Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
7,403 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

563 Commits

Author SHA1 Message Date
Andrew Tridgell d11dde578f Copter: a useful bit of timing debug code 
enable when looking at main loop timing
 2013-01-07 11:07:44 +11:00
Andrew Tridgell d952ccf968 Copter: added main_loop_ready() function 
this tells us when the main loop is ready to run. MAVLink won't send a
message if the main loop could run.
 2013-01-07 11:07:34 +11:00
Andrew Tridgell c48714be16 Copter: enabled PX4 sensors 2013-01-05 20:39:31 +11:00
James Bielman 264db3670e AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C. 
- Update ArduCopter and ArduPlane modules to pass the correct serial
  driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
 2013-01-03 13:48:06 -08:00
Andrew Tridgell 94e3322e24 Copter: fixed build on px4 2013-01-02 22:09:02 +11:00
Andrew Tridgell e56a7eacec Copter: don't pass board version to motors 2013-01-02 15:28:34 +11:00
Andrew Tridgell ead38f917f Copter: use GRAVITY_MSS 2013-01-02 14:45:08 +11:00
rmackay9 228ad2198f ArduCopter: update firmware version to 2.9-rc2 2013-01-02 09:55:37 +11:00
rmackay9 677b38a48e ArduCopter: first implementation of surface tracking using sonar 
Note: not yet enabled as part of any flight mode
 2013-01-02 09:55:37 +11:00
rmackay9 68b62abd38 ArduCopter with the new Camera and Relay classes for APM1 and APM2. 
All changes by Sandro Benigno
 2013-01-02 09:55:37 +11:00
rmackay9 e850ab7ccd ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes 2013-01-02 09:24:31 +11:00
Craig@3DR 0ed25cf719 Global change all references from 
GPS_PROTOCOL_MTK16
to
GPS_PROTOCOL_MTK19
 2013-01-02 09:24:31 +11:00
rmackay9 466097b383 ArduCopter: use inertial nav for current altitude and climb rate 2013-01-02 09:22:51 +11:00
rmackay9 5ba363b007 ArduCopter: move gcs_check function (which sends to ground station) to run when 50hz loop is not running 
Also removed redundant heartbeat message
 2013-01-02 09:21:35 +11:00
rmackay9 bd0e018ca0 ArduCopter: restore auto-trim method but now use AHRS.add_trim 2013-01-02 09:20:08 +11:00
Robert Lefebvre 6e64b1b357 ACM: Precision Loiter RePositioning code. 
Protected behind a #define
 2013-01-02 09:19:39 +11:00
rmackay9 e6519330f4 ArduCopter: remove unused rc_override variables to save 21 bytes 2013-01-02 09:19:17 +11:00
rmackay9 ac8af9a53f ArduCopter: Leonard Hall's changes to alt hold including adding low pass filter to climb rate 
get_throttle_rate_stabilized changed to simply update the target altitude instead of talking directly to the rate controller.
get_throttle_althold changed to use sqrt of distance when calculating the desired rate towards the target altitude.
added reset of accel based throttle PID's I term.
unrelated small bug fix from Randy to allow CH6 tuning of throttle rate D term.
 2013-01-02 09:19:17 +11:00
rmackay9 d926360e81 ArduCopter: move gcs updates to run only when there are 4ms of spare time before the next 100hz iteration starts 2013-01-02 09:14:31 +11:00
rmackay9 6da68c53a5 ArduCopter: bug fix so AP_Limits does not use up memory if it is disabled 2013-01-02 09:13:42 +11:00
rmackay9 5633164fa0 ArduCopter: bug fix for compass.accumulate check in main loop (millis vs micros issue) 2013-01-02 09:12:40 +11:00
rmackay9 8e032b89ee ArduCopter: create 2.9 branch and update firmware version 2013-01-02 09:10:40 +11:00
Andrew Tridgell 06357c40f2 Copter: use new functions 2012-12-20 14:53:22 +11:00
Andrew Tridgell a02f723f3a Copter: fixed HIL builds 2012-12-20 14:52:37 +11:00
Andrew Tridgell 9e986801c9 Copter: fixed SITL for ArduCopter 2012-12-20 14:52:34 +11:00
Andrew Tridgell 08b1c2d590 Copter: fixed GPS init 2012-12-20 14:52:33 +11:00
Pat Hickey d5d97be837 ArduCopter: add param loader properly implement parameters 
* thanks tridge!
