Commit Graph

4130 Commits

Author SHA1 Message Date
rmackay9 485cebf85c ArduCopter - bug fix to calc_XY_velocity (was using uninitialised last_longitutde and last_latitude for speed calculations) 2012-03-18 12:11:12 +09:00
Andrew Tridgell a122cfcfe0 fixed VARTest build 2012-03-18 13:34:40 +11:00
Andrew Tridgell f740f6e94d APM: removed some config file cruft
these options are now settable via MAVLink
2012-03-18 13:34:40 +11:00
Michael Oborne d3da61556e firmware build 2012-03-18 10:32:15 +08:00
Michael Oborne 64ba673ba4 APM Planner 1.1.53
add sensor rate telem
save autopan between sessions
modify connect hb requirement and param timeout
2012-03-18 10:29:55 +08:00
Michael Oborne 80b356367e update AP version to 2.30 2012-03-18 10:27:49 +08:00
Michael Oborne cabf09c378 firmware build 2012-03-18 09:18:32 +08:00
Michael Oborne daff75748e firmware build 2012-03-18 09:13:49 +08:00
Jason Short 27f276a066 ACM: Lowered gains from flight tests today with 3DR Quad 2012-03-17 11:04:01 -07:00
rmackay9 ed0d1da4f5 AP_Baro - added average filter for temperature to replace broken filter
- added average filter (for last two values) for raw pressure
        - changed some "long" to int32_t and "unsigned long" to uint32_t
2012-03-18 01:06:02 +09:00
Jason Short f6638d00d6 ACM: Smoother Speed calcs 2012-03-16 14:10:19 -07:00
Jason Short 09995aed62 ACM: Softer Loiter Gains 2012-03-16 14:10:19 -07:00
Jason Short 234a5dc65e ACM: Small fix to nav_throttle to prevent too fast of a landing. 2012-03-16 14:10:19 -07:00
Jason Short d52b93849e ACM: Fixed comment 2012-03-16 14:10:19 -07:00
Jason Short 1ecca36dd0 Fixed Scaling bug in Sonar mixing 2012-03-16 14:10:19 -07:00
John Arne Birkeland 55055fca2b ArduPPM V2.2.66
- Added APM2 (ATmega32U2) support for using TX and RX status leds to indicate PWM and PPM traffic

