Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,665 Commits 71 Branches 509 Tags 789 MiB
Commit Graph

1315 Commits

Author SHA1 Message Date
Jason Short 225c63c06a Arducopter: Added note 2012-07-10 21:53:37 -07:00
Jason Short 492809098b Toy Mode: High Yaw default 2012-07-10 21:53:37 -07:00
Jason Short cf6082fc44 Arducopter : Force home alt to 0 2012-07-10 21:53:37 -07:00
Jason Short 46f292bcd8 Arducopter: CH7 Waypoint saving 
Saves the takeoff Waypoint as Home + new altitude rather than current location.
 2012-07-10 21:53:37 -07:00
Amilcar Lucas 8e14ebbc10 Merge the changes from APM_Camera branch into ArduCopter 
Conflicts:

	ArduCopter/Camera.pde
	ArduCopter/Parameters.pde
 2012-07-11 00:39:13 +02:00
Andrew Tridgell a643d2aa6b ACM: use get_distance_cm() not get_distance() 
this fixes a bug introduced in 28f2eb6b9
 2012-07-11 07:50:07 +10:00
Andrew Tridgell 9b6acf168e AHRS: added AHRS_GPS_GAIN parameter 
this allows control of how much GPS velocity information is used in
doing centripetal correction in DCM
 2012-07-10 16:22:48 +10:00
Jason Short 86cab799ed arducopter.pde 
Timer was set =0 at initialization.
 2012-07-09 13:13:32 -07:00
Jason Short ab603c7fcf Toy Mode Yaw Rate fix 2012-07-09 13:13:32 -07:00
Jason Short acfd263bab commands.pde RTL Alt 
fix to maintain current altitude of we are above our RTL alt for safety.
 2012-07-09 13:13:32 -07:00
Jason Short 9e796899e4 Airspeed patch: 
pre-calculated airspeed resistance pitches copter automatically to gain a certain speed allowing the speed controller to work off of a better set point - similar to Alt hold.
added param tilt_comp with a default of 54 which equals 19.5° of pitch to go 6m/s
upped Z and Y target speeds to int32_t for speed squared calculation
 2012-07-09 13:13:32 -07:00
Andreas M. Antonopoulos ba9b94851f ArduCopter: Copied parameter documentation from ArduPlane, where appropriate 2012-07-04 23:33:55 -07:00
Andrew Tridgell a71f567d28 MAVLink: climb_rate is in m/s 2012-07-05 13:20:26 +10:00
Andreas M. Antonopoulos a2e2bf69c6 parameter documentation to test auto build 2012-07-04 20:06:12 -07:00
Andrew Tridgell fe54329de2 MAVLink: remove MAVLink 0.9 protocol support 
this simplifies the code a lot. We're not going back to 1.0
 2012-07-05 13:00:46 +10:00
Adam M Rivera ddd069ad83 Camera.pde: Implemented gyro based camera stabilization to support continuous servo gimbals. 2012-07-04 21:08:03 -05:00
Adam M Rivera 278e215a21 Parameters: Added flag for camera pitch/roll servos (continuous or regular) 2012-07-04 21:06:21 -05:00
Andrew Tridgell 35b73b9d01 ACM: removed some Location functions which are now in AP_Math 2012-07-04 13:44:36 +10:00
Jason Short cc51d497c6 commands 
fixed logic bug to make a copter loiter after the mission is ended.
 2012-07-03 17:38:50 -07:00
Jason Short a143e7bef6 Config.h: 
decreased alt hold_P to .4
removed RTL_AUTO_LAND default
increased alt hold I
 2012-07-03 17:37:37 -07:00
Jason Short fcc38889b4 Navigation 
increased speed governor to get faster WP travel
added param for WP tilt - basically a precalculated I term for wind resistance.
 2012-07-03 17:34:50 -07:00
Jason Short 69fe7feb54 Params 
Added Tilt_Compensation to Params,
deprecated RTL_Land_Enabeled
RTL_Approach_alt is not int16_t, -1 means do noting. 0 means land, >1 means hover to that altitude after timeout.
