Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
5,447 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

5447 Commits

Author SHA1 Message Date
Andrew Tridgell 59b44816ec GPS: replaced the GPS auto-detect mechanism 
the old mechanism wasted most of the input bytes, and chewed a lot of
CPU, making it impractical to do GPS detection for a GPS attached
after startup

The new code is async, and detects a GPS by looking for a fully formed
packet with the right checksum for each GPS type
 2012-09-17 14:45:47 +10:00
Andrew Tridgell 7e8ef0ae95 APM: fixed handling of DO_REPEAT_SERVO and DO_REPEAT_RELAY 2012-09-17 14:45:47 +10:00
rmackay9 6f32f52377 ArduCopter: bug fix in Log_Read_Attitude. It was printing two uninitialised variables. 2012-09-17 13:44:29 +09:00
Andrew Tridgell c8e84d18a4 APM: tidy up a comment 2012-09-16 15:51:13 +10:00
Andrew Tridgell c0798730a8 APM: only copy manual channels in failsafe 
this prevents non-manual channels changing value away from the trim
value on startup
 2012-09-16 15:51:01 +10:00
Andrew Tridgell 8620a036de RC_Channel_aux: minor cleanups 
remove unused enable_out_ch() and enable k_manual channels. This
ensures k_manual channels used for bottle drop are initialised
correctly to trim output
 2012-09-16 15:50:13 +10:00
Andrew Tridgell 127117b640 APM: ensure DO_SET_SERVO channels are enabled 2012-09-16 15:08:14 +10:00
Andrew Tridgell 208b878988 APM: allow update of last waypoint 
fixed off by one error
 2012-09-16 15:06:26 +10:00
Andrew Tridgell bd31f340a7 RC_Channel: support channel reversal on range channels 
this makes it possible to have a reverse throttle in ArduPlane
 2012-09-16 15:06:26 +10:00
rmackay9 303ca11c4c HIL: changes to fix HIL for ArduCopter after recent timing changes. 
Changes include using AP_PeriodicProcess and calling imu.init even in HIL mode
 2012-09-15 18:42:56 +09:00
Michael Oborne 94f956a0ca fix AP attitude hil - with randys help 2012-09-15 16:47:18 +08:00
rmackay9 b6d2d4723f ArduCopter: print firmware version of code instead of zero. 2012-09-13 21:49:11 +09:00
rmackay9 9e66b555cb ArduCopter: removed INSTANT_PWM from ArduCopter and AP_Motors library 2012-09-13 21:31:13 +09:00
rmackay9 1c9fe3b1b6 AP_AHRS: fix to allow example sketch to compile 2012-09-13 16:45:52 +09:00
Hazy 8cc79d50cb APM Planner 
a few UI translations
 2012-09-13 15:27:38 +08:00
Jason Short 072085d2d8 ACM : better debugging text 2012-09-12 23:06:06 -07:00
Jason Short 6b6075ed30 ACM l Prevent pre-mature finish of mission 2012-09-12 23:06:06 -07:00
Michael Oborne 5b80ffcc16 firmware build 2012-09-13 10:36:43 +08:00
Andrew Tridgell b55e7903aa APM: prepare for 2.62 release 2012-09-13 12:02:18 +10:00
Andrew Tridgell bad73b0686 APM: fixed elevon mixing 
this was broken in 2.61
 2012-09-13 12:01:40 +10:00
Andrew Tridgell 6e9abb616a APM: show real raw RC input, not mixed input 
this makes it easier to diagnose elevon mixing issues
 2012-09-13 12:00:49 +10:00
Andrew Tridgell ba9543ee04 GPS: NMEA bug fix from Alexey Kozin 
thanks Alexey!
 2012-09-12 15:04:24 +10:00
Andrew Tridgell fba1692d69 AHRS: added AHRS_BARO_USE parameter 
allow disabling of the use of the barometer for vertical acceleration
compensation
 2012-09-12 14:42:04 +10:00
Andrew Tridgell 589c8fcc12 APM: report throttle and ground speed mission changes 2012-09-12 13:09:32 +10:00
Andrew Tridgell b1408008c9 APM: allow for landing pitch control until final stage 2012-09-12 13:09:16 +10:00
Andrew Tridgell 05e72c6e68 APM: fixed roll in landing approach 2012-09-12 11:53:17 +10:00
Andrew Tridgell 5f3ffe4839 APM: switch to Randys new IMU rate control method 
this drives the speed of the 50Hz loop by the number of samples
accumulated in the IMU. This should give much more consistent timing
in DCM.