<RX><OFF> no pwm input detected
<RX><TOGGLE> speed of toggle indicate how many channels are active
<RX><ON> input lost (failsafe)
<TX><OFF> ppm output not started
<TX><FAST TOGGLE> normal PWM->PPM output or PPM passtrough failsafe
<TX><SLOW TOGGLE> PPM passtrough
2012-03-16 20:48:55 +01:00
Jason Short 0c6a87db3f ACM: Disabled D term experiment for Loiter until more testing 2012-03-15 19:20:03 -07:00
Jason Short ce14ef1b2b Tune down Loiter_P a hair 2012-03-15 19:17:27 -07:00
Robert Lefebvre 0bc40f51fb Small fix on the Traditional Helicopter Collective-Yaw compensation calculation. 2012-03-15 20:14:18 -04:00
rmackay9 eea8d67a1e ArduCopter - removed #define AUTOMATIC_DECLINATION ENABLED line to ensure users don't try and enable it because it needs a bit more work before it's ready for general use 2012-03-15 21:58:42 +09:00
analoguedevices eb530a2045 Rev'ed version number to 2.5. Added more credits 2012-03-15 02:38:54 +00:00
Michael Oborne 42960efe80 sitl cygwin mods 2012-03-15 08:16:50 +08:00
Michael Oborne 010f147fb2 APM Planner 1.1.52
add mag field strength - status tab "magfield"
modify param getting.
mag calibrate error checking
hazys - capm mod
2012-03-15 07:10:31 +08:00
Jason Short 59fb1f3542 ACM: Added constraints for invalid climb rates. Robert Lefebvre had a bad sonar and very invalid rates crept into the system. 2012-03-13 21:31:16 -07:00
Jason Short 50b4c07261 Lowering the D filter for less latency and less oscillation. 2012-03-13 12:58:46 -07:00
Jason Short 72d03a8046 ACM: Loiter tuning updates, turned up I a bit, a higher I will work better if the system is well tuned. 2012-03-13 10:23:31 -07:00
Jason Short 0edc1020ac ACM: Loiter D performance updates 2012-03-13 10:23:31 -07:00
Jason Short 6edad4d9ef ACM: Larger filter for Loiter D 2012-03-13 10:23:30 -07:00
Hazy 731a118467 APM Planner
fix detection of CAPM board
2012-03-13 20:26:45 +08:00
Chris Anderson aae9c20fc4 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-03-12 22:04:32 -07:00
Andrew Tridgell adcc20e4d3 Quaternion: credit Justin with the initial idea of using Madgwick
thanks Justin!
2012-03-13 13:27:45 +11:00
Michael Oborne 5ad90ac0cc APM Planner 1.1.51
revert posible camera issue
fix apc220 units rts issue
fix bluetooth comport issue - re andrew
cleanup startup test
2012-03-13 07:15:08 +08:00
Jason Short 953b93293e ACM: removing old define 2012-03-12 13:11:30 -07:00
Jason Short 580c5e109e ACM: Got the sign wrong. I'm using the derivative of the error now and not the sensor, so the sign was reversed. 2012-03-12 13:11:05 -07:00
Jason Short 38153f15e0 ACM: Made Loiter_D 0 by default. Accidentally left it on by default. 2012-03-12 10:37:15 -07:00
Andrew Tridgell 9a6adb9990 DCM: adjust yaw kp constant down to 0.4
this makes the time constant for compass errors closely match the
timing of the older releases - about 10 seconds for a 1 radian change
in heading
2012-03-12 17:49:26 +11:00
Andrew Tridgell aa408655f8 Compass: fixed the order of rotations in the compass driver
this should fix the massive heading issues that people have been
reporting. Please test!
2012-03-12 17:33:15 +11:00
Andrew Tridgell 0e6037322a AP_Declination: fixed build of test sketch 2012-03-12 17:33:15 +11:00
Jason Short 56d2b9ef05 ACM: Broke out the D term for the PID loop to add custom filtering. The current AC_PID filtering wasn't working for this application and we needed more smoothing. Bad pitch oscillations were being transmitted to the copter. 2012-03-11 23:21:49 -07:00
Jason Short 5c3cb1c5d0 ACM: removed Filtering code for motors in Quad for testing 2012-03-11 23:21:49 -07:00
Jason Short d9ccd4f6bd ACM: made same as Loiter I 2012-03-11 23:21:49 -07:00
Jason Short e279106b44 ACM: Tuning based on flights today 2012-03-11 23:21:49 -07:00
Jason Short 38a60df189 ACM: Rate_d filter for PID loop of Loiter. 2012-03-11 23:21:49 -07:00
Jason Short 2ac29effe9 ACM: The I term in update_nav_wp with the no_nav condition was pulling from the wrong PID loop and was essentially 0 all the time. 2012-03-11 23:21:49 -07:00
rmackay9 7cf635889d ArduCopter - Log.pde - added wrap_360 to compass heading field of ATT message to resolve overflow problem that caused heading to appear as being off by 70 degrees 2012-03-12 12:09:04 +09:00
Amilcar Lucas a203282779 correct small typos in comments 2012-03-11 21:30:09 +01:00
Andrew Tridgell 1e47ab26f2 AP_Declination: disable library when AUTOMATIC_DECLINATION is not ENABLED
unfortunately this library was causing avrdude to fail to load the hex
to my APM2. Until we work out why, it's disabled.
2012-03-11 21:46:41 +11:00
Andrew Tridgell 42a29169f0 SITL: added pgm_read_byte_far() 2012-03-11 20:59:47 +11:00
Andrew Tridgell b4d69ef473 AP_Declination: fixed usage of headers 2012-03-11 20:59:47 +11:00
Adam M Rivera ad3a20b6a3 AP_Declination: Updated comment.
Signed-off-by: Andrew Tridgell <tridge@samba.org>
2012-03-11 20:59:47 +11:00