 2012-07-03 17:33:03 -07:00
Jason Short 207497a840 Arducopter.pde: 
Added note about -1 to disable feature
Set RTL_Atl by default after reaching home in case we're at the wrong alt.
increased speed of Yaw rotation for WPs
 2012-07-03 17:21:46 -07:00
Jason Short 8a2df85ee8 commands_logic: Removed some old unused code 2012-07-03 17:19:19 -07:00
Jason Short 4a2e9b692d Config: increased WP distance to 2m but default, removed alt hold D: causing issues with APM1 noise. 2012-07-03 17:18:33 -07:00
Jason Short 2bc77c1020 Log.pde: formatting 2012-07-03 17:16:26 -07:00
Jason Short c20c04ed24 removed GPS ground speed calc - was causing some funny business during the transition. 2012-07-03 17:16:14 -07:00
Jason Short b2d932136a Toy Mode: Yaw performance update. 2012-07-03 17:14:54 -07:00
Jason Short 50d1ff56c5 Config.h : shortening the landing time to 10s 2012-07-02 17:52:38 -07:00
Jason Short 88428743b2 Toy Mode: removed virtual WP, copter now just goes into auto_loiter when not holding the sticks. 2012-07-02 17:52:38 -07:00
Jason Short 0aabd4efe2 Yaw mode: 
Improved hybrid Yaw mode:
- uses rate controller rather than as fast as possible
- waits 1.5 seconds before entering hold
- bounce free
 2012-07-01 13:40:12 -07:00
Jason Short bea1ab8810 System.pde - RTL 
removed Approach mode, fixed RTL to loiter until desired altitude is reached
 2012-07-01 13:40:12 -07:00
Jason Short 44e12c6d2d Parameters 
removed unused parameters for retro loiter
 2012-07-01 13:40:12 -07:00
Jason Short 42a321b76c GCS_Mavlink.pde 
removed Approach define
 2012-07-01 13:40:11 -07:00
Jason Short 95e1f05f82 defines.h 
removed Approach mode enumeration
 2012-07-01 13:40:11 -07:00
Jason Short 3fb268da96 read_control_switch 
Removed Prev_WP reference. unneeded.
 2012-07-01 13:40:11 -07:00
Jason Short 99d6a45948 Config.h 
Removed Approach delay redundancy - using land timer instead
Removed Retro loiter mode param
 2012-07-01 13:40:11 -07:00
Jason Short 059fea36aa RTL: Commands.pde 
When we are out of commands we land or Loiter at the RTL_Approach_altitude.
 2012-07-01 13:40:11 -07:00
Jason Short 9cd9dd168e RTL: Commands.pde 
Removed do_approach function - now redundant
 2012-07-01 13:40:11 -07:00
Jason Short e5fbcb629d Arducopter.pde_RTL: 
added a new RTL function that goes into Loiter, first, checks if we have reached RTL_Altitude, then enters WP mode to come home.
Removes Approach mode. Uses Auto_Approach value to decide if we should land or descend to a certain altitude
 2012-07-01 13:40:11 -07:00
Jason Short 8c8f44e6f7 Arducopter: enabled RTL_altitude, renamed function to be more accurate 2012-07-01 13:40:11 -07:00
Jason Short b199fb22a2 Added code for self centering throttle - disabled by default. 2012-07-01 13:40:11 -07:00
Andrew Tridgell e791cad9ef AnalogSource: convert analogRead() calls to the new API 
this should give us much better analog values, plus save a bunch of
CPU time
 2012-07-01 15:01:05 +10:00
rmackay9 9624f8c179 ArduCopter: updated STABILIZE_ROLL_I to 0.01 (was 0.1) as instructed by Marco 2012-06-30 19:26:14 +09:00
