Andrew Tridgell
73dcbc24c3
Quaternion: we no longer support acceleration in the GPS driver
...
remove the linear acceleration compensation code
2012-08-15 20:07:53 +10:00
Andrew Tridgell
2d47bd0386
GPS: support getting raw velocity values from a UBlox
...
this may give better velocity numbers than the value from COG
2012-08-15 20:06:35 +10:00
Andrew Tridgell
c960db7af5
APM: allow for separate calibration of airspeed/barometer
...
this is useful just before takeoff, to account for temperature changes
2012-08-15 19:49:09 +10:00
Andrew Tridgell
ad73c229ab
APM: added LAND_FLARE_ALT and LAND_FLARE_SEC
...
these allow you to configure the altitude and time before touchdown to
flare the plane and lock the heading. Useful on larger planes.
2012-08-15 18:11:16 +10:00
Andrew Tridgell
1252ddfe0c
APM: rename RDRSTEER to WHEELSTEER
...
thanks to Jon for the suggestion
2012-08-15 16:28:59 +10:00
Andrew Tridgell
ffbd229841
APM: use AHRS position for geo-fence
...
this allows it to take account of dead-reckoning
2012-08-15 14:31:10 +10:00
Andrew Tridgell
a6327e254c
SITL: use rudder steering in APM autotest
2012-08-15 12:53:05 +10:00
Andrew Tridgell
df3c8a5bc0
APM: when land_complete is true, use land_pitch
...
this gives a flare on final landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell
2d7fcbd14b
APM: reload airspeed and throttle after landing
...
this allows for restarting a mission after landing with reasonable
airspeed values
2012-08-15 12:39:35 +10:00
Andrew Tridgell
47be6d8ad1
AP_Airspeed: remove airspeed filter and run at 10Hz
...
this saves on the filter memory, and gives just as good a result
2012-08-15 12:39:35 +10:00
Andrew Tridgell
a4b1b9f0a4
AP_AnalogSource: make read_average() return a float
...
this allows it to take advantage of better than 1 bit resolution by
averaging
2012-08-15 12:39:35 +10:00
Andrew Tridgell
e26e8b3b67
APM: added RDRSTEER_ PID for steering on ground
...
this allows for rolling takeoff with steering, and use of rudder in
landing
2012-08-15 12:39:35 +10:00
Andrew Tridgell
52064772ee
APM: report speed changes via MAVLink
2012-08-15 12:39:35 +10:00
Andrew Tridgell
817017658d
APM: implement FENCE_ACTION_REPORT
...
when FENCE_ACTION is set to FENCE_ACTION_REPORT a fence breach is
reported, but the flight mode is not changed
2012-08-15 12:39:35 +10:00
Andrew Tridgell
299711f4a9
MAVLink: added FENCE_ACTION_REPORT
2012-08-15 12:39:35 +10:00
Andrew Tridgell
9b4b7997b6
AHRS: added ahrs.yaw_initialised()
...
this allows the high level code to know if the AHRS driver has a
reliable yaw estimate
2012-08-15 12:39:34 +10:00
Andrew Tridgell
533aab4f66
SITL: added a test script for starting in Kingaroy
...
we use this for OBC testing
2012-08-15 12:39:34 +10:00
Andrew Tridgell
8cb55eb75a
APM: keep the time of the last heartbeat message
...
this will be used for failsafe processing
2012-08-15 12:39:34 +10:00
Andrew Tridgell
0584017aff
APM: expose change_command() and geofence_breached() to libraries
...
this makes a failsafe library easier
2012-08-15 12:39:34 +10:00
Andrew Tridgell
ff6301fb46
APM: show waypoint number in jump message
2012-08-15 12:39:34 +10:00
Andrew Tridgell
92bdc23ab6
APM: minor formatting fix
2012-08-15 12:39:34 +10:00
Andrew Tridgell
b6b12532da
SITL: make it easier to start ArduPlane SITL at any location
...
this generates a jsbsim startup XML file from a template
2012-08-15 12:39:34 +10:00
Andrew Tridgell
2865434d02
APM: added 'OBC' failsafe module for ArduPlane
...
this adds FS_* parameters for setting up APM to follow the outback
challenge failsafe rules.
