Commit Graph

526 Commits

Author SHA1 Message Date
Lucas De Marchi c6b0a71c47 AP_Compass: Calibrator: use inplace initializer on array 2016-11-18 20:03:30 -02:00
Siddharth Bharat Purohit b36ee10e7c AP_Compass: fix wrong memset in compass calibrator 2016-11-18 20:03:30 -02:00
Andrew Tridgell e4454c5056 AP_Compass: setup for new PX4 board IDs 2016-11-11 08:08:55 +11:00
Andrew Tridgell 0eac781559 AP_Compass: don't run the AK8963 on the external MPU9250
this saves us one mag slot for another external mag, and leaves the
primary MPU9250 undisturbed by the mag traffic on the bus
2016-11-10 13:05:22 +11:00
Andrew Tridgell 3d5c57c5dc AP_Compass: fixed orientation of PH2 in-tree compass drivers 2016-11-10 11:44:52 +11:00
Andrew Tridgell 4ba00720aa AP_Compass: make init() private
not called from frontend
2016-11-10 11:44:52 +11:00
Andrew Tridgell c68a6451cb AP_Compass: use in-tree drivers for PH2SLIM 2016-11-10 11:44:52 +11:00
Andrew Tridgell 4602b4d679 AP_Compass: improve init and calibration of hmc5843 2016-11-09 17:08:15 +11:00
Andrew Tridgell 3d48a72f59 AP_C0mpass: switch pixracer to always use in-tree drivers 2016-11-09 17:08:14 +11:00
Andrew Tridgell b363a65c2e AP_Compass: enable in-tree drivers for PHMINI 2016-11-09 17:08:13 +11:00
Andrew Tridgell 875fa60452 AP_Compass: fixed external I2C HMC5983 rotation on pixhawk 2016-11-09 17:08:11 +11:00
Andrew Tridgell bd8867be38 AP_Compass: cope with NULL dev pointer in driver probe functions 2016-11-09 17:08:11 +11:00
Andrew Tridgell 3b53caad87 AP_Compass: keep old hmc5843 ID
prevent re-use. thanks to Lucas
2016-11-09 17:08:10 +11:00
Andrew Tridgell 02c2ba1331 AP_Compass: fixed dup semaphore bug
thanks to Lucas for spotting this!
2016-11-09 17:08:10 +11:00
Andrew Tridgell f31a017ace AP_Compass: changes to HMC5843 driver
this makes the HMC5843 use single-shot mode, which makes it more
robust to bus resets. It also adds WHOAMI checking and enables
automatic temperature compensation.

Unfortunately this makes existing calibration values incompatible, so
a re-cal is required. The device ID has been changed to reflect the
driver change.
2016-11-09 17:08:10 +11:00
Andrew Tridgell 05769640d1 AP_Compass: support rotations on AK8963 2016-11-09 17:08:08 +11:00
Andrew Tridgell 2716ab8408 AP_Compass: added support for per-instance rotations 2016-11-09 17:08:08 +11:00
Andrew Tridgell fac895b0e6 AP_Compass: setup read flag for SPI transfers 2016-11-09 17:08:08 +11:00
Andrew Tridgell 147b253e65 AP_Compass: make device IDs match PX4 drivers
match in-tree drivers to PX4Firmware drivers
2016-11-09 17:08:06 +11:00
Andrew Tridgell de7913e8e9 AP_Compass: implement device IDs for compass drivers 2016-11-09 17:08:04 +11:00
Andrew Tridgell ac0ea12b42 AP_Compass: enable HMC5843 on SPI for PH2 2016-11-09 17:08:03 +11:00
Andrew Tridgell 1c631ea037 AP_Compass: cleanup use of backend semaphores
fixed drivers that didn't protect accumulation counters
2016-11-09 17:08:01 +11:00
Andrew Tridgell 9afd51350e AP_Compass: use thread per bus in more drivers
and removed use of timer suspend
2016-11-09 17:08:01 +11:00
Andrew Tridgell 974827aa82 AP_Compass: enabled AK8963 on PX4 2016-11-09 17:08:01 +11:00
Andrew Tridgell 2e4151d14e AP_Compass: enable lsm303d mag on FMUv2 2016-11-09 17:08:00 +11:00
Andrew Tridgell 36190ba545 AP_Compass: use thread per bus for lsm303d mag 2016-11-09 17:08:00 +11:00
Andrew Tridgell 7bd52eb112 AP_Compass: allow for in-tree drivers for PX4 2016-11-09 17:07:58 +11:00
Andrew Tridgell 96adfccae3 AP_Compass: switch hmc5983 driver to use periodic callback on the bus
this does not yet work with the mpu6000 auxiliary bus
2016-11-09 17:07:55 +11:00
murata c808ee2f49 Global: To nullptr from NULL.
RC_Channel: To nullptr from NULL.

AC_Fence: To nullptr from NULL.

AC_Avoidance: To nullptr from NULL.

AC_PrecLand: To nullptr from NULL.

DataFlash: To nullptr from NULL.

SITL: To nullptr from NULL.

GCS_MAVLink: To nullptr from NULL.

