Andrew Tridgell
81302fe190
Copter: implement MAV_CMD_REQUEST_AUTOPILOT_CAPABILITIES
2015-02-12 09:04:20 +11:00
Jonathan Challinger
0cc83b1826
Copter: use hal.util soft_armed state
2015-02-11 20:25:11 +11:00
Andrew Tridgell
4ade22c94b
Copter: use common send_autopilot_version()
2015-02-11 19:50:51 +11:00
Jonathan Challinger
62c63e9b35
Copter: support AUTOPILOT_VERSION_REQUEST message
2015-02-11 19:11:53 +11:00
Jonathan Challinger
c5d66cdfba
Copter: add send_autopilot_version
2015-02-11 19:11:53 +11:00
Randy Mackay
e7ac9d27f5
Copter: AC3.2.1 release notes
...
No changes from AC3.2.1-rc2
2015-02-11 14:08:57 +09:00
Randy Mackay
99ca779718
Copter: fix to allow arming in Guided from GCS
2015-02-10 22:12:38 +09:00
Randy Mackay
4ff75f0371
Copter: perf info ignores slow loop due to arming
2015-02-09 23:07:18 +09:00
Randy Mackay
8b5f1575ad
Copter: remove pre-arm check of RC3_TRIM
...
RC3_TRIM parameter is not used so we can remove this check
2015-02-06 17:55:28 +09:00
Randy Mackay
a70f98552e
Copter: rename xy_mode
2015-02-06 17:00:58 +09:00
Jonathan Challinger
e71ad72fc0
Copter: update usage of update_xy_controller
2015-02-06 17:00:51 +09:00
Robert Lefebvre
0b1f217420
Copter: Add PreArm check for radio trims.
2015-02-05 11:17:58 +09:00
Robert Lefebvre
2186dec271
Copter: Remove trim_radio() function.
2015-02-05 11:17:56 +09:00
Randy Mackay
ecaf3280e5
Copter: update AC3.2.1-rc2 release notes
2015-02-03 15:58:33 +09:00
Jonathan Challinger
4311fa8952
Copter: 90-atan2(-x,y) is the same as atan2(y,x)
2015-02-03 14:48:02 +09:00
Jonathan Challinger
f77b359e83
Copter: increase get_roi_yaw from 40hz to 100hz
2015-02-03 14:46:17 +09:00
Jonathan Challinger
2cb63dc792
Copter: don't assume home is at the origin
2015-02-03 11:38:25 +09:00
Jonathan Challinger
9c2865f6a8
Copter: update pv_location_to_vector to use get_origin instead of get_home
2015-02-03 11:38:23 +09:00
Jason Short
3b5228922e
Copter: increased ESC auto-cal delay
2015-02-03 11:33:54 +09:00
Andrew Tridgell
51dc3c120d
Copter: handle GIMBAL_REPORT receive and send
...
Pair-Programmed-With: Randy Mackay <rmackay9@yahoo.com>
2015-02-03 09:49:15 +11:00
Randy Mackay
f00861d2f1
Copter: using arming_failed as event
2015-02-03 06:14:56 +09:00
Randy Mackay
9e813948fa
Copter: protect against multiple arming messages
...
Protect against the GCS sending multiple arming messages close together
which disrupts the gyro calibration
2015-02-02 22:31:20 +09:00
Randy Mackay
32cb901ce3
Copter: allow arming at mid throttle in AltHold, Loiter
2015-02-02 22:31:18 +09:00
Randy Mackay
e7f20c04c3
Copter: init_arm_motors calls pre-arm checks
...
This reduces a small amount of duplicated code in the pilot initiated
arming and GCS initiated arming functions
2015-02-02 22:31:14 +09:00
Randy Mackay
f4c392c64d
Copter: pre_arm_checks returns success or failure
...
