Jason Short
57e4fabb57
Attitude.pde: Turned off boost_p for nav_throttle based on Testing feedback from Marco.
2012-06-26 10:39:42 -07:00
Jason Short
3fcd3100cc
Added user editable define for Super simple radius
2012-06-26 10:38:46 -07:00
rmackay9
74d37a3713
ArduPlane HIL: fixed bug so g_gps->setHil calls send time as a uint32_t (was sending a float but was cast back to an uint32_t resulting in a meaningless time that never changed).
2012-06-26 22:59:24 +09:00
rmackay9
c034e38cbd
ArduCopter HIL: changed calls to setHIL to send in time as a uint32_t (it was a float)
2012-06-26 22:50:17 +09:00
Jason Short
91cde15c27
Attitude.pde - Added small boost to alt hold for takeoff.
2012-06-25 23:12:19 -07:00
Jason Short
711bbeb6f3
GCS_Mavlink.pde : mav_nav only used in legacy Mavlink.
2012-06-25 23:08:25 -07:00
Jason Short
4a85c40f03
Added Toy Mode control
2012-06-25 23:08:25 -07:00
Jason Short
03879d9113
Added Toy Mode defines
2012-06-25 23:08:25 -07:00
Jason Short
4872880134
Arducopter.pde : Added Approach mode, added "Toy" mode fun code I'm playing with.
...
Added landing code to make landing happen closer to home loc
Added check for distance to Loiter WP before overriding a new Loiter position.
Moved calc_loiter_pitch_roll() to 50 hz.
removed the nav_bearing var - not used with new crosstrack.
2012-06-25 23:08:25 -07:00
Jason Short
efc74a87aa
commands.pde: fixed unit error for distance check
2012-06-25 23:06:28 -07:00
Jason Short
7a5347fb1f
Config.h : New Gains based on testing, new Crosstrack gain. from 1.0 to .2 because of new algorithm
2012-06-25 23:06:28 -07:00
Jason Short
81c684664b
GCS Mavlink.pde: change reference to nav_bearing to target_bearing.
2012-06-25 23:06:28 -07:00
Jason Short
50b3ef66a7
Navigation.pde : removed old cross tracking from Arduplane. Added new 2D cross tracking. Added use of GPS velocity when above 1.5m/s
2012-06-25 23:06:28 -07:00
Jason Short
2fdbbb87f2
inertia.pde: WIP don't fly with inertia enabled until FN.
2012-06-25 23:06:28 -07:00
Jason Short
900f169c44
Log.pde: removed nav_bearing reference and replaced with target_bearing ref
2012-06-25 23:06:28 -07:00
Andreas M. Antonopoulos
678b12af25
AC2.6: Fix battery calculation and scaling bug for MAV1.0, now same as ArduPlane
...
http://code.google.com/p/arducopter/issues/detail?id=430
2012-06-24 17:01:25 -07:00
Robert Lefebvre
7eae382a22
Open up constraint on Rate Yaw Output for all copters.
2012-06-22 10:06:01 -04:00
Jason Short
abb6eb2471
Added a crude Lead Filter. Needs some fine tuning, lag specification, scaling. Works great on 4hz GPS such as Mtek.
2012-06-21 11:14:20 -07:00
Jean-Louis Naudin
94ccdea145
APMrover 2.20b: minor update for HIL mode with the new lib
...
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-06-21 08:10:33 +02:00
Amilcar Lucas
cd0411ba33
Add linebreaks to increase readability.