Jason Short 60cdbe771c Circle_WP distance check fix 2012-06-29 21:20:28 -07:00
Jason Short d448ea23e6 Commands.pde: increased bad WP distance check 2012-06-29 21:20:28 -07:00
Jason Short d893cde785 navigation.pde : Added a drag/velocity prediction filter for improved I term wind correction. 2012-06-29 21:20:28 -07:00
Jason Short 59181eab3d System.pde: Toy mode details for set_mode() 2012-06-29 21:20:28 -07:00
Jason Short 7178da3538 GCS_Mavlink: added notes to #if malink10 2012-06-29 21:20:28 -07:00
Jason Short 49243bc206 defines.h: Toy Mode defines for flight modes 2012-06-29 21:20:28 -07:00
Jason Short 40e0d88d12 Config.h: Optimizing Nav gains 2012-06-29 21:20:28 -07:00
Jason Short bcf6c03157 Attitude.pde: Toy mode logic 2012-06-29 21:20:27 -07:00
Jason Short 146a4b021f Arducopter.pde: Added Toy mode refinements 2012-06-29 21:20:27 -07:00
Jason Short eb06320559 Params: Added toy_yate_rate 2012-06-29 21:20:27 -07:00
Jason Short 57b75736ce Added Toy mode to navigation 2012-06-29 21:20:27 -07:00
Jason Short c830ab6ded Aeducopter.pde: Toy mode updates 2012-06-29 21:20:27 -07:00
Adam M Rivera d399143498 commands_process.pde: Bug fix 427. By default, the copter would land after an AUTO mission. Updated to check for valid approach altitude at end of mission. 2012-06-29 21:41:56 -05:00
Andrew Tridgell 1cb96e14a9 SITL: enable the SIM_* parameters in ArduCopter and ArduPlane 2012-06-29 15:10:52 +10:00
Adam M Rivera 44ce8fc4bc ArduCopter: Loiter Timer should have been set when the approach altitude was set. Previously, land had to be enabled before auto approach would work. 2012-06-28 20:34:53 -05:00
Andrew Tridgell 7883c4a545 ACM: ArduCopter updates for new compass interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell 7eb150a2f0 ACM: adapt the ArduCopter code for new barometer interface 2012-06-27 16:01:50 +10:00
Andrew Tridgell d71e82191f ACM: enable GPS in AHRS for ArduCopter 
this is an experiment in centripetal correction for multicopters
 2012-06-27 16:01:49 +10:00
Jason Short 57e4fabb57 Attitude.pde: Turned off boost_p for nav_throttle based on Testing feedback from Marco. 2012-06-26 10:39:42 -07:00
Jason Short 3fcd3100cc Added user editable define for Super simple radius 2012-06-26 10:38:46 -07:00
rmackay9 c034e38cbd ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float) 2012-06-26 22:50:17 +09:00
Jason Short 91cde15c27 Attitude.pde - Added small boost to alt hold for takeoff. 2012-06-25 23:12:19 -07:00
Jason Short 711bbeb6f3 GCS_Mavlink.pde : mav_nav only used in legacy Mavlink. 2012-06-25 23:08:25 -07:00
Jason Short 4a85c40f03 Added Toy Mode control 2012-06-25 23:08:25 -07:00
Jason Short 03879d9113 Added Toy Mode defines 2012-06-25 23:08:25 -07:00
Jason Short 4872880134 Arducopter.pde : Added Approach mode, added "Toy" mode fun code I'm playing with. 
Added landing code to make landing happen closer to home loc
Added check for distance to Loiter WP before overriding a new Loiter position.
Moved calc_loiter_pitch_roll() to 50 hz.
removed the nav_bearing var - not used with new crosstrack.
