Iampete1
|
b87dd8980a
|
ChibioOS: hwdef: CUAV-X7: add note about incorrect ADC scale factor
|
2023-02-28 11:26:35 +11:00 |
Tom Pittenger
|
07be987073
|
AP_HAL_ChibiOS: enable SagetechMXS driver by default only for CUAV-X7 and CubeOrange
|
2022-06-14 07:10:17 -07:00 |
李孟晓
|
dfe2ade495
|
CUAV-X7: Add servo voltage detection pin
|
2021-11-22 16:39:15 +11:00 |
Randy Mackay
|
9c1ca781f6
|
AP_HAL_ChibiOS: update for renamed BRD_HEAT_ parameters
|
2021-11-09 08:02:57 +09:00 |
Andrew Tridgell
|
68146d541c
|
HAL_ChibiOS: removed boilerplate lines from bootloaders
|
2021-10-26 15:56:53 +11:00 |
Andrew Tridgell
|
d962e094e7
|
HAL_ChibiOS: change RCIN PULLUP to PULLDOWN
this makes us more consistent between boards
|
2021-10-12 11:52:36 +11:00 |
Peter Barker
|
70aef84997
|
AP_HAL_ChibiOS: remove definitions of BOARD_PWM_COUNT_DEFAULT
No longer used
|
2021-08-20 10:51:19 +10:00 |
honglang
|
ef109721fe
|
AP_HAL_ChibiOS: hwdef: reorder CUAV-X7 IMUs
adjust the sequence of IMU sensors to have good performance.
|
2021-07-20 16:10:50 +10:00 |
honglang
|
847ce3b311
|
AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088
|
2021-06-03 13:57:27 +10:00 |
CUAVcaijie
|
0ff38e1379
|
HAL_ChibiOS: CUAV ICM20649 on SPI6 bus replaced by ICM20689
alternative IMUs for Nora and X7
|
2021-06-02 10:49:55 +10:00 |
Andrew Tridgell
|
f93e2f6717
|
HAL_ChibiOS: enable 32k FRAM on H7 boards
|
2021-01-16 06:47:10 +11:00 |
Andrew Tridgell
|
96f7397099
|
HAL_ChibiOS: make PowerC primary power on CUAV-X7
CUAV considers the CAN power to be the main power for this board
|
2020-10-24 08:27:21 +11:00 |
Andrew Tridgell
|
418bd33c43
|
HAL_ChibiOS: fix CUAV-X7 power bits
|
2020-10-13 17:58:30 +11:00 |
Andrew Tridgell
|
32cdfddf12
|
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
much easier to understand
|
2020-04-28 10:32:23 +10:00 |
Andrew Tridgell
|
e8b2b52bae
|
HAL_ChibiOS: removed STM32_VDD from hwdef.dat
use default
|
2020-04-28 10:32:23 +10:00 |
Andrew Tridgell
|
4ec1717361
|
HAL_ChibiOS: enable IMU temp control on CUAV-X7
|
2020-04-23 09:05:52 +10:00 |
Andrew Tridgell
|
56b0dddb7c
|
HAL_ChibiOS: set IMU temp on CUAV-X7
|
2020-04-23 07:28:13 +10:00 |
Andrew Tridgell
|
5892e6421e
|
HAL_ChibiOS: enable DRDY on ADIS16470 on CUAV-X7
|
2020-04-23 07:28:13 +10:00 |
Andrew Tridgell
|
db4f1a1473
|
HAL_ChibiOS: enable ADIS16470 on SPI1
|
2020-04-13 15:26:02 +10:00 |
CUAVcaijie
|
942b2fd29f
|
HAL_ChibiOS: Added support for CUAV X7 flight controller
|
2020-04-13 15:26:02 +10:00 |