Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,810 Commits 71 Branches 509 Tags 814 MiB
Commit Graph

4810 Commits

Author SHA1 Message Date
Jason Short 16adaf12db Arducopter 
increased landing authority
 2012-07-18 22:57:10 -07:00
Jason Short 1595a662c0 Arducopter 
removed old Var
 2012-07-18 22:57:10 -07:00
Jason Short c0a0e834e5 Arducopter: 
Loiter unlimited can now travel to a WP and then loiter.
set_altitude for landing now set to 0
 2012-07-18 22:57:10 -07:00
Jason Short 5f7c5ff387 Arducopter: Altitude change nav 
Split altitude hold into two controls to parallel navigation.
 2012-07-18 22:57:10 -07:00
Jason Short f40d8f04af Arducopter: New Alt control code 
Uses a new method to manage altitude changes. Alt hold controller was split into a hold and a rate controller just like navigation. Changing alt is done by specifying a climb rate.
Interactive alt hold is now simplified and is an 80cm climb or descent.
 2012-07-18 22:57:10 -07:00
Jason Short 806663b80b Arducopter: Flip mode 2012-07-18 22:57:10 -07:00
Jason Short 3a11a7596a Arducopter: Flip mode 
Flip mode graduates
 2012-07-18 22:57:10 -07:00
Jason Short 095a9c5c96 Arducopter: Flip mode 
Flip mode graduates to pre-compiled option
 2012-07-18 22:57:10 -07:00
Jason Short c5d3620d2b Arducopter: INS 
updated Nav control to use INS
 2012-07-18 22:57:10 -07:00
Jason Short 4c44dda7e8 Arducopter: INS 
removed calibrate accels for now
 2012-07-18 22:57:10 -07:00
Jason Short f56e1582a2 Arducopter: INS 
Updated INS gains
 2012-07-18 22:57:10 -07:00
Jason Short 02f1695991 Arducopter: INS 
removed IMU test, updated INS test to include normalized gravity accel vector.
 2012-07-18 22:57:10 -07:00
Jason Short 0ea3424779 Arducopter: INS 
removed zero accells call
 2012-07-18 22:57:10 -07:00
Jason Short 8a4a9a929e Lead Filter: simplified calculation 2012-07-18 22:57:10 -07:00
Andrew Tridgell f704408094 GPS-UBlox: removed duplicate config messages 
these were left over from debugging
 2012-07-19 15:23:15 +10:00
Jeff Taylor c083ca5f35 APM: Fixed bug where landing_pitch wasnt initialized properly 
this adds a new LAND_PITCH_CD parameter to control the landing pitch
when an airspeed sensor is not being used
 2012-07-19 13:59:30 +10:00
Andrew Tridgell 2121491197 APM: rename airspeed_cruise to airspeed_cruise_cm to make the units clearer 
it is in cm/s, not m/s
 2012-07-19 11:50:41 +10:00
Andrew Tridgell 2673179075 APM: Use g.airspeed_cruise for turn rate calculation if the airspeed sensor is disabled. 
This gives our best approximation for auto flight
 2012-07-19 11:50:41 +10:00
Jonathan Challinger 3c4f971618 APM: Removed unused YAW_DAMPENER code. 
YAW_DAMPENER was defined as zero
 2012-07-19 11:50:21 +10:00
Jonathan Challinger 87c78cff5e APM: Removed incorrect nav_gain_scaler from nav_roll calculation. 
nