9e36c13f9c
nightly check in, version not stable.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3164 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-23 20:36:30 +00:00
c140113583
Checkin before beddy byes
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3154 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-22 21:50:11 +00:00
f92e7323f5
Amilcar Lucas & Ritchie Wilson's camera code mixed in with ap_mount code, this needs to be separated.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3145 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 21:14:02 +00:00
2048d132b0
change of mind payloads should be split into their separate folders.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3144 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 19:58:15 +00:00
8c020108cb
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3143 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 19:55:54 +00:00
764619f6e7
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3142 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 19:33:32 +00:00
463dc4b533
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3141 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 18:49:42 +00:00
71725824e9
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3140 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 18:48:28 +00:00
3fa8b249e5
Payload libraries, code for things like camera control, mount control antenna control should go here.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3139 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-21 18:33:39 +00:00
9cdba838a6
removed AP_Common ref
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3102 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 19:27:40 +00:00
9336fa9bd1
upped D filter to 6
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3096 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-14 05:44:29 +00:00
eb8de79be4
Compass: added a gain multiplier
...
this adjusts the calibration based on the change in gain between
calibration and runtime
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3090 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 10:39:11 +00:00
69b6e5225a
added SET_MAG_OFFSETS magnetometer message
...
this allows reset of the mag offsets without wiping your EEPROM
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3088 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 09:00:21 +00:00
32c576f28c
Compass: several fixes to compass calibration code
...
this changes the calibration code to require at least 5 good reads
from the compass during initialisation. The calibration is taken as
the average of the 5 values.
This also fixes the expected values for the 3 axes for the 5883 to
match reality.
We also save a bit of code space by adding a common rotate_for_5883L()
routine.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3087 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 08:17:25 +00:00
5ffd66bc83
MAVLink: added missing files from recent update
...
thanks to Randy for spotting this
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3086 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 06:30:29 +00:00
1989497ae9
we don't have a separate 5883L driver any more
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3085 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 06:30:13 +00:00
9232a0f652
Compass: removed the old 5883L driver
...
we now use a single driver for both mags
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3083 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 05:09:58 +00:00
1dcd7a358e
PID: fixed an uninitialised variable
...
we did not initialise derivative to zero
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3082 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 04:46:21 +00:00
92822dbd6b
ModeFilter: fixed a shadowed variable
...
mode is a member of the class already, so call the local variable
fmode
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3081 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 04:46:10 +00:00
6205752740
MAVLink: pull in latest changes from upstream MAVLink
...
this gives us the new SENSOR_OFFSETS message for debugging sensor
calibration
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3080 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-13 04:45:48 +00:00
1d9bc92d41
Added a generic Sin and Cos look table. Not sure if it works yet as a library.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3075 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-11 22:31:15 +00:00
4f099ae158
cope with double initialisation of the compass
...
if we've already initialised, then the orientation matrix will already
be right
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3072 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 14:07:15 +00:00
2995878e99
compass: add a small delay in compass init
...
this adds a 50ms delay after setting the compass gains before reading
the compass. Added as paranoia after some strange results on a 5843
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3070 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-10 12:47:25 +00:00
998b00693c
AP_OpticalFlow - small but important fixes for position calcs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3040 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 13:19:18 +00:00
22d6499ef7
perl version of eedump
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3037 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-07 10:36:31 +00:00
1e4f463298
Updated GCS_MAVLink to match mavlink master.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@3017 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-08-05 08:18:08 +00:00
f951ffb602
IMU: fixed HIL init with callback
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2988 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 23:35:37 +00:00
22b5eb4273
GPS: added delay hook for GPS detection
...
this allows for MAVLink to be up during GPS detection
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2987 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 22:34:37 +00:00
28cf3dfc79
IMU: added delay callback hooks to IMU initialisation
...
this allows the imu init() call to use a custom replacement for
delay(), which will allow for the processing of MAVLink packets during
IMU initialisation
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2986 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 22:34:25 +00:00
f096d8cb23
OpticalFlow - add check to see if sensor has initialised correctly.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2974 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-31 04:31:36 +00:00
e63fc0fe68
removed scaling on control in because it might cause rounding issues.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2969 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:48:38 +00:00
e32f8057bb
Reworked the filtering algorithm based on Maxbotics recommendations to use a Mode filter
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2968 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 23:34:25 +00:00
ebf1697158
Reworked the filtering algorithm based on Maxbotics recommendations to use a Mode filter
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2965 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:35:36 +00:00
39677e7e66
Added some missing functions needed to get HIL to compile
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2964 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:34:23 +00:00
5c3837757a
Added ability to grab an unfiltered value from the ADC
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2963 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 20:33:45 +00:00
74edb558f4
GPS: fixed the GPS specific test programs
...
