RTL to RTL_ALTITUDE
2024-01-23 15:00:30 +11:00
Andrew Tridgell
f935cbaead
AP_HAL_ChibiOS: convert ARSPD_FBW_MIN/MAX to AIRSPEED_MIN and AIRSPEED_MAX
2024-01-23 15:00:30 +11:00
Andrew Tridgell
98d40d0e58
AP_HAL_ChibiOS: converted TRIM_ARSPD_CM to AIRSPEED_CRUISE
2024-01-23 15:00:30 +11:00
Andy Piper
6c634ebc00
AP_HAL_ChibiOS: allow dshot beeps to play on all dshot ESC types
2024-01-23 11:58:55 +11:00
Peter Barker
331110639e
AP_HAL_ChibiOS: rename COMPASS_TYPEMASK to COMPASS_DISBLMSK
...
this is a very confusingly named parameter. I've seen several instances of people treating this as an enable mask rather than a disable mask
2024-01-23 11:54:49 +11:00
Andrew Tridgell
140518da3c
hwdef: added support for Holybro6X-45686
2024-01-23 11:49:14 +11:00
bugobliterator
9de1b6164b
AP_HAL_ChibiOS: add more pins to STM32H757 ADC channel map
2024-01-22 20:35:16 +11:00
bugobliterator
b17d864d1a
AP_HAL_ChibiOS: fix set_pin and _pin_scalar methods for ADC2 and ADC3
2024-01-22 20:35:16 +11:00
MallikarjunSE
f71fc58767
AP_HAL_ChibiOS: Add hwdef for TrueNavPro-G4
2024-01-21 13:10:10 +11:00
MallikarjunSE
6231a5edfd
AP_HAL_ChibiOS: add TrueNavIC hwdef
2024-01-21 13:10:10 +11:00
Andrew Tridgell
f7c7ee00e9
HAL_ChibiOS: added a delete_next thread field for cleanup
...
allows for cleanup of web server threads in bootloader
2024-01-21 12:30:08 +11:00
Andrew Tridgell
5e7b211b79
HAL_ChibiOS: moved M4 disable into H757 script
...
this fixes assert checking in the bootloader and for boards other than
CubeRedPrimary
2024-01-21 12:30:08 +11:00
Andrew Tridgell
b49a7da32a
hwdef: disable use of external flash in PPPGW
...
we cannot upload new firmware on CAN or network with external flash
2024-01-21 12:30:08 +11:00
Andrew Tridgell
855a5d28c0
hwdef: use a common PPPGW include
...
and fixed missing RTC bindings in web server
2024-01-21 12:30:08 +11:00
Andrew Tridgell
3a84f35593
HAL_ChibiOS: support building with no GPIOs
2024-01-21 12:30:08 +11:00
Andrew Tridgell
f225d797d2
hwdef: use common include for network bootloader
2024-01-21 12:30:08 +11:00
Andrew Tridgell
4e49481d3a
hwdef: enable USB for bootloader on Pixhawk6X-PPPGW
2024-01-21 12:30:08 +11:00
Andrew Tridgell
91cc0d7dba
HAL_ChibiOS: ensure periph uses same RAM0 address as bootloader
...
this fixes passing of addresses for boards that use an ALT_RAM_MAP
2024-01-21 12:30:08 +11:00
Andrew Tridgell
82dea9c037
HAL_ChibiOS: ensure our reserved ram is not in available ram regions
...
this prevents a fault when the ram0 region is filled in by the periph
code on boards that do dynamic memory allocation
2024-01-21 12:30:08 +11:00
Andrew Tridgell
a155f592a4
hwdef: added CubePilot PPPGW builds
2024-01-21 12:30:08 +11:00
Andrew Tridgell
2fee9e69db
HAL_ChibiOS: support ROMFS_DIRECTORY in hwdef.dat
2024-01-21 12:30:08 +11:00
Andrew Tridgell
46f65aec4e
AP_Periph: moved web UI script to Tools/AP_Periph
...
for use in multiple boards
2024-01-21 12:30:08 +11:00
Andrew Tridgell
69f23edd4a
hwdef: added bootloader web server for Pixhawk6X-PPPGW
2024-01-21 12:30:08 +11:00