Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,211 Commits 71 Branches 509 Tags 780 MiB
Commit Graph

4211 Commits

Author SHA1 Message Date
Michael Oborne 6a6c8eb708 change rover id to mav_ground 2012-05-16 18:06:40 +08:00
Jason Short d1cd04486a removed retro loiter code since Angel has a branch now. 
shrank speed filter to avoid latency
removed unused forward estimator code

placed code for switchover to gps.groundspeed at 1.5m/s

added clamp for D term when below .5m/s to eliminate noise

added hybrid I-term based on speed error and position

changes Loiter D term to use position rather than acceleration to avoid noise
 2012-05-15 22:14:23 -07:00
Jason Short 7f3e142fa8 Loiter Gains based on new SIM 2012-05-15 22:01:01 -07:00
Robert Lefebvre c5f7b2fff2 Fixed Syntax error. 2012-05-15 12:35:35 -04:00
Robert Lefebvre c8fb9a6635 More CopterLEDS changes. 
Merged CopterLEDS and Piezo functions to eliminate pin conflict on APM2.  Created new Parameter bit to turn piezo function on and off from MP. Moved GPS and Aux pin assignments to allow commonality between APM1 and 2.  Set LED_Mode parameter default to 9 in order to make CopterLEDS completely backwards compatible with old Motor LEDS and Piezo code.  Legacy users should see no difference.
 2012-05-15 12:00:21 -04:00
Robert Lefebvre a285e2779f CopterLEDS changes for APM2 2012-05-15 10:07:03 -04:00
Hazy d41001ec1e APM Planner - a few translate 2012-05-15 20:40:04 +08:00
Jean-Louis Naudin 01c4f6105b APMrover 2.1.4 - cosmetic changes 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-15 08:00:36 +02:00
Michael Oborne e8e2d7075b firmware build 2012-05-15 09:55:09 +08:00
Robert Lefebvre 10b5d758f8 Changed software ID from 0 to 20 for ArduRover V2 Divergence. 
Also changed definition of flight mode 2 from Stabilize to Learning.
 2012-05-14 15:21:29 -04:00
Jean-Louis Naudin 5cece403a5 APMrover v2.1.4: compatibility with the latest version of mavlink library... 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-14 20:33:03 +02:00
Jean-Louis Naudin 4a4402556b APMrover v2.1.3 : 
Added option (hold roll to full right + SW7 ON/OFF) to init_home during the wp_list reset
Add ROV_SONAR_TRIG (default = 200 cm) - tested by Franco
Restart_nav() added and heading bug correction, tested OK in the field
RTL then stop update - Tested OK in the field
Added SONAR detection for obstacle avoidance

Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-14 17:47:08 +02:00
Michael Oborne f4975cb7fe firmware build 2012-05-14 15:15:08 +08:00
Michael Oborne 854b2a6f9b firmware build 2012-05-14 12:38:19 +08:00
Michael Oborne 716be4f511 firmware build 2012-05-14 12:35:20 +08:00
Andrew Tridgell 3ae1c6f9e0 APM: prepare for 2.34 2012-05-14 14:29:59 +10:00
Michael Oborne a0394c8b68 APM Planner 1.1.85 
work on opengltest
fix last missing param
fix com port selection on connecting to bad comport
add convert to csv. entire log
add log caching to image georef. for tlog and logs
add srtm data caching
 2012-05-13 18:56:42 +08:00
rmackay9 357d6c2d9b ArduCopter: bug fix for reversing tri servo 
Extended AP_MotorsTri class to take in pointer to rc_tail servo (rc_7) and we use this servo's REV parameter to determine whether to reverse the output to the tail servo or not
 2012-05-13 12:36:46 +09:00
rmackay9 2f74004fcb ArduCopter: updated version to 2.5.5 2012-05-13 08:47:43 +09:00
Michael Oborne 4fc61505df APM Planner 1.1.84 
3dr radio fix's + rfd900
other misc fixs
 2012-05-11 17:10:08 +08:00
Craig Elder 69bf5700cd IMU: expose IMU_PRODUCT_ID as EEPROM Variable 
this will allow us to log the Product ID in tlogs
 2012-05-09 18:30:36 -07:00
Craig Elder 4a1d8b0875 AP_InertialSensor: Return product ID from sensor initialization 
this exposes the product ID to the IMU Layer
 2012-05-09 18:30:36 -07:00
Craig Elder 4c46955612 PRODUCT: Define product IDs for all supported products 2012-05-09 18:30:36 -07:00
Craig Elder ed99940bee MPU6000: Fixed Scaling on Accelerometers Rev C vs Rev D 
Rev C have non standard scaling factor that is 1/2 of the data sheet
Rev D chips conform to the specification
 2012-05-09 18:30:35 -07:00
Jean-Louis Naudin 899e6e66b0 APMrover v2.0c - tested with APM v2 full kit (Oilpan) - dualversion (IMUless + IMUfull) 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-09 07:12:26 +02:00
Andrew Tridgell 46ee92441e HILTest is not needed any more 2012-05-09 13:47:44 +10:00
Michael Oborne db2416d045 APM Planner 1.1.83 
fix null exception. if connect and not view the link stats, an exception is thrown on disconnect.
 2012-05-08 22:37:54 +08:00
Michael Oborne c01626818b APM Planner 1.1.82 
modify 3dr radio packet size 64 > 32
add andrews link status Mod - thanks
add hw voltage to status
add generic logbrowse pid class "pid-*" > "pid-1"
 2012-05-08 21:21:19 +08:00
Michael Oborne f56d3afccf APM Planner 1.1.81 
mavlink 1.0 fixs
simulation hil fix for lorenz
modify default att rate to 10 hz
 2012-05-07 22:28:40 +08:00
Chris Anderson 34f5923ef3 fixed typo ("minimum" should have been "maximum") 2012-05-06 15:50:19 -07:00
Michael Oborne 218e70cd8b AP - fix attitude level hil mavlink 1.0 issue 2012-05-06 11:05:35 +08:00
Michael Oborne 67221a111e APM Planner 1.1.80 
hazy's lang mod
more hud mods - shorten lines
msi work + uploader
 2012-05-05 21:54:53 +08:00
Hazy bbbf1c7002 APM Planner 
ConfigPlanner translation
fix UI language changing issue
 2012-05-04 10:24:57 +08:00
Andrew Tridgell f43f5900bc Telemetry: make it possible to use UART2 on APM2 
building with TELEMETRY_UART2=ENABLED allows you to use the solder
bridge on the APM2 to enable telemetry on UART2. This allows both USB
telemetry and a radio at the same time.
 2012-05-04 10:39:44 +10:00
Michael Oborne 2acaac022c APM Planner 1.1.79 
modify hud
modify apm1 vs apm2 detector
 2012-05-03 21:30:18 +08:00
Andrew Tridgell 34af851b20 autotest: forced loiter via 2nd method 2012-05-03 15:40:13 +10:00
Michael Oborne 8420260ecf APM Planner 1.1.78 
recommit
 2012-05-03 12:40:50 +08:00
Jean-Louis Naudin 602fe6e55a APMrover v2.0b - Special update for rover heading calculation if compass is enabled 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-03 13:47:35 +10:00
Jean-Louis Naudin 53cbbfaaa4 APMrover V2.0b - updates about Save_WP 
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
 2012-05-03 13:47:32 +10:00
Andrew Tridgell 2dd655d87d MPU6k: added suspend/resume on init 2012-05-01 12:06:54 +10:00
Andrew Tridgell 88b2139d91 Baro: added suspend/resume on init 2012-05-01 12:06:54 +10:00
Andrew Tridgell d692a932ca ADC: added suspend/resume on init 2012-05-01 12:06:54 +10:00
Andrew Tridgell 534aee17e9 TimerProcess: added suspend_timer()/resume_timer() 
this will be used to avoid races in driver initialisation
 2012-05-01 12:06:54 +10:00
Michael Oborne b5908eed7f fix int/float conversion issue 2012-04-30 21:57:06 +08:00
Michael Oborne 0f6120506b fix metaparser bug 2012-04-30 21:54:27 +08:00
Andrew Tridgell 7d9e8c8d89 git: try to reduce the number of binary files added to the tree 
our git tree has become far too large due to large exe, dll etc
files. We can't fully get rid of the ones that are there, but this may
discourage people from adding more
 2012-04-30 22:47:08 +10:00
rmackay9 af86ae8cbf ArduCopter: fixed compile error by declaring extern print_latlon 2012-04-30 21:44:27 +09:00
Andrew Tridgell 435a64b97e ACM: fixed HIL build 2012-04-30 22:42:17 +10:00
Michael Oborne 75f091cd9c more arduplane param info 2012-04-30 20:39:41 +08:00
Michael Oborne fd40d40bc2 APM Planner 1.1.77 
fix param xml namespace issue
prevent sending unchanged params
 2012-04-30 20:07:14 +08:00