This fixes the build
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2962 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-30 08:48:17 +00:00
7026405951
Changed the PID derivative filter to a moving average with 4 samples. Having great luck with it and High kD when using noisy sensors.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2957 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-29 21:52:37 +00:00
1dc0063e67
HIL: fixed radio_status in setHIL() for APM_RC
...
thanks to Michael Oborne for noticing this!
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2952 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-28 12:11:25 +00:00
b930b892c2
DataFlash library - changed to use standard arduino SPI library
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2928 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-19 23:00:18 +00:00
ab8d8fedb9
AP_OpticalFlow - fixes to position calculations (lat was reversed and would calculate position even with surface quality was very low)
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2913 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 21:51:27 +00:00
5c3113955d
doubled Slew rate limiter to 2 m/s max @ 10 hz.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2912 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 18:18:47 +00:00
f915eb7052
GPS-HIL: set new_data on setHIL()
...
this fixes navigation for ACM in HIL
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2909 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-18 12:42:36 +00:00
de76785499
Added a slew rate limit
...
reworked filter, same results, just wanted to get rid of modulus.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2900 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-17 19:05:18 +00:00
c22ebd22b4
compass: fixed a compiler warning
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2844 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 09:10:24 +00:00
d71ed55596
build: added EXTRAFLAGS to make rules
...
this allows you to create a local makefile like this:
include Makefile
hil:
make -f Makefile EXTRAFLAGS="-DHIL_MODE=HIL_MODE_ATTITUDE -DSERIAL3_BAUD=115200"
and then use 'make hil'
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2843 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 09:07:09 +00:00
f6e5825349
Cleaned up or reverse code.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2842 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-13 05:54:40 +00:00
db2e139812
fixed 5843 detection code
...
we were looking for the wrong regA value
Thanks to Chris for the debugging help! (and happy birthday!)
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2828 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 22:27:15 +00:00
ddb823829d
compass: added error checking on I2C transactions
...
this adds error checking to all operations on the compass, to ensure
that we don't accept invalid data
This also fixes the calibration values for the 5883L to match the
recommended values in the spec
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2815 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 12:10:00 +00:00
a45c33727a
mavlink: fixed a signed/unsigned warning
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2814 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-09 12:09:50 +00:00
d18262b729
Added heavily filtered Accelerometer values for experimentation.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2779 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:58:19 +00:00
ce7dc48026
added ki_Yaw private variable and accessors.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2778 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:57:12 +00:00
8a0843e69a
Added a limit to the atan function to calc the heading. Just trying to avoid, bad values screwing up the DCM. - Jason
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2777 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-08 03:56:04 +00:00
45e57a0639
Commit test - just adding an unneeded comment
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2740 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 19:39:55 +00:00
02351bd23a
compass: fixed normal operation mode change for 5883L
...
We need to set the right rates after config too. Thanks to Randy for
spotting this one
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2737 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 12:00:45 +00:00
cde84445b3
compass: fixed output rate and averaging for 5883L
...
we need to setup the right output rate, or the compass gets very laggy
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2736 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-03 08:32:58 +00:00
8fcceaa919
AP_Compass: fixed calibration of 5883L compass
...
this fixes a compass initialisation bug where if the first value from
the compass isn't in the right range we would set bad calibration
scaling factors.
This also changes the maximum acceptable calibration values to 2000,
which is needed for the 5883 compass
pair-programmed-with: Randy Mackay
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2718 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:38 +00:00
e9bb030fd4
AP_Compass: report compass initialisation failure
...
don't just put out rubbish values
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2717 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-02 11:31:27 +00:00
fd2547216d
AP_Compass_test - added display to auto detected compass
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2716 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-07-01 16:26:27 +00:00
98632a97c0
temporally revert to prior version of Sonar class to narrow in on a bug.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2708 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-30 22:32:26 +00:00
f7ba02f825
AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2700 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:47:53 +00:00
151aa5d415
AP_Compass - added auto detect of 5843 vs 5883L to AP_Compass_HMC5843 class
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2699 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-28 16:30:42 +00:00
db0e5760a4
removed redundant FP calcs for speed up.
