Peter Barker
|
47716e2338
|
hwdef: remove stray HAL_BUILD_AP_PERIPH defines
this is added by defaults_periph
|
2024-04-03 18:36:29 +11:00 |
|
Peter Barker
|
5fb4e1e285
|
hwdef: replace defined(HAL_DISABLE_LOOP_DELAY) with HAL_SCHEDULER_LOOP_DELAY_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Peter Barker
|
994c268644
|
AP_HAL_ChibiOS: replace HAL_NO_RCIN_THREAD w/HAL_RCIN_THREAD_ENABLED
|
2024-04-03 18:36:29 +11:00 |
|
Peter Barker
|
416f7d393a
|
hwdef: remove DISABLE_SERIAL_ESC_COMM AP_Periph boilerplate
... use the defaults file instead
|
2024-04-02 11:28:27 +11:00 |
|
bugobliterator
|
9919af69bc
|
AP_HAL_ChibiOS: add config to enable sccripting on CANMod
|
2024-02-07 18:31:02 +11:00 |
|
bugobliterator
|
5bd5aa87a7
|
AP_HAL_ChibiOS: add CubeNode pinout diagram
|
2023-11-01 14:18:02 +00:00 |
|
Andrew Tridgell
|
ea51aea2e5
|
hwdef: removed most CAN_APP_NODE_NAME defines
both bootloader and AP_Periph now default to
"org.ardupilot.BOARD_NAME". This makes it much easier to find the
right firmware for update
|
2023-09-06 11:21:51 +10:00 |
|
Tom Pittenger
|
8bddd4168b
|
AP_HAL_ChibiOS: update hwdefs for eth
|
2023-08-06 09:20:08 +10:00 |
|
bugobliterator
|
f84572a545
|
AP_HAL_ChibiOS: remove legacy define WATCHDOG_DISABLED
|
2023-08-06 09:20:08 +10:00 |
|
bugobliterator
|
5c657cad9a
|
AP_HAL_ChibiOS: disable AP_Periph_Heavy for CubePilot-CANMod
|
2023-08-06 09:20:08 +10:00 |
|
bugobliterator
|
7bdee92d77
|
AP_HAL_ChibiOS: disable CAN2 on CubePilot-CANMod
|
2023-08-06 09:20:08 +10:00 |
|
bugobliterator
|
4e39318920
|
AP_HAL_ChibiOS: disable watchdog on CubePilot-CANMod
|
2023-08-06 09:20:08 +10:00 |
|
bugobliterator
|
50ae1ca7e8
|
AP_HAL_ChibiOS: update CubePilot-CANMod to support Networking
|
2023-08-06 09:20:08 +10:00 |
|
bugobliterator
|
4d2b7bb7c9
|
AP_HAL_ChibiOS: add CubePilot CAN Module hwdef
|
2022-10-12 18:28:52 +11:00 |
|