 2012-12-20 14:52:29 +11:00
Pat Hickey 5e63491994 ArduCopter: fix issues with HAL/HIL mixup and baro/compass instances 2012-12-20 14:52:29 +11:00
Pat Hickey 21d0da84a6 ArduCopter: temporarily disable AP_Param::setup_sketch_results 
* rebased away tridge's AP_Param changes as they seemed possibly buggy?
 2012-12-20 14:52:29 +11:00
Pat Hickey a0151aa66c ArduCopter: fix cliSerial null ptr, do AP_Param::setup_sketch_defaults 
* plus make SITL DataFlash available.
 2012-12-20 14:52:29 +11:00
Pat Hickey 2aa4657315 ArduCopter: changes to use CONFIG_HIL_BOARD 2012-12-20 14:52:28 +11:00
Pat Hickey ade7099d75 ArduCopter: add AP_HAL_MAIN 2012-12-20 14:52:28 +11:00
Pat Hickey 5bd7046a95 ArduCopter: sketch cpp builds! 2012-12-20 14:52:28 +11:00
Pat Hickey 7af03127f6 ArduCopter: more work 2012-12-20 14:52:28 +11:00
Pat Hickey 70f4739522 ArduCopter: more fixes 2012-12-20 14:52:28 +11:00
Pat Hickey f281d9265e ArduCopter: reworked sonar analog source creation 2012-12-20 14:52:28 +11:00
Pat Hickey d9e0bbbbab ArduCopter: first pass at AP_HAL porting 
* changed all the byte types to uint8_t
* fixed up much of the serial stuff
 2012-12-20 14:52:27 +11:00
Pat Hickey a4f1f6a5db AP_Progmem: fix dependencies for all sketches touched by AP_HAL_AVR 2012-12-20 14:51:28 +11:00
Pat Hickey 3f1d9d7f69 AP_Param: #include <AP_Param.h> fixups for libraries & sketches 
* I mostly went through with grep and added an #include <AP_Param.h> below
  every #include <AP_Common.h>. Not all of these example sketches might
  strictly need AP_Param.
 2012-12-20 14:51:19 +11:00
Jason Short 19ae5c30eb ACM : Formatting 2012-12-13 20:12:39 -08:00
rmackay9 047f848cc7 ArduCopter: remove ThirdOrderCompFilter from list of includes 2012-12-10 09:14:44 +09:00
rmackay9 0f7bb79d89 ArduCopter: add comments to tuning parameters. 
Use RC_CHANNEL types as defined by RC_Channel library.
Remove unused definitions.
 2012-12-09 16:44:42 +09:00
rmackay9 8c2423f618 ArduCopter: code clean-up. Changed update_nav_wp to use a switch statement and relocated to navigation.pde 2012-12-09 15:24:19 +09:00
rmackay9 b4e5176e2a ArduCopter, AP_InertialSensor: restore mpu6k sample rate to 200hz but keep default filtering at 42hz. 2012-12-09 14:27:33 +09:00
Robert Lefebvre 0eb57bf93d ACM: TradHeli 
Fix to make update_throttle_cruise work with stab_throttle scaling.
 2012-12-08 15:12:39 -05:00
rmackay9 9dd978576b ArduCopter: auto yaw changes to allow pilot override of yaw during missions 
Added set_yaw_mode to better control of yaw controller changes and variable initialisation.
Replaced AUTO_YAW mode with separate yaw controllers YAW_LOOK_AT_NEXT_WP, YAW_LOOK_AT_LOCATION, YAW_LOOK_AT_HEADING.
Pilot manual override of yaw causes yaw to change to YAW_HOLD (i.e. manual yaw) until next waypoint is reached.
Added get_yaw_slew function to control how quickly autopilot turns copter
Changed YAW_LOOK_AHEAD to use GPS heading and moved to new get_look_ahead_yaw function in Attitude.pde
Renamed variables: target_bearing->wp_bearing, original_target_bearing->original_wp_bearing.
Removed auto_yaw_tracking and auto_yaw variables and update_auto_yaw function as they are no longer needed.
Simplified MAV_CMD_CONDITION_YAW handling (do_yaw).  We lose ability to control direction of turn and ability to do long panorama shots but it now works between waypoints and save 20bytes.
 2012-12-08 14:23:32 +09:00
rmackay9 99b32a39c4 ArduCopter: InertialNav time constant CH6 tuning changed to only update enabled axis 2012-12-07 13:01:40 +09:00
rmackay9 39d524212f ArduCopter: allow accel based throttle controller to be enabled/disabled with the new THR_ACC_ENABLE parameter. 
When disabled the original velocity based throttle controller is used.