...
added ability to alternate normalization and drift correction. Not fully implemented, needs further testing.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2691 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 22:54:08 +00:00
ebfb132f34
IMU speedup by shorting the temp calculation. If someone bothers to temp calibrate their sensors, they'll need to edit this shortcut.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2677 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-26 06:23:22 +00:00
569087199d
Add a simple tool for dumping AP_Var data from an EEPROM dump.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2676 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-25 07:56:38 +00:00
6959c2d6f9
Added debug/ upload targets to Arduino.mk
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2656 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 21:36:20 +00:00
f2457c94d9
Added config.mk file inclusion for global configurations settings on make based builds. See ArduPilotOne for scripts/configure to see an example. config.mk should be located in the temporary directory where the rest of the build results are placed.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2655 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-23 19:01:06 +00:00
8ab94794cd
Enable map file generation.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2636 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-22 05:54:55 +00:00
71d4015bc8
revert gps lib to 2602
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2608 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:38:31 +00:00
b99362dc18
remove static declaration from idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2607 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:26:57 +00:00
8a35079907
clean up idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2606 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-21 01:20:39 +00:00
0a0c6f9c26
Fix initialization of idleTimeout
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2602 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 21:11:45 +00:00
d090f92b66
Vector3<T>() { x = y = x = 0; }
...
changed to :
Vector3<T>() { x = y = z = 0; }
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2600 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-20 16:31:31 +00:00
b70d2d4c29
update to Baro lib to remove temp filtering.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2569 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-18 05:08:48 +00:00
3c27be40fc
silly formatting
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2566 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:43:43 +00:00
16d1e5d0b8
removed some initial settings
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2565 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:35:11 +00:00
350b2c5ea2
added optimization note
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2564 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:34:23 +00:00
dafe217178
made timeout public, settable
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2563 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:33:08 +00:00
cb7da41e55
removed duplicate filter from ADC based input
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2562 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-16 16:30:37 +00:00
60ae24dca6
disable the re-ordered initialisation warnings
...
these are not useful for us, and will always happen with our parameter
code
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2561 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:10 +00:00
24491fce74
fixed warnings in PID.h
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2560 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:25:00 +00:00
88b00edaf3
fixed warnings in AP_DCM
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2559 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:51 +00:00
439b65324d
fixed a warning in AP_Var.h
...
index is in system headers as a string function
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2558 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-15 12:24:40 +00:00
153c166ef3
Based on Doug's recommendation - increased Accel weighting to .66 – 1.33 Gs
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2557 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 23:37:43 +00:00
e63fe14ce7
the temp change in the state machine didn't really help the altitude issue after all. Need more testing as the temp sway is the major factor in the lack of air pressure accuracy.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2556 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 15:46:38 +00:00
ab6bafbd5c
reworked filter on temperature.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2554 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 05:08:11 +00:00
65e161cbfb
removed filter on temp, was causing init problems.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2553 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-14 04:51:07 +00:00
d2330b4239
Adjusted the state machine to read the temperature less often (from twice a second to every 4 seconds). Added a small smoothing filter.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2552 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 23:57:36 +00:00
65345160d1
Implemented moving average filter to deal with noise issues on quads, default is a 6 member filter.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2551 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 23:50:15 +00:00
b07c32acd0
Added dynamic setting of kp_rollpitch, ki_rollpitch, kp_yaw.
...
Added three constants for kp_rollpitch, (high, med -default, low)
Functionally equivalent to prior version.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2550 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 23:49:01 +00:00
4d6637389a
Add a method to BetterStream and FastSerial that can be used to report
...
the amount of data that can be written without blocking.
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2549 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-12 22:26:39 +00:00
8b18bd3481
Add clearOverride message to allow failsafe recovery from joystick control
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2540 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-11 23:59:35 +00:00
13203fd211
RC_Channel.h - small change to store _reverse setting to eeprom
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2528 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-10 03:33:31 +00:00
b640e7b68c
AP_Compass - added support for HMC5883L
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2461 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-01 13:21:20 +00:00
9b1be05369
AP_Compass - added support for HMC5883L
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2460 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-06-01 13:16:18 +00:00
65cb8d6bdb
AP_OpticalFlow - moved chip select pin so it doesn't interfere with AP_ADC
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2452 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-31 13:46:56 +00:00
530eeb4184
Fix bug for GCS joystick control
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2440 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-30 03:44:07 +00:00
5d5b51cbe6
Change setHIL to return a bool based on if GCS joystick control is active
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2423 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-27 23:15:29 +00:00
dd510e68ae
http://code.google.com/p/arducopter/issues/detail?id=161
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2395 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-24 05:17:12 +00:00
4017bb39d1
AP_OpticalFlow - fixed some bugs in get_position
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2380 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-22 14:44:51 +00:00
886032141a
Synced with mavlink dev branch, RC_CHANNELS_OVERRIDE packet added.
...
git-svn-id: https://arducopter.googlecode.com/svn/trunk@2344 f9c3cf11-9bcb-44bc-f272-b75c42450872
2011-05-18 03:24:31 +00:00
joeholdsworth@gmail.com
jasonshort
tridge60@gmail.com
rmackay9@yahoo.com
mich146@hotmail.com
james.goppert
deweibel@gmail.com
DrZiplok