Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
13,786 Commits 71 Branches 509 Tags 716 MiB
Commit Graph

13786 Commits

Author SHA1 Message Date
Randy Mackay b0e6931ab0 Copter: add DCM_CHECK_THRESH parameter 2014-10-16 17:22:11 +09:00
Randy Mackay b96e123480 Copter: remove unused Log_Write_IMU function 2014-10-16 15:25:34 +09:00
Randy Mackay 7bd8d48809 Copter: fence breach causes disarm if landed 
Previously it would only disarm if the throttle was also at zero.
Pair programmed with Tridge
 2014-10-16 14:09:02 +09:00
Andrew Tridgell 26f7ab49e3 Copter: fixed some build warnings 2014-10-16 14:04:11 +09:00
Randy Mackay eed6a1ce61 OptFlow: fix example sketch so it compiles 2014-10-16 13:52:07 +09:00
Randy Mackay 4e06970a1c Copter: disable OptFlow in SITL 2014-10-15 20:46:06 +09:00
Randy Mackay a476a914b0 OptFlow_PX4: check healthy before updating 2014-10-15 16:36:40 +09:00
Randy Mackay f504ea7b30 OptFlow_ADNS3080: check healthy before updating 2014-10-15 16:36:38 +09:00
Randy Mackay aa3e34a44a Copter: move update_optflow to sensors.pde 
Also slightly shorten function name
 2014-10-15 16:36:36 +09:00
Randy Mackay d238f48dda OptFlowPX4: fix compile error for APM 2014-10-15 16:36:33 +09:00
Randy Mackay 67b7b2d667 Copter: enable optflow by default for Pixhawk 2014-10-15 16:36:31 +09:00
Randy Mackay 7b07b575cf Copter: pilot override used immediately in OF_Loiter 
Replace some hard coded numbers with definitions
 2014-10-15 16:36:28 +09:00
Randy Mackay a9cfbb71b8 OptFlowPX4: use ORB to pull data from sensor 
This change is required because PX4Firmware has changed the method used
to pull data from the sensor.
 2014-10-15 16:36:25 +09:00
Randy Mackay 28876b7ef6 Copter: log ground distance from optflow sensor 2014-10-15 16:35:51 +09:00
Randy Mackay ec4581b35a OptFlow: add ground_distance_m 2014-10-15 16:35:48 +09:00
Randy Mackay b2e167f9a5 Copter: Of_Loiter uses sensor velocity instead of integrated position 2014-10-15 16:35:45 +09:00
Randy Mackay 3201a8dbca Copter: integrate optflow_enable param move to optflow class 2014-10-15 16:35:43 +09:00
Randy Mackay 717e63f47a Copter: instantiate optflow on Pixhawk 
Run sensor reads from scheduler
 2014-10-15 16:35:40 +09:00
Randy Mackay 021485fffc Copter: simpler optflow logging 
Removed of_loiter control output from message
add TimeMS to OF dataflash log msg
 2014-10-15 16:35:38 +09:00
Randy Mackay 765ce2f6ca Copter: optflow parameters moved to optflow class 2014-10-15 16:35:36 +09:00
Randy Mackay 4b0548973a OptFlow: add PX4Flow support 2014-10-15 16:35:33 +09:00
Randy Mackay 3c4be75487 OptFlow: reorganise ADNS3080 to simplified interface 2014-10-15 16:35:31 +09:00
Randy Mackay b64f9ed964 OptFlow: rename and restructure OpticalFlow class 
AP_OpticalFlow.h becomes simply a file that includes all other optical
flow header files.
OpticalFlow class simplified to only return surface quality, raw output
and velocity vector.
 2014-10-15 16:35:29 +09:00
Randy Mackay 4bdd814dcc Build: enable px4flow driver on Pixhawk 2014-10-15 16:35:26 +09:00
Andrew Tridgell 4ad643b233 AP_AHRS: use a common function for updating the CD values 
this ensures the wrapping of yaw is consistent between the 3 use cases
 2014-10-15 13:18:08 +11:00
Andrew Tridgell eec5cd5add AP_AHRS: restore DCM attitude before update() 
The DCM drift correction code uses the current attitude to calculate
error values to update its gyro drift correction. If we were using EKF
then without this patch the DCM code running as an alternative AHRS
source would be using the EKF attitude for calculating the error
value, leading to very bad gyro drift estimation
 2014-10-15 11:15:33 +11:00
Andrew Tridgell 63c06ea2af AP_AHRS: fixed calls to DCM in parent class 
use_compass() and reset() are common to AP_AHRS_DCM and
AP_AHRS_NavEKF. As AP_AHRS_NavEKF is a child of AP_AHRS_DCM, when we
call use_compass() from within AP_AHRS_DCM we actually end up calling
AP_AHRS_NavEKF::use_compass().