 2012-12-06 10:31:57 +09:00
rmackay9 a5bb54e36e ArduCopter: RTL clean-up and slightly improved landing sensor 
Consolidated RTL state to be captured by rtl_state variable.
Combined update_RTL_Nav and verify_RTL functions which performed the same function but one was for missions, the other for the RTL flight mode.
Renamed some RTL parameters and global variables to have RTL at the front.
Landing detector now checks accel-throttle's I term and/or a very low throttle value
 2012-12-06 10:31:52 +09:00
rmackay9 072ffec493 ArduCopter: allow INERTIAL_NAV to be enabled separately for horizontal and vertical position 2012-12-06 10:31:41 +09:00
rmackay9 d7f76ebd87 ArduCopter: add tuning of throttle rate controller's I term (THROTTLE_KI) 2012-12-06 10:31:25 +09:00
rmackay9 7b4ed2d227 ArduCopter: restored landing detector to landing throttle mode. 
Added LAND_SPEED parameter to control the rate of descent for the last 10m of a landing.
Added CH6 tuning for accel based throttle controller.
 2012-12-06 10:31:20 +09:00
rmackay9 a94826f182 ArduCopter: add set_throttle_mode to better control initialisation of variables 2012-12-06 10:31:04 +09:00
rmackay9 1036b35128 ArduCopter: added back in angle boost and recombined for heli and multicopter 2012-12-06 10:30:55 +09:00
rmackay9 3cbef57c64 ArduCopter: first merge of leonard's accel based altitude controller plus other changes from Randy 
Changes include:
New low-level get_throttle_accel function takes target acceleration and compares vs earth-frame Z accelerometer values to produce output to motors.
Higher level throttle controllers modified to call new get_throttle_accel controller
Throttle_rate_stabilized controller added which maintains a desired climb/descent rate
Throttle_land controller added - descends using normal auto throttle controller to 10m then descends at 50cm/s
Multiple throttle modes added including landing mode
Land flight mode no longer needs GPS
Throttle cruise maintenance moved to update_throttle_cruise function
 2012-12-06 10:30:49 +09:00
Robert Lefebvre 1d589c0b7d ACM: TradHeli 
Fixes for Attitude rate controllers.
 2012-12-04 14:42:04 -05:00
Robert Lefebvre 315a7e8000 ACM: Yaw Look Ahead Changes 2012-12-04 13:26:41 -05:00
Robert Lefebvre 9130045298 ACM: Code Cleanup 2012-11-30 17:05:12 -05:00
rmackay9 8141f0b600 ArduCopter: bug fix - increase mpu6k sample rate to 100hz 2012-11-30 23:49:18 +09:00
Andrew Tridgell 6fbf5ec8f2 Copter: update ArduCopter for new ins interface 2012-11-30 07:15:18 +11:00
Robert Lefebvre 07d7d90882 ACM: TradHeli 
Bringing in Low Pass Filter for Rate Controllers
 2012-11-26 21:51:23 -05:00
Robert Lefebvre 6b8c39dd10 ACM: Creating Yaw_Look_Ahead yaw mode. 
This function is not fully tested yet.
 2012-11-26 21:37:13 -05:00
Robert Lefebvre 3f0e8dd358 ACM: TradHeli 
Bringing in Low Pas Filter
Commented out because it does not build.
Needs updates to Low Pass Filter Lib
 2012-11-26 21:21:12 -05:00
Robert Lefebvre e8d619acad ACM: Begin creation of TradHeli rate control. 
May affect Multi-Rotors.
 2012-11-26 21:02:41 -05:00
Robert Lefebvre 6b1fee767a ACM: TradHeli 
Creating Stab_Collective Function to allow for different collective ranges between Stabilize and other modes.
This makes for a smoother collective action in Stabilize mode with manual throttle, while still allowing full collective travel in Acro and other modes.
 2012-11-26 19:37:20 -05:00
Robert Lefebvre 95eeda7cf7 ACM: TradHeli 
Removing Angle Boost function.
Does not make sense for helis due to aerodynamics.  Can cause more problems than it solves.
 2012-11-26 18:58:21 -05:00
Robert Lefebvre 8056b78c55 ACM: TradHeli 
Remove Rate I-term reset when throttle stick is on the bottom.  This could be very bad for helis since it's plausible to use full downstick while flying.
There is obviously a risk here of building up a false I-term on the ground but this isn't a good solution for that anyway.
Also removed what appears to be some deadwood.
