Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
13,786 Commits 71 Branches 509 Tags 717 MiB
Commit Graph

13786 Commits

Author SHA1 Message Date
Andrew Tridgell 6bf76acf96 PX4: add TESTS_MATHLIB_DISABLE define 
this helps building with upstream master
 2014-10-30 08:09:39 +11:00
Andrew Tridgell 500ecebf57 PX4: conditionally build auth command and libraries 
this makes it possible to build with upstream master
 2014-10-30 08:09:38 +11:00
Randy Mackay bb85e77173 Copter: update AC3.2-rc14 ReleaseNotes 2014-10-29 18:09:46 +09:00
priseborough 6a85753a5b AP_NavEKF : add INIT_GYRO_BIAS_UNCERTAINTY definition 2014-10-29 17:39:47 +09:00
Randy Mackay beb54b087b Copter: re-enable CPU failsafe if arming fails 2014-10-29 16:00:32 +09:00
Randy Mackay cce876c2f9 Copter: fail to arm if gyro cal fails 2014-10-29 15:36:29 +09:00
priseborough fb14da7a4b AP_NavEKF : Add public method to reset gyro bias states 2014-10-29 15:32:21 +09:00
priseborough 2c07299c04 AP_AHRS : Add reset of EKF gyro bias states 2014-10-29 15:32:18 +09:00
Randy Mackay 8a776f8ff8 GPS: init primary_instance to zero 2014-10-29 12:04:13 +09:00
Benoit PEREIRA DA SILVA 010d267376 GPS: use primary for Notification 2014-10-29 12:04:12 +09:00
Craig Elder 5df3d24c77 Frame_params: 3DR_X8+_RTF.param 
Adding param file for 3DR X8+
 2014-10-28 19:33:44 -07:00
Jonathan Challinger 6848897999 AP_GPS: Add agcCnt to UBX1 message 2014-10-29 08:18:04 +11:00
Randy Mackay 0ac3267d52 Copter: reset ahrs gyro drift after gyro calibration 2014-10-28 20:25:36 +09:00
Randy Mackay dffcfb42bc AHRS: add reset_gyro_drift method 2014-10-28 20:25:33 +09:00
Jonathan Challinger 25a2fa67b6 Copter: don't stop logging on disarm when LOG_WHEN_DISARMED is set 2014-10-28 15:19:01 +09:00
Markus Koetter 789fd06192 LogAnalyzer - Improve Autotune Test 
- previously version could report failed autotune sessions as valid and
   valid sessions as failed
 2014-10-27 15:55:57 -07:00
Markus Koetter c2030de4ec LogAnalyzer: write \xff EOF assumption to stderr 2014-10-27 15:53:36 -07:00
Markus Koetter cf4435989e LogAnalyzer: Binary Logs may end with \xff 
- ignoreBadlines can be used to assume this is a proper EOF
 2014-10-27 15:53:35 -07:00
Randy Mackay 07a74bc39f Copter: ReleaseNotes for AC3.2-rc14 2014-10-27 22:37:19 +09:00
Randy Mackay 7d48704f82 AP_NavEKF: fix parameter descriptions 
Errors pointed out by Richard (DK)
 2014-10-27 22:20:03 +09:00
Randy Mackay ac7ea2a12c AC_PosControl: use AttControl's sqrt_controller 2014-10-27 15:20:48 +09:00
Jonathan Challinger 7224669399 AC_AttitudeControl: cleanup angle_ef_roll_pitch_rate_ef_yaw_smooth 2014-10-27 15:20:46 +09:00
Jonathan Challinger 779baa006d AC_PosControl: Use sqrt_controller function 2014-10-27 15:20:44 +09:00
Jonathan Challinger 0c4a489491 AC_AttitudeControl: use sqrt_controller function 2014-10-27 15:20:43 +09:00
Randy Mackay fc898a00a3 AC_AttControl: add sqrt_controller 
Original code by Jonathan Challinger
 2014-10-27 15:20:40 +09:00
Randy Mackay 4aa07d7aef LogAnalyser: rename BalanceTwist to MotorBalance 2014-10-27 13:58:19 +09:00
Randy Mackay 98e9ce3206 LogAnalyser: TestBalanceTwist sanity check of motor values 2014-10-27 13:58:16 +09:00