DataFlash: To nullptr from NULL.

AP_Compass: To nullptr from NULL.

Global: To nullptr from NULL.

Global: To nullptr from NULL.
2016-11-02 16:04:47 -02:00
Peter Barker e4001e67e2 AP_Compass: add missing parameter metadata 2016-10-27 09:15:03 -07:00
Michael du Breuil deec4ec6af Compass: Rework compass calibrator
Summary of significant changes:
  -Autsave doesn't depend on STREAM_EXTRA3
  -Don't risk only saving one compass on copter if CAL_ALWAYS_REBOOT is set
  -Only calibrate compasses that are both health and marked for use (there was a inconsistency in handling the mask)
  -Fix incorrect failure reporting on DO_ACCEPT_MAG_CAL with a mask of 0 if a channel was specifically not started
  -Fix not starting the buzzer if the delay is set to 0 seconds
  -Always send MAG_CAL_REPORT until its acknowledged
  -Correct the field in MAG_CAL_REPORT for autosave to indicate if the compass had actually been saved, rather then being scheduled to be saved
  -Remmove unused public interfaces
2016-10-27 14:04:33 +11:00
Mathieu OTHACEHE 152edf7189 Global: remove mode line from headers
Using a global .dir-locals.el file is a better alternative than
reincluding the same emacs header in every file of the project.
2016-10-24 09:42:01 -02:00
Peter Barker 216a6493c9 AP_Compass: AP_Compass_LSM9DS1: remove unused variable 2016-10-24 08:57:56 -02:00
Lucas De Marchi ae53920e5b build: don't build examples with old build system
We currently check examples are buildable with waf which doesn't need
the libraries to be specified in a make.inc file.  Having the makefiles
there is misleading since people try to build and realize the build is
broken.
2016-10-11 13:03:08 +11:00
Andy Little 0d113b265c Examples: fix examples for px4
The change to use AP_BoardConfig messed up the examples. Here are some
updated but there are plenty more to do.
2016-10-04 12:50:47 -03:00
Andrew Tridgell 36ea946cf5 AP_Compass: use board defined compass ofs max in calibrator 2016-09-23 10:53:00 +10:00
Jonathan Challinger 17fb7dc88f AP_Compass: initialize offset before beginning sphere fit 2016-09-23 10:52:51 +10:00
Jonathan Challinger 419f1bc00e AP_Compass: change fixed point format for more range 2016-09-23 10:52:46 +10:00
Jonathan Challinger 0652d71a72 AP_Compass: correct wrapping behavior in conversion to fixed point 2016-09-23 10:52:44 +10:00
Andrew Tridgell f82827ce79 AP_Compass: removed disco special compass offsets
not needed any more with newer hardware
2016-09-14 19:06:06 +10:00
Randy Mackay ba5db0c5d8 Compass: add CAL_FIT parameter description values
No functional change
2016-09-14 09:57:52 +09:00
José Roberto de Souza 13287f61e3 AP_Compass: Make COMPASS_AERO probe BMM150 2016-09-03 01:03:17 -03:00
Gustavo Jose de Sousa b259356703 AP_Compass: BMM150: convert it to use Device periodic callback 2016-09-03 01:03:07 -03:00
Lucas De Marchi 667fca60f5 AP_Compass: BMM150: reduce lock region
Use a semaphore to update the accumulated values instead of using the
timer semaphore.
2016-09-03 01:03:07 -03:00
Matt 9eca21c26a AP_Compass: Removed duplicate code 2016-08-29 10:38:41 -03:00
Lucas De Marchi 4595a2b7d8 AP_Compass: Remove i2c lockup count
This was returned only for a single bus and on all supported platforms
this is hardcoded to 0.
2016-07-28 18:03:09 -03:00
Lucas De Marchi c6edae7e8e Revert "Global: workaround toolchain problem on windows"
This reverts commit 4e2b30b413.

The toolchain for windows is now updated, we can remove this workaround.
2016-07-25 17:56:12 -03:00
Andrew Tridgell 018d8f732a AP_Compass: work around poor magnetic setup on Disco
bring compass offsets into line with what the calibrator can handle
2016-07-20 13:38:17 +10:00
Lucas De Marchi 4e2b30b413 Global: workaround toolchain problem on windows
The minimum version for gcc was supposed to be 4.9 for any platform.
However our build instructions are outdated. Remove the problematic
parts that use the sparse-endian.h header while we don't fix the setup
for windows.
2016-07-19 09:30:39 +09:00
Lucas De Marchi 3ba27df405 AP_Compass: BMM150: minor refactors
- Correctly sort includes and add missing AP_Math.h
  - Use anonymous struct for trim_registers in _load_trim_values,
    renaming its members so they don't start with underscore
  - Don't change _dig* values when we failed to read from sensor
  - Add some blank lines
  - Make _dig_* members be inside a _dig struct
  - Use constrain_int32 instead of if/else chain
  - s/time_us/time_usec/
  - Construct raw_field with a single constructor in _update()
  - Add missing copyright notice
  - Group methods together in declaration
2016-07-06 10:04:05 -03:00