 2012-11-26 18:49:24 -05:00
Andrew Tridgell 5818aaad42 Copter: fixed build error 
thanks to Marco for pointing this out
 2012-11-24 20:39:35 +11:00
Andrew Tridgell cd07d965a7 Copter: ported RSSI_PIN option from ArduPlane 
this is useful for OSD users
 2012-11-22 20:59:33 +11:00
rmackay9 3372355e07 ArduCopter: remove commented out remnants of roll_scale_d and pitch_scale_d 2012-11-22 12:50:39 +09:00
Andrew Tridgell bcae83c4f6 ACM: make it possible to run CLI on radio port in ArduCopter 2012-11-21 21:41:34 +11:00
rmackay9 07a7a1acd8 ArduCopter: replaced digitalRead and digitalWrite with faster calls 
improved performance logging to dataflash
 2012-11-19 01:16:07 +09:00
Robert Lefebvre 9c6e914bf8 Added Leonard to Contributor List. 2012-11-16 15:43:03 -05:00
rmackay9 258442770d ArduCopter: flight mode changes ignored while in throttle failsafe 
reaction time to flight mode changes (when not in failsafe) reduced from 0.6 seconds to 0.1 seconds
 2012-11-13 12:50:51 +09:00
rmackay9 dcd98eee78 ArduCopter: remove some variables no longer required with introduction of AP_state 2012-11-12 12:41:25 +09:00
rmackay9 ac5dcc8d49 ArduCopter: remove last remanants of rate_d to resolve compiler warning of unused variables 2012-11-12 12:35:58 +09:00
Jason Short c1b759d5d8 ACM: Added a speed filter for throttle cruise, increased alt change rate for alt hold, increased the max climb_rate reporting 2012-11-11 18:17:33 -08:00
Jason Short 9e0b0b9fcd ACM : loging ApState at faster rate 2012-11-11 18:00:10 -08:00
rmackay9 bcb9519fd7 ArduCopter: renamed system bitmap to ap_system to resolve desktop compile issues 2012-11-11 22:42:10 +09:00
rmackay9 95f6357d35 ArduCopter: fix APM2 build 2012-11-10 22:06:23 +09:00
Jason Short e4cec91e59 ACM : Arducopter Added ap state bitfield, system bitfield 2012-11-09 22:15:15 -08:00
Jason Short cdabc3878b ACM: Arducopter - remove the stabilize D scheduling 2012-11-09 22:15:15 -08:00
Jason Short d2a0913b2d ACM : formatting 2012-11-09 22:15:15 -08:00
rmackay9 b13264c884 AP_InertialNav: reanme AP_InertialNav and ThirdOrderCompFilter classes to resolve desktop build compiler errors 2012-11-07 22:24:00 +09:00
rmackay9 ad431d2f25 ArduCopter: fixed HIL build caused by optical flow semaphore changes 2012-11-07 21:13:34 +09:00
rmackay9 1f801714e8 ArduCopter: incorporate new version of inertial navigation 
Moved several navigation functions from ArduCopter.pde to navigation.pde
 2012-11-07 19:21:31 +09:00
rmackay9 a1b4ec6d0e ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
Jason Short e138b0a1d7 ACM: Added simple mode bearing logging for bug hunting 2012-10-28 12:12:38 -07:00
rmackay9 78316adf75 ArduCopter: replace Serial.print with Serial.print_P to save memory. 
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
 2012-10-22 16:45:24 +09:00
Jason Short a0752dc7dc ACM Acceleration management 
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
 2012-10-21 14:32:39 -07:00
rmackay9 a37a9b5b67 ArduCopter: updated firmware version to 2.8 2012-10-20 09:50:53 +09:00
Pat Hickey d4bb8a10d7 Update ArduCopter and ArduPlane dependencies on AP_Menu 2012-10-18 20:53:39 -07:00
Robert Lefebvre 592f4040fd Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups. 2012-10-18 16:39:05 -04:00
rmackay9 1c08e48b4b ArduCopter: updated firmware version to 2.7.4-Zeta 2012-10-18 23:30:28 +09:00
rmackay9 583f2e49a3 ArduCopter: integrated Leonard Hall's improved ACRO mode 2012-10-18 23:24:34 +09:00
rmackay9 d2912e4e01 ArduCopter: added spi_semaphore to stop conflicts between dataflash and optical flow sensor on APM1 2012-10-18 17:04:44 +09:00
rmackay9 9e3c2dd105 ArduCopter: updated firmware version to 2.7.4-Epsilon 2012-10-17 19:27:11 +09:00
rmackay9 8519fe55d3 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9 956b347d68 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9 4016f3ba85 ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00