This makes the pre-arm check function consist with the other arming
check functions
2015-02-02 22:31:11 +09:00
Randy Mackay
64af4ff923
Copter: rename set_servos_4 to motors_output
2015-02-02 22:31:08 +09:00
Randy Mackay
8754ce9eed
Copter: move 80% thr limit to MotorsTri
2015-02-02 22:31:04 +09:00
Randy Mackay
43ba94e99a
Copter: rename manual_flight_mode to mode_has_manual_throttle
2015-02-02 22:31:01 +09:00
Randy Mackay
3aac281c5a
Copter: land detector requires desired climb rate be < -20cm/s
2015-01-31 17:23:43 +09:00
Randy Mackay
3e872c71fc
Copter: AC3.2.1-rc2 release notes
2015-01-30 16:23:52 +09:00
Robert Lefebvre
8e8ec09740
Copter: update pos_control alt_max from fence at 1hz
2015-01-30 14:13:49 +09:00
Randy Mackay
e0cfe091fb
Copter: setup uart after checking usb_connected
2015-01-29 14:05:15 +11:00
Randy Mackay
8ea65c2dc2
Copter: APM_Config define to disable FRSKY telem
2015-01-29 14:05:14 +11:00
Randy Mackay
f91fb9a4e8
Copter: rename frsky_telemetry_send function
2015-01-29 14:05:14 +11:00
Randy Mackay
34503de18e
Copter: integrate SerialManager
...
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:14 +11:00
Randy Mackay
7ffcf62e2e
Copter: move MNT param's underscore to mount lib
2015-01-29 13:57:19 +11:00
Randy Mackay
c51ba8cd03
Copter: integrate mount frontend-backend restructure
...
initialise mount on startup
use Mount::has_pan_control method
Remove calls to unimplemented mount.configure_cmd
Remove call to update_mount_type which will be handled from within mount
lib
2015-01-29 13:57:18 +11:00
Randy Mackay
31b2534c1d
Copter: rename mount.set_roi_cmd to set_roi_target
2015-01-29 13:57:18 +11:00
Randy Mackay
18f8ffab6f
Copter: remove land detector bar climb rate definition
2015-01-28 10:59:15 +09:00
Jonathan Challinger
9d585700f8
Copter: remove baro climb rate check from land detector
2015-01-28 10:57:00 +09:00
Matthias Badaire
a2d71d2811
Copter: Frsky telemtry change move parameter to init of the class
...
Parameter needs to be passed and use at the init of the class frsky telem
2015-01-22 16:49:39 +11:00
Randy Mackay
1819bd48f4
Copter: remove home_is_set checks from Loiter, PosHold, RTL
...
This allows these flight modes to potentially operate even when the
vehicle has never had a GPS lock.
Potentially we should replace this with a check that the EKF's origin
has been set
2015-01-22 14:40:19 +09:00
Randy Mackay
d49489ca7e
Copter: optflow_position_ok requires using EKF
2015-01-22 14:40:13 +09:00
Randy Mackay
01f1ce4cb3
Copter: position_ok false when EKF in const pos mode
2015-01-22 14:40:11 +09:00
Randy Mackay
74ac79ba10
Copter: Drift uses throttle_zero flag
2015-01-22 14:40:08 +09:00
Randy Mackay
02d0b05926
Copter: minor format fix
2015-01-22 14:40:05 +09:00
Randy Mackay
4185d17915
Copter: fix to RTL, PosHold and Loiter's use of filter status
2015-01-22 14:40:02 +09:00
Randy Mackay
cc52bbbffb
Copter: update current loc once home is set
2015-01-22 14:39:59 +09:00
Randy Mackay
f1a6b06586
Copter: remove redundant filter status checks
2015-01-22 14:39:57 +09:00
Randy Mackay
3641d3d508
Copter: send inav velocities in global position message
...
Also absolute alt now calculated from home alt + current alt above home
instead of using GPS absolute alt
2015-01-22 14:39:54 +09:00
