rmackay9
677b38a48e
ArduCopter: first implementation of surface tracking using sonar
...
Note: not yet enabled as part of any flight mode
2013-01-02 09:55:37 +11:00
rmackay9
92e271e517
AP_InertialNav: increase baro delay to 0.5 sec (was 0.2sec) to allow slower baro updates on APM1
2013-01-02 09:55:37 +11:00
rmackay9
d400e5040b
ArduCopter: turn on INERTIAL_NAV_Z in the config.h file so that it takes effect when built for the mission planner
2013-01-02 09:55:37 +11:00
rmackay9
daac540e08
ArduCopter: get_throttle_althold - add check to avoid divide by zero
2013-01-02 09:55:37 +11:00
rmackay9
af4d998697
AP_InertialNav: correct lat/lon to cm
2013-01-02 09:55:37 +11:00
rmackay9
0decd870dc
ArduCopter: inertial nav - only initialise horizontal position when home is initialised
2013-01-02 09:55:37 +11:00
rmackay9
4c14010029
ArduCopter: update release notes for 2.9-rc1
2013-01-02 09:55:37 +11:00
rmackay9
576af6d487
ArduCopter: bug fix to althold desired rate calculation. Fix from Jonathan.
2013-01-02 09:55:37 +11:00
rmackay9
02bf3ea027
ArduCopter: Battery failsafe triggers RTL only if we are more than 15m from home, otherwise it performs a LAND
2013-01-02 09:55:37 +11:00
rmackay9
ff40fa6aab
ArduCopter: alt hold bug fix - should use 2x linear distance when calculating the desired rate
...
Bug fix from Leonard.
2013-01-02 09:55:37 +11:00
rmackay9
68b62abd38
ArduCopter with the new Camera and Relay classes for APM1 and APM2.
...
All changes by Sandro Benigno
2013-01-02 09:55:37 +11:00
Sandro Benigno
6abe1fe94f
AP Camera changes required to work with modified AP_Relay lib.
2013-01-02 09:55:37 +11:00
Andrew Tridgell
0b2960e504
fixup relay merge
2013-01-02 09:55:37 +11:00
Sandro Benigno
cc7f26a99b
New Relay class and the subclasses for APM1 and APM2.
...
Updated AP_Camera class.
2013-01-02 09:31:32 +11:00
rmackay9
393c893cdb
ArduCopter: bug fix (attempt #2 ) for accel based throttle controller
...
Thanks to Jonathan for this.
2013-01-02 09:25:58 +11:00
rmackay9
e583ade62d
ArduCopter: bug fix to accel based throttle controller (was using m/s instead of cm/s)
2013-01-02 09:24:31 +11:00
rmackay9
e77b54c7dc
ArduCopter: bug fix to GUIDED mode. Now checks that desired altitude was reached before deciding the waypoint is complete.
2013-01-02 09:24:31 +11:00
rmackay9
e850ab7ccd
ArduCopter: add AUTO_VELZ_MIN, AUTO_VELZ_MAX and PILOT_VELZ_MAX to allow better control of climb/descent rate in auto and manual throttle modes
2013-01-02 09:24:31 +11:00
Craig@3DR
2de676306e
Improved parsing in auto detect
2013-01-02 09:24:31 +11:00
Craig@3DR
0ed25cf719
Global change all references from
...
GPS_PROTOCOL_MTK16
to
GPS_PROTOCOL_MTK19
2013-01-02 09:24:31 +11:00
rmackay9
5526ca204c
ArduCopter: on throttle failsafe, only initiate RTL if we are at least 15m from home
2013-01-02 09:22:51 +11:00
rmackay9
466097b383
ArduCopter: use inertial nav for current altitude and climb rate
2013-01-02 09:22:51 +11:00
Craig@3DR
8cfefbc275
Updated rev number in driver
2013-01-02 09:22:21 +11:00
rmackay9
5ba363b007
ArduCopter: move gcs_check function (which sends to ground station) to run when 50hz loop is not running
...
Also removed redundant heartbeat message
2013-01-02 09:21:35 +11:00
rmackay9
b8b17a4a70
ArduCopter: added AP_PerfMon library
2013-01-02 09:20:08 +11:00
rmackay9
331a73c4ac
ArduCopter: remove duplicate (?) send of MSG_EXTENDED_STATUS1
2013-01-02 09:20:08 +11:00
rmackay9
6baddf4aee
ArduCopter: remove unused variable last_5hz
2013-01-02 09:20:08 +11:00
rmackay9
1f5fdcdaa8
ArduCopter: remove unnecessary "Initialising APM message..."
2013-01-02 09:20:08 +11:00
Jason Short
8b62c4630b
ACM: Restore Multi-mode support
2013-01-02 09:20:08 +11:00
rmackay9
bd0e018ca0
ArduCopter: restore auto-trim method but now use AHRS.add_trim
2013-01-02 09:20:08 +11:00
Craig@3DR
e350bfbba8
Removed 2 more degree symbols from comments
2013-01-02 09:20:08 +11:00
rmackay9
b786cf40f7
ArduCopter: change GPS dataflash message to output unfiltered gps lat and lon
2013-01-02 09:19:39 +11:00
rmackay9
37b56662bd
AP_InertialNav: Jason's bug fix to inertial nav velocity and position calculations
2013-01-02 09:19:39 +11:00
rmackay9
d3cbf733ba
ArduCopter: ensure RTL performs a land if a failsafe has been triggered
2013-01-02 09:19:39 +11:00
Robert Lefebvre
6e64b1b357
ACM: Precision Loiter RePositioning code.
...
Protected behind a #define
2013-01-02 09:19:39 +11:00
rmackay9
120b494d83
Filter: #include AP_Buffer.h no longer needed now that completementary filter has been moved to InertialNav library
2013-01-02 09:19:39 +11:00
rmackay9
0fa6fdf407
ArduCopter: remove unused wait_for_yes function
2013-01-02 09:19:39 +11:00
rmackay9
e6519330f4
ArduCopter: remove unused rc_override variables to save 21 bytes
2013-01-02 09:19:17 +11:00
rmackay9
396024e802
ArduCopter: move scaleLongUp and scaleLongDown initialisation to init_home
2013-01-02 09:19:17 +11:00
rmackay9
7a5e4b8549
ArduCopter: stop unnecessary updates of target altitude and knock-on effect of too many EV message in dataflash log
2013-01-02 09:19:17 +11:00
rmackay9
1b5ff6aac6
ArduCopter: restore initial climb to RTL
2013-01-02 09:19:17 +11:00
rmackay9
52802cb29e
ArduCopter: limit output throttle to 800 only for TRI which does not have the new stability patch
2013-01-02 09:19:17 +11:00
rmackay9
3aca61cefb
AP_Motors: remove unnecessary opposite_motor array (no longer needed with new stability patch)
2013-01-02 09:19:17 +11:00
rmackay9
34e18ae12a
ArduCopter: increase accel based throttle PIDs and add D term to rate based throttle
2013-01-02 09:19:17 +11:00
rmackay9
41cc1c74d8
AP_InertialNav: increase time constant for Z axis to 7 seconds
2013-01-02 09:19:17 +11:00
rmackay9
ac8af9a53f
ArduCopter: Leonard Hall's changes to alt hold including adding low pass filter to climb rate
...
get_throttle_rate_stabilized changed to simply update the target altitude instead of talking directly to the rate controller.
get_throttle_althold changed to use sqrt of distance when calculating the desired rate towards the target altitude.
added reset of accel based throttle PID's I term.
unrelated small bug fix from Randy to allow CH6 tuning of throttle rate D term.
2013-01-02 09:19:17 +11:00
rmackay9
a76aec675a
AP_InertialSensor: resolved compile warning re uninitialised variable
2013-01-02 09:18:03 +11:00
rmackay9
90d7f00965
AP_GPS_MTK16: saved 22 bytes of ram by moving error message into program space.
...
Perhaps there's no point in writing an error message to a console that likely nobody will be viewing anyway.
2013-01-02 09:18:03 +11:00
rmackay9
811550cca6
AP_GPS_MTK19: small bug fix re "==" vs "="
...
Also saved 22 bytes of RAM by moving error message into program space.
2013-01-02 09:16:48 +11:00
rmackay9
f4c50353b9
ArduCopter: allow tuning of the Throttle Rate D term
2013-01-02 09:16:48 +11:00