This includes:
- manual pin
- heartbeat pin
- waypoint for heartbeat failure
- waypoint for GPS failure
2012-08-15 12:39:34 +10:00
Andrew Tridgell
5631b90222
APM: interpret zero lat/lng as being current location
...
this makes it easy to have a "loiter in current position" mission
element
2012-08-15 12:39:34 +10:00
Andrew Tridgell
93f1d5645b
APM: fixed LOITER_TIME and LOITER_TURNS
...
These now follow the mavlink spec. Loiter time is in seconds, and
loiter turns is now 32 bit angle, so can handle larger numbers of
turns.
2012-08-15 12:39:34 +10:00
Andrew Tridgell
57cc89b730
Failsafe: only read RC on new data
2012-08-15 12:39:33 +10:00
Andrew Tridgell
09da478456
Failsafe: added COMPETITION_MODE
2012-08-15 12:39:33 +10:00
Andrew Tridgell
ecd3c58529
Failsafe: prototype of APM2 based failsafe system
2012-08-15 12:39:33 +10:00
Jason Short
f1af837543
ACM: Switched to filtered loc
2012-08-14 14:11:52 -07:00
Jason Short
cdd2093a4c
ACM: Switched to filtered_loc for distance calcs
2012-08-14 14:11:52 -07:00
Jason Short
a4bc5950cf
ACM: Added a filtered version of Location for GPS lag.
...
I did this because when you are close to a WP the Yaw angle can go a bit wacky as the location jumps around. The filtered loc is only used in the wp_distance calculation now.
2012-08-14 14:11:51 -07:00
Jason Short
993c89c4f8
ACM: Revved the version
2012-08-14 14:11:51 -07:00
rmackay9
2a83f1eef2
ArduCopter: remove RTL_LAND parameter as it's been deprecated in favour of APPROACH_ALT.
...
Updated comments on ALT_HOLD_RTL and APPROACH_ALT to make it a little easier to understand.
2012-08-14 12:14:35 +09:00
rmackay9
6603e7724d
AutoTest: set RTL's APPROACH_ALT to zero to force the copter to land instead of hanging out at 2m and causing the auto test to time out
2012-08-14 12:03:32 +09:00
rmackay9
c574393995
AutoTest: update failsafe timeout to 180 to give it more time to pass.
2012-08-14 11:25:10 +09:00
Pat Hickey
99e96031f2
APM_RC_APM2: updated comments for clarity
2012-08-13 15:34:17 -07:00
rmackay9
26d83791db
ArduRover: deleting this. Please see APMRover2 for latest Rover code.
2012-08-14 00:31:50 +09:00
rmackay9
db59065d26
ArduRover: latest rover code is in APMRover2 directory
2012-08-14 00:31:12 +09:00
rmackay9
cf943255a5
AP_RC_Channel: deleted this library as nobody seems to be using it.
...
Everyone is using RC_Channel instead which includes parameters.
2012-08-13 16:36:10 +09:00
rmackay9
35e7a6e018
GPS_IMU: deleted this empty library as nobody seems to be using it.
2012-08-13 16:35:29 +09:00
rmackay9
59cb6e5dba
Waypoints: deleted this library as nobody seems to be using it.
2012-08-13 16:35:08 +09:00
rmackay9
62c3ea9ea1
Trig_LUT: deleted this library as nobody seems to be using it
2012-08-13 16:34:50 +09:00
rmackay9
004c8bd5ed
AP_EEPROMB: deleted this library as nobody seems to be using it.
2012-08-13 16:34:33 +09:00
rmackay9
3482f05b48
APM_RC: rename example sketch directories for APM2 so they can be opened easily from arduino ide
2012-08-13 11:50:53 +09:00
Andrew Tridgell
48e275e22d
AHRS: avoid a compiler bug in quaternion code
...
Having _wind in the AP_AHRS class causes a register allocation error
when building the Quaternion code with some versions of avr-gcc. Quite
bizarre.
2012-08-13 11:08:10 +10:00
Jason Short
b01a71c4b9
ACM: Toy mode updates - added second toy mode
2012-08-11 22:37:27 -07:00
Jason Short
8160aa6103
ACM : Toy mode updates
2012-08-11 22:37:27 -07:00
Jason Short
1e0ab8768e
ACM: Toy mode updates
2012-08-11 22:37:26 -07:00
Jason Short
b27c1ce396
ACM : Added check for second Toy mode
2012-08-11 22:37:26 -07:00
Jason Short
11b7475ff9
ACM : Added CH7 multimode triggers, split Toy mode into two
2012-08-11 22:37:26 -07:00