 2012-06-25 23:08:25 -07:00
Jason Short efc74a87aa commands.pde: fixed unit error for distance check 2012-06-25 23:06:28 -07:00
Jason Short 7a5347fb1f Config.h : New Gains based on testing, new Crosstrack gain. from 1.0 to .2 because of new algorithm 2012-06-25 23:06:28 -07:00
Jason Short 81c684664b GCS Mavlink.pde: change reference to nav_bearing to target_bearing. 2012-06-25 23:06:28 -07:00
Jason Short 50b3ef66a7 Navigation.pde : removed old cross tracking from Arduplane. Added new 2D cross tracking. Added use of GPS velocity when above 1.5m/s 2012-06-25 23:06:28 -07:00
Jason Short 2fdbbb87f2 inertia.pde: WIP don't fly with inertia enabled until FN. 2012-06-25 23:06:28 -07:00
Jason Short 900f169c44 Log.pde: removed nav_bearing reference and replaced with target_bearing ref 2012-06-25 23:06:28 -07:00
Andreas M. Antonopoulos 678b12af25 AC2.6: Fix battery calculation and scaling bug for MAV1.0, now same as ArduPlane 
http://code.google.com/p/arducopter/issues/detail?id=430
 2012-06-24 17:01:25 -07:00
Robert Lefebvre 7eae382a22 Open up constraint on Rate Yaw Output for all copters. 2012-06-22 10:06:01 -04:00
Jason Short 014f0f9a99 Config.h - returned low to original 120 2012-06-20 15:22:35 -07:00
Jason Short 95f3041d25 Parameters.h: throttle_min and throttle_max now have defaults from Config.h 2012-06-20 15:02:00 -07:00
Jason Short b8016dfe48 changed define to a param for throttle_min and throttle_max 2012-06-20 15:00:53 -07:00
Jason Short ef847eecbb changed define to param for throttle_min 2012-06-20 15:00:05 -07:00
Jason Short 8ef60f2d75 Added throttle_min as a user definable param 2012-06-20 14:58:34 -07:00
Jason Short 25a67c9953 lowered minimum throttle 2012-06-20 08:47:47 -07:00
Jason Short 0ccf5724aa Small fix to angle boost - increases by about 20% to deal with inefficiencies of non-downward thrust 2012-06-20 08:47:47 -07:00
Jason Short d7fab41234 decreased I term based on the tests last weekend in high winds 2012-06-20 08:47:47 -07:00
Jason Short a0978e06e5 Adjustments to the Inertial_nav 
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
 2012-06-20 08:47:47 -07:00
Andrew Tridgell 5525180814 MAVLink: make usage of MAVLink defines more consistent 2012-06-15 16:27:11 +10:00
rmackay9 6b16ca190f ArduCopter: updated firmware to simply 2.6 (i.e. removed Epsilon) ahead of the release 2012-06-15 00:42:59 +09:00
Jason Short e261c62e6b Inertial Nav disabled by default 2012-06-13 22:37:52 -07:00
Jason Short 6dc1e02f76 Inertial Control 
I added inertial navigation based on the simulator data. This is an option only available if you compile with Arduino and set
#define INERTIAL_NAV ENABLED
in the APM_Config.h file.

This has been tested for one real flight and did not crash my quad, but consider it very alpha. The quad may be unpredictable at first until the error correction fixes poorly calibrated accels. Be Careful.

Most of the real work is in the inertia file, but the error correction, new variable defines and calibration calls are sprinkled throughout.

The Log should record RAW messages with special debugging values.
 2012-06-13 22:34:45 -07:00
rmackay9 3618ac62e0 ArduCopter: made Robert's new yaw method optional (off by default). 
Add this line to APM_Config.h to enable Robert's yaw
#define ALTERNATIVE_YAW_MODE ENABLED
 2012-06-13 21:50:16 +09:00
Jason Short ee78818f5a Raised the Max throttle to 1000, min to 200. Worked good in SIM with Tridge's motor safety patch. 2012-06-12 13:58:49 -07:00
rmackay9 c9093a1609 ArduCopter: updated firmware version to 2.6 Epsilon 2012-06-12 23:22:57 +09:00
rmackay9 1b9ed1444e ArduCopter: updated standard loiter pids. 
Loiter_P (speed from distance to target) = 0.2 (was 0.35)
Loiter_Rate_P (lean angle from desired acceleration) = 2.4 (was 2.5)
Loiter_Rate_I = unchanged at 0.08
Loiter_Rate_D = 0.40 (was 0.45)
 2012-06-12 20:56:31 +09:00
Jason Short ebff84d41e Added Angel's name to contrib list 2012-06-10 12:38:22 -07:00
Andrew Tridgell 8f1121c980 GPS: Use appropiate GPS_ENGINE settings in APM, ACM and rover 2012-06-10 16:36:18 +10:00
rmackay9 df72f70aba ArduCopter: updated firmware version to 2.6 Delta ahead of the next round of testing (and hopefully soon a release) 2012-06-08 21:54:09 +09:00
Andrew Tridgell bfb2c1ee87 GPS: open the GPS serial port with a 256 byte buffer 
the UBLOX needs more than 128 bytes for reliable parsing
 2012-06-08 16:42:03 +10:00
Robert Lefebvre 3e6f37d540 Opening up the Yaw Rate constraint for Trad Heli. 2012-06-07 22:40:25 -04:00