This has the effect of disabling the compass in DCM when EKF is active
and EKF has decided not to use the compass. That means that the DCM
yaw (and in fact the whole attitude) can get badly off while EKF is
enabled, making DCM an ineffective fallback if EKF fails.

The fix is to call the specific class versions of use_compass() and
reset()
 2014-10-15 10:12:50 +11:00
Andrew Tridgell 6e0e56a6ef Replay: fixed loading of users parameters and parameter override 
use compass.set_offsets() to avoid trying to write to storage
 2014-10-15 09:17:22 +11:00
Andrew Tridgell b437977547 AP_Compass: added set_offsets() interface 
this will be used by Replay to prevent the need for saving parameters
 2014-10-15 09:16:31 +11:00
Randy Mackay 6690aff305 AC_Motors: param description addition 2014-10-14 12:43:22 +09:00
Randy Mackay d09faa0015 BattMon: minor param description additions 2014-10-14 12:42:57 +09:00
Randy Mackay 45e0e48e54 BattMon: minor param description update 2014-10-14 12:42:45 +09:00
Randy Mackay 3a81732721 Baro: minor param description updates 2014-10-14 12:42:27 +09:00
Randy Mackay 57229345e0 Copter: minor param description updates 2014-10-14 12:42:14 +09:00
Randy Mackay 6a225865ce Copter: accept velocity requests in Auto-Guided mode 2014-10-14 11:27:34 +09:00
Randy Mackay c636ea9101 Copter: support SET_POSITION_TARGET messages 2014-10-13 21:55:17 +09:00
Randy Mackay 992ce9b69c Copter: remove nav_guided structure 
This has been replaced by guided_limit structure
 2014-10-13 21:40:26 +09:00
Randy Mackay 6659473420 Copter: support GUIDED_ENABLE and GUIDED_LIMITS 
Split of NAV_GUIDED into these two command necessitated guided mode
store the limits
 2014-10-13 21:40:24 +09:00
Randy Mackay be1621877f Mission: support GUIDED_ENABLE and GUIDED_LIMITS 
This replaces the ardupilot only NAV_GUIDED command.
Also remove support for NAV_VELOCITY mission command which will be
replaced by SET_POSITION_TARGET non-mission command.
 2014-10-13 21:40:23 +09:00
Randy Mackay e5c3c306bd Copter: remove unused pilot_yaw_override flag 2014-10-13 21:40:21 +09:00
Randy Mackay 8997c224e2 Copter: enable Guided velocity controller for Pixhawk 2014-10-13 21:40:20 +09:00
Andrew Tridgell 3c7cc5f40c AP_RangeFinder: auto-update PX4 ll40ls max/min distance 
this allows the range of the Lidar to be set by the user using
RNGFND_MAX_CM and RNGFND_MIN_CM
 2014-10-13 19:07:38 +11:00
Andrew Tridgell b688577825 autotest: update compiler 2014-10-13 16:07:32 +11:00
Andrew Tridgell 4c984d9331 Plane: start preparing for 3.1.2 2014-10-13 10:25:53 +11:00
jschall c5e85956b1 Update CONTRIBUTING.md 2014-10-12 00:11:30 -07:00
jschall c3b695a336 Update CONTRIBUTING.md 2014-10-11 23:46:42 -07:00
Jonathan Challinger dd38ad6bbf Copter: Start logging on arming attempt, rather than on successful arm 2014-10-11 17:32:27 +09:00
Randy Mackay 67a38be7ce Tracker: update version to 0.2 2014-10-11 17:11:07 +09:00
Randy Mackay 32d8e5c8d4 Tracker: only run servo updates when safety is off 
Largely removes the sudden jerk that occurs when the user pushes the
safety switch
 2014-10-11 17:06:29 +09:00
Randy Mackay 9d4107f1fc Copter: allow arming in GUIDED only from GCS 
Also changed mode_allows_arming function to accept arming_from_gcs param
Also remove AUTOTUNE from arming list
 2014-10-11 16:05:32 +09:00