Commit Graph

53990 Commits

Author SHA1 Message Date
Leonard Hall 7dd196c7ea Guided Mode support MAV_CMD_DO_CHANGE_SPEED 2022-08-02 10:26:58 +10:00
Henry Wurzburg 530d59017a AP_Logger: add increment on file rate limiting to allow <1Hz 2022-08-02 10:22:48 +10:00
Henry Wurzburg b7f49db1f7 AP_NavEKF3: Add streaming log verbosity level parameter 2022-08-02 10:21:39 +10:00
Henry Wurzburg 022987e4d3 RC_Channel: add AUX switch to pause logging of streamed entries 2022-08-02 10:15:08 +10:00
Henry Wurzburg a395b3d2a8 AP_Logger: add AUX switch to pause logging of streamed entries 2022-08-02 10:15:08 +10:00
Andrew Tridgell f9f0f60815 Plane: base yaw in overshoot on target speed not scaled speed
this prevents an oscillating due to the speed changing as we yaw,
resulting in a different yaw target
2022-08-02 07:49:34 +10:00
Andrew Tridgell 1d34ac4e05 Tools: adjust Dalby mission for VTOL_LAND distance 2022-08-02 07:49:34 +10:00
Andrew Tridgell 3201ecd381 Plane: added an arming check for VTOL land too short
this is meant to catch bad mission setup, especially for UGCS, which
planes waypoints right on top of the landing point
2022-08-02 07:49:34 +10:00
Andrew Tridgell 0ededd7c62 AP_AHRS: use wind from simulation if available with EKF type 10 2022-08-02 07:49:34 +10:00
Andrew Tridgell 8cc5172ff3 SITL: fill in wind from flightaxis 2022-08-02 07:49:34 +10:00
Andrew Tridgell 5bdd43457c Plane: in overshoot allow up to the Q WP speed
this prevents us using too much battery when we are a long way from
the landing point
2022-08-02 07:49:34 +10:00
Andrew Tridgell fa371b92a8 Plane: limit target accel in POSITION1
don't ask for more than 2* transition limit, and reset when we enter
overshoot case
2022-08-02 07:49:34 +10:00
Andrew Tridgell afd21298d5 Plane: adjust target vector for wind in overshoot
at low speeds we want to keep the nose pointed into the wind on
landings
2022-08-02 07:49:34 +10:00
Andrew Tridgell a1e7072cb1 Plane: cope with overshoot in POSITION1 VTOL land state
when we overshoot run a simple position controller that tries to point
the nose at the landing point and aims for the position2 speed
threshold
2022-08-02 07:49:34 +10:00
Peter Barker f57e3668e3 autotest: do no drain mav (i.e. pause sitl) while delaying for sim time 2022-07-29 11:15:59 +10:00
Peter Barker aeb24d4978 AP_AHRS: remove method casting active EKF type for logging
logging is now done internally
2022-07-29 11:05:19 +10:00
Peter Barker 1c78baac72 autotest: fix Copter PrecisionLoiterCompanion 2022-07-28 21:06:18 +10:00
Peter Barker 35d60d8025 autotest: augment PayLoadPlaceMission test to check drop distance 2022-07-28 21:06:18 +10:00
Peter Barker f67877655b autotest: tidy payload place test 2022-07-28 21:06:18 +10:00
Iampete1 7683b36e3b SITL: set compass vector after loading defualts 2022-07-28 16:51:33 +10:00
Iampete1 fcab0c70a2 AP_Param: allow init of all Vector3f values to single float 2022-07-28 16:51:33 +10:00
Iampete1 98d9f07507 AP_InertialSensor: defualt accel scale vector to 1.0 2022-07-28 16:51:33 +10:00
Iampete1 cdf930effe AP_Compass: defualt diagonals vector to 1.0 2022-07-28 16:51:33 +10:00
Peter Barker 82bc2a7d85 autotest: adjust Plane EKF check for new configured-backend check 2022-07-28 15:53:13 +10:00
Peter Barker e89f4ea599 AP_Arming: add prearm check that we are using configured AHRS type 2022-07-28 15:53:13 +10:00
Peter Barker 4909866dd9 AP_AHRS: add prearm check that we are using configured AHRS type 2022-07-28 15:53:13 +10:00
Leonard Hall 1e87b4b09a Copter: Fix Payload Place Bug 2022-07-28 15:24:54 +10:00
Andy Piper 022ae00199 autotest: att attempts to DataFlashErase test 2022-07-28 08:55:01 +10:00
Peter Barker b7a3038996 Tools: add script to extract features supported by a firmware 2022-07-27 09:23:06 -07:00
Iampete1 e397749946 Tools: build options: add fence 2022-07-27 19:04:56 +10:00
Iampete1 2fc9cf97d4 AC_Fence: defualt to AP_FENCE_ENABLED 2, 1 disables dummy methods 2022-07-27 19:04:56 +10:00
Iampete1 68e29f02a1 Tools: build options: add AC_AVOID 2022-07-27 19:04:56 +10:00
Iampete1 955f1fd1cd Tools: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 9d4d0c10eb Rover: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 cf1e1b2969 ArduSub: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 a592f76282 ArduPlane: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 1b160205ab ArduCopter: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 bab866268f RC_Channel: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 31bc6d9ec4 GCS_MAVLink: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 a9310c3d18 AP_Vehicle: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 ed330fd026 AP_Proximity: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 94004db13f AP_OSD: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 380d174e32 AP_Landing: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 ad59c62899 AP_Frsky_Telem: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 19ccf53fa6 AP_Filesystem: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 58d244d7a3 AP_Arming: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 4b6a0f0b4f AC_Fence: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 5f31818658 AC_Avoidance: change AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 9dc318f0cc AC_Fence: move to config file and rename from AC_FENCE to AP_FENCE_ENABLED 2022-07-27 19:04:56 +10:00
Iampete1 1342fa4851 AP_Proximity: fix complation without fence 2022-07-27 19:04:56 +10:00