Commit Graph

15227 Commits

Author SHA1 Message Date
Leonard Hall 7de5bccc93 AC_PosControl: remove THR_HOVER parameter
Parameter is set by main code so no need to store to eeprom
2015-03-06 14:02:46 +09:00
Leonard Hall 9866eaded1 AC_PosControl: rename p_alt_pos to p_pos_z
Also pid_alt_accel to pid_accel_z
2015-03-06 14:02:44 +09:00
Leonard Hall 349f1aeceb AC_PosControl: use 2-axis PI controller 2015-03-06 14:02:42 +09:00
Leonard Hall 8d4f0ec80c AC_PosControl: integrate PID input filter 2015-03-06 14:02:39 +09:00
Randy Mackay e4d48fdc92 AC_AttControlHeli: separate accel max for roll, pitch
renamed _accel_y_max to _accel_yaw_max
2015-03-06 14:02:36 +09:00
Leonard Hall 51455af51a AC_AttConHeli: integrate PID input filter 2015-03-06 14:02:35 +09:00
Leonard Hall 792b2a2eb3 AC_AttControl: separate accel max for roll, pitch, yaw
Also add:
Rate filters
rename rate filter defines
d-term only filter for roll, pitch rate control
accessors to save max accel for roll, pitch, yaw
fix for duplicate ACCEL_Y_MAX param
2015-03-06 14:02:33 +09:00
Leonard Hall 9833c91b2b AC_AttControl: get_max_rate_step_bf_roll, pitch and yaw 2015-03-06 14:02:30 +09:00
Leonard Hall f00025e5c9 AC_AttControl: accessor for rate feedforward 2015-03-06 14:02:27 +09:00
Leonard Hall 691fb8947e AC_AttControl: accessor for rate_bf_targets 2015-03-06 14:02:25 +09:00
Leonard Hall 784a4ce51a AC_AttControl: increase max angle overshoot to 30deg 2015-03-06 14:02:23 +09:00
Leonard Hall eb084f7c58 AC_AttControl: bf yaw control uses input filtered PID 2015-03-06 14:02:21 +09:00
Leonard Hall d5bbe6de03 Copter: remove TRIM_THROTTLE
throttle_trim is replaced by throttle_average which is initialised to
the throttle_mid parameter value at startup
2015-03-06 14:02:19 +09:00
Leonard Hall c78480e14f Copter: rename loiter_pos to pos_xy
Also renamed throttle_rate to vel_z, throttle_accel to accel_z
2015-03-06 14:02:17 +09:00
Leonard Hall e232867661 Copter: move LOITER_RATE to 2-axis PI controller
Also rename LOITER_RATE to VEL_XY for parameters, definitions, variables
2015-03-06 14:02:15 +09:00
Leonard Hall 1ec5eedd23 Copter: ch6 tuning of yaw rate filter 2015-03-06 14:02:13 +09:00
Leonard Hall 2b0fb45fe8 Copter: integrate PID input filter 2015-03-06 14:02:11 +09:00
Leonard Hall d233ca3133 Copter: add Time and rate_target to AutoTune logging 2015-03-06 14:02:09 +09:00
Leonard Hall 8ba195a3a2 Copter: add Mot and Rate dataflash logging 2015-03-06 14:02:07 +09:00
Leonard Hall 1ebf2c40f5 Copter: Autotune rewrite
Includes the following:
Increase Autotune Limits
Low Rate_P_Max prevents correct Rate_D prediction.
make adjustment proportional
increase the maximum value of Rate_P
adjustment for zero overshoot
Speed up autotune
Reduce D bounce back requirement
adapt matthewlloyd's switching
Includes many enhancements to the basic code but doesn't bring in his
speed up ideas
Reduce Stab P down
Add Calibration
Repeat side to increase speed
Update Autotune PI ratios
fixup comments
autotune incorporate aggressiveness parameter
sets max accel for roll, pitch, yaw
Update accel calc and set Yaw D to zero
Calculate Accel correctly on SP Limit
Send saved gains msg to GCS
updates PID filter
increase accel backoff
save max accel if rate feedfwd enabled
keep stabilizing
2015-03-06 14:02:04 +09:00
Leonard Hall a9a6e8856b Copter: add AUTOTUNE_AGGR parameter 2015-03-06 14:02:02 +09:00
Leonard Hall 864168e5ea Copter: add AUTOTUNE_AXES bitmask parameter
This is used to allow tuning just some axis
2015-03-06 14:02:01 +09:00
Leonard Hall 11a19803e0 Motors: add accessors for motor logging
accessor include get_roll, get_pitch, get_yaw, throttle input
2015-03-06 14:01:58 +09:00
Leonard Hall 34a5bc8b33 AC_PI_2D: 2-axis PI controller 2015-03-06 14:01:56 +09:00
Leonard Hall 046949ea8a AC_HELI_PID: add input filter and restructure
Also removed unused initial_ff from construtor
2015-03-06 14:01:54 +09:00
Leonard Hall 517448e536 AC_PID: add input filtering and restructure 2015-03-06 14:01:52 +09:00
Andrew Tridgell 644d0c223a PX4: update FMUv2 bootloader
this one adds the CHIP command so we can differentiate rev3 silicon
2015-03-05 22:12:08 +11:00
Kevin Hester 76f1088ec6 Vagrant: bash gets confused if you pass in .sh files from windows
This change prevents git from adding carriage returns to .sh files
2015-03-05 12:50:19 +11:00
Andrew Tridgell 2aae594371 GCS_MAVLink: handle serial loopback in routing 2015-03-04 20:24:11 +11:00
Andrew Tridgell 086f878bdc HAL_PX4: split IO thread into separate IO and storage threads
this prevents a blocked microSD card from blocking IO to the FRAM,
causing parameter changes not to be sticky
2015-03-04 20:18:17 +11:00
Andrew Tridgell 58c92b0158 GCS_MAVLink: added SCALED_IMU3 logging 2015-03-04 19:30:08 +11:00
Andrew Tridgell 79be500e04 GCS_MAVLink: re-generate headers 2015-03-04 19:29:28 +11:00
Andrew Tridgell eeacbe518b GCS_MAVLink: update from upstream XML 2015-03-04 19:21:24 +11:00
Grant Morphett e0f828f4d2 APMrover2: Creating release 2.49 of Rover. 2015-03-04 11:48:47 +11:00
Marco Walther 339dac18f7 Rover: Fix the yellow binking lights after the AP_Notify updates 2015-03-04 09:03:49 +11:00
Marco Walther 8629637cec Rover: Fix for a minor sonar problem 2015-03-04 09:03:49 +11:00
Randy Mackay f5f7cd540f Motors: fix example sketches 2015-03-03 21:39:24 +09:00
Leonard Hall cf8c211c35 Motors: fix thrust curve and add constraint 2015-03-03 15:49:07 +09:00
Leonard Hall 3e960dfc3b Motors: add get_voltage_comp_gain
This clarifies that lift_max is the inverse of the battery voltage gain
compensation
2015-03-03 15:49:04 +09:00
Leonard Hall 997c6f0868 Motors: move battery resistance calcs to parent
Moving from MotorsMatrix to parent Motors class allows these to be used
from other frame types
Also initialise battery resistance
2015-03-03 15:49:02 +09:00
Randy Mackay 09d7cdbc23 Motors: batt_voltage_filt becomes filter object 2015-03-03 15:49:00 +09:00
Randy Mackay 4b78b2ce80 Filter: add get method to LowPassFilter 2015-03-03 15:48:58 +09:00
Randy Mackay c711179ffe Copter: set_mid_throttle renamed to set_hover_throttle 2015-03-03 15:48:56 +09:00
Leonard Hall 529c6fed3a Motors: move over current throttle limiting to parent
Moving from MotorsMatrix to parent Motors class allows this to be used
from other frame types
2015-03-03 15:48:54 +09:00
Randy Mackay 812473fd9a MotorsMatrix: use get_hover_throttle_as_pwm 2015-03-03 15:48:52 +09:00
Randy Mackay 1a9d3125ef Motors: _hover_out to pct * 10 instead of pwm 2015-03-03 15:48:50 +09:00
Leonard Hall 6b7bdf64bd Motors: move batt voltage lift_max calcs to parent
Moving from MotorsMatrix to parent Motors class allows them to be used
by other frame types
Also added sanity check of batt_voltage_min
2015-03-03 15:48:48 +09:00
Randy Mackay c549b58eb7 MotorsMatrix: remove check of throttle_curve_enabled 2015-03-03 15:48:46 +09:00
Randy Mackay 5fb3de48ee MotorsTri, Single, Coax: use new thrust curve 2015-03-03 15:48:44 +09:00
Randy Mackay 2eaa4a8445 Motors: remove old throttle curve 2015-03-03 15:48:42 +09:00