2012-06-21 00:36:10 +02:00
Jason Short
014f0f9a99
Config.h - returned low to original 120
2012-06-20 15:22:35 -07:00
Amilcar Lucas
9c7fdd742c
Merge branch 'master' of https://code.google.com/p/ardupilot-mega
2012-06-21 00:21:55 +02:00
Amilcar Lucas
be6923be0f
Improve parameters descriptive text
2012-06-21 00:20:37 +02:00
Jason Short
95f3041d25
Parameters.h: throttle_min and throttle_max now have defaults from Config.h
2012-06-20 15:02:00 -07:00
Jason Short
b8016dfe48
changed define to a param for throttle_min and throttle_max
2012-06-20 15:00:53 -07:00
Jason Short
ef847eecbb
changed define to param for throttle_min
2012-06-20 15:00:05 -07:00
Jason Short
8ef60f2d75
Added throttle_min as a user definable param
2012-06-20 14:58:34 -07:00
Jason Short
25a67c9953
lowered minimum throttle
2012-06-20 08:47:47 -07:00
Jason Short
0ccf5724aa
Small fix to angle boost - increases by about 20% to deal with inefficiencies of non-downward thrust
2012-06-20 08:47:47 -07:00
Jason Short
d7fab41234
decreased I term based on the tests last weekend in high winds
2012-06-20 08:47:47 -07:00
Jason Short
a0978e06e5
Adjustments to the Inertial_nav
...
lowered Rate_I and Rate_P to be less jumpy. raised throttle_p
added a clear to rate when entering loiter
moved the raw reporting
2012-06-20 08:47:47 -07:00
Michael Oborne
b9bf84c7af
APM Planner 1.1.93
...
fix armed/disarmed message
2012-06-19 07:15:40 -07:00
Amilcar Lucas
1ead5f1690
Documentation improvements, no functional changes (only comments)
2012-06-17 22:53:54 +02:00
Amilcar Lucas
8f646467e5
Move local temp variables to the stack it saves 1952 bytes
...
Add function comments
Only use _ on class member variables
Only point to a 3D GPS point if GPS has a fix
Implement MAV_MOUNT_MODE_MAVLINK_TARGETING
2012-06-17 22:25:51 +02:00
Michael Oborne
7bf40bde07
firmware build
2012-06-16 13:10:37 +08:00
Andrew Tridgell
7941abad16
APM: prepare for 2.40 release
2012-06-16 10:11:26 +10:00
Andrew Tridgell
0c7e20fe90
autotest: show logs on timeout
2012-06-16 06:47:55 +10:00
Andrew Tridgell
860c88c786
autotest: try again to get paths right!
2012-06-15 18:44:00 +10:00
Wingspinner
d9e6a1ece9
Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality
2012-06-15 08:40:14 +00:00
Wingspinner
ceba24ff8f
Added support for channel curves (and expo) to AP_RC_Channel class. Also updated AP_RC_Channel example/test to demonstrate and test new functionality
2012-06-15 08:38:52 +00:00
Andrew Tridgell
f3a45bfb41
autotest: added --timeout option
...
try to ensure we end up with a timeout display on the website
2012-06-15 16:53:51 +10:00
Andrew Tridgell
5525180814
MAVLink: make usage of MAVLink defines more consistent
2012-06-15 16:27:11 +10:00
Andrew Tridgell
957d818eb7
test: it is no longer possible to build with MAVLink 0.9
...
the Camera and Mount code make it impossible because of the incredibly
silly arduino cpp handling.
2012-06-15 16:27:11 +10:00
Andrew Tridgell
b32726e867
GPS: need pgmspace.h for _write_progstr_block()
2012-06-15 16:27:11 +10:00
Andrew Tridgell
ae9883a8e2
GPS: fixed auto-config of UBlox setup with no UBX messages
...
if a UBlox is configured for NMEA only, with no UBX messages at all
then it would never trigger the GPS_AUTO detection. This adds a UBX
config message to the init strings that enables the NAV_SOL message
2012-06-15 15:53:27 +10:00
Andrew Tridgell
b7e807cd58
FastSerial: added tx_pending() method
...
this allows the caller to wait for the tx buffer to drain
2012-06-15 15:53:27 +10:00
Andrew Tridgell
d4056213ad
APM: parameter enums should not be conditionally compiled
2012-06-15 11:57:00 +10:00
Andrew Tridgell
3a9096aa41
APM: added longer comment on k_format_version
2012-06-15 11:55:09 +10:00
Michael Oborne
3b07f8c06a
firmware build
2012-06-15 08:25:19 +08:00
Michael Oborne
db2c255611
firmware build
2012-06-15 08:19:32 +08:00