Jonathan Challinger a62f1f0f48 LogAnalyzer: updated testCompass to match our prearm check 2014-10-27 13:58:15 +09:00
Jonathan Challinger 0955284d7e LogAnalyzer: balance/twist initial commit 2014-10-27 13:58:12 +09:00
Randy Mackay 28b98a170b Copter: fix to dcm-check to be continuous 
dcm-check was triggering after 10 bad headings but these did not need to
be continuous meaning if the vehicle was flown long enough it would
almost certainly trigger a dcm-check failure and land
 2014-10-27 12:37:56 +09:00
Andrew Tridgell 26de54c29a AP_AHRS: cope with 90 degree pitch in update_trig() 
this prevents a numerical error in Replay
 2014-10-25 11:21:04 +11:00
Andrew Tridgell 485397c4cb Replay: cope with old copter attitude and baro msgs 2014-10-25 11:20:26 +11:00
Andrew Tridgell ddd27f5acb Plane: increase mav throttle slew rate in generated param docs 2014-10-25 10:06:29 +11:00
Andrew Tridgell e4f7a7f6d2 Plane: removed incomplete DF log of go-around 
the right commands should already be logged. This code would have
logged a lot of uninitialised bytes
 2014-10-24 22:09:41 +11:00
Andrew Tridgell c046273be2 Plane: fixed verify_land() comment for go-around 2014-10-24 22:04:59 +11:00
Andrew Tridgell 1f3e285ed0 Plane: reset commanded_go_around at start of land 
this allows multiple landing attempts
 2014-10-24 22:04:30 +11:00
Andrew Tridgell ad58822cb5 Plane: removed impossible boolean check 2014-10-24 22:04:05 +11:00
Andrew Tridgell 959cd11cb1 Plane: save a byte in auto_state 
keep single bits together to save space on APM2
 2014-10-24 22:03:34 +11:00
Michael Day 01f611daa9 Plane: "Go around" operation. Assumes go around behavior follows land wp. 2014-10-24 21:51:46 +11:00
Andrew Tridgell e434850f1f Plane: move set_mode() after mission.set_current_cmd() 
if set_current_cmd() fails, we don't want to change to AUTO with some
unknown mission item
 2014-10-24 21:51:27 +11:00
Andrew Tridgell 02b80db67c Plane: minor code style change 
use comment and function style consistent with rest of code
 2014-10-24 21:50:18 +11:00
Michael Day c1b949a74f Plane: Bugfix. Changing to landing sequence now works at mission end. 2014-10-24 21:42:06 +11:00
Michael Day 83c2f497a3 AP_Mission: Change jump_to_landing_sequence to get_landing_sequence_start 2014-10-24 21:42:06 +11:00
Andrew Tridgell 5ddbcc296d AP_OpticalFlow: fixed example build 2014-10-24 21:38:03 +11:00
Andrew Tridgell ad8b73c8aa AP_Airspeed: update ARSPD_AUTOCAL docs 2014-10-24 17:16:17 +11:00
Randy Mackay 41a6393356 RangeFinder: PulsedLight I2C addr to 0x62 2014-10-24 15:08:04 +09:00
Andrew Tridgell ad7c612334 AP_InertialSensor: fixed SITL with new HIL code 2014-10-24 15:05:44 +11:00
Andrew Tridgell aeaa3c1e04 AP_InertialSensor: fixed build for VRBrain 2014-10-24 12:10:41 +11:00
Andrew Tridgell 40e83ceb1f AP_InertialSensor: simplify next sample time calculations 
this makes the calculation much clearer
 2014-10-24 12:10:40 +11:00
Andrew Tridgell 9dfbdb1e69 AP_InertialSensor: run the MPU6000 at 1kHz on fast CPUs 
use a software filter and 1kHz sampling for better filtering if we
have a fast enough CPU to do it
 2014-10-24 12:10:40 +11:00