Thanks to Randy for introducing this scheme in ArduCopter!
 2012-09-11 16:39:36 +10:00
Jason Short 834f961409 ACM : Fix enduf 2012-09-10 21:25:53 -07:00
Jason Short 4c8e257ea2 ACM : forced setup_show to dump params during log dump for better analysis. 2012-09-10 20:52:30 -07:00
Andrew Tridgell 7e672628ea APM: removed the GPS_enabled flag 
this fixes using GPS_PROTOCOL to specify a specific GPS with a GPS
that takes a few updates before it works (eg. needing baud rate
changes).

This makes it easier to use an APM1-1280 with more features enabled
 2012-09-11 13:37:34 +10:00
Andrew Tridgell c9a299665c APM: added speed scaling to wheeled steering 
this allows for a larger amount of steering control at low speeds
without causing osciallation after takeoff
 2012-09-11 13:37:34 +10:00
Jason Short 34e07c826f ACM : Added centralized Iterm logging at a lower rate. Logs all iterms. 2012-09-10 20:26:48 -07:00
Jason Short e8e8c27db4 ACM Mavlink - fixed comparison of unsigned to signed int by casting to uint8_t 2012-09-10 20:22:57 -07:00
Jason Short a73bc70553 ACM : Params - formatting cleanup 2012-09-10 20:22:11 -07:00
Andrew Tridgell b787dc8cce APM: added wdt.h for SITL build of APM 2012-09-10 15:52:53 +10:00
Andrew Tridgell 841d2700b6 ACM: use spare CPU cycles to read the magnetometer 2012-09-10 11:38:18 +09:00
rmackay9 9f1033dc42 AP_InertialSensor_Stub: added num_samples_available method to fix HIL build 2012-09-10 11:38:13 +09:00
rmackay9 130f3b0030 AP_InertialSensor_MPU6000: move _last_sample_time_micros to capture time data_interrupt was called 2012-09-10 11:38:08 +09:00
rmackay9 7a265dbf61 AP_InertialSensor: use AP_TimerProcess's queue_process to run read from MPU6000 after any currently running processes complete 2012-09-10 11:38:03 +09:00
rmackay9 55ef1e0a29 AP_PeriodicProcess: queue_process changes to suspend other processes before running queued process 
Also restored suspend_timer to void return type
 2012-09-10 11:37:58 +09:00
rmackay9 fd110a2723 ArduCopter: modified mainloop timing to be in sync with the arrival of new data from the IMU. 
This reduces the maximum delay between when new sensor data arrives and when it is actually used by about 5ms.
 2012-09-10 11:37:53 +09:00
rmackay9 42406c827a ArduCopter: added NUM_IMU_SAMPLES_FOR_XYZHZ definitions for MPU6000 and Oilpan to allow more syncing of the mainloop with the arrival of data from the IMU. 2012-09-10 11:37:48 +09:00
rmackay9 6ea5c21f7c AP_ADC: added num_samples_available to allow main loop to be synced with arrival of new sensor data for Oilpan. 2012-09-10 11:37:43 +09:00
rmackay9 fc4ff007e6 AP_IMU: added num_samples_available to allow main loop timing to be synced with arrival of new data from IMU. 2012-09-10 11:37:38 +09:00
rmackay9 0a6219695b AP_InertialSensor: changed read of sensor from MPU6000 to happen immediately 
This reduces the delay between when data arrives and when it is used
by up to 1ms.

Added num_samples_available method to all InertialSensors to allow
main loop timing to be synced with sensors.
 2012-09-10 11:37:33 +09:00
Andrew Tridgell 0812fc4890 APM: reboot only works on the APM2 2012-09-10 11:50:48 +10:00
Andrew Tridgell cb88681914 APM: added support for MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN 
this allows for remote reboot of APM
 2012-09-10 11:42:30 +10:00
Andrew Tridgell e2779523ea APM: fixed fetch of relative altitude waypoints 
when we fetch relative altitude waypoints from APM to a file, we need
to preserve the altitude
 2012-09-10 09:40:29 +10:00
Craig Elder 90b74f5bab APM_RC: fixed noisy PWM output on startup for APM2 
This reduces the number of rubbish pulses on the APM2 PWM output pins
on startup, which should help with booting some cheaper ESCs.

Thanks to Randy for the idea!
 2012-09-10 08:09:28 +10:00
rmackay9 5d3ddf1fc9 ArduCopter: bug fix for ROI not working if user did not have a camera mount 
Changed verify_nav_roi command to attempt to point at the target if our camera mount type is not pan_tilt nor pan_tilt_roll
 2012-09-10 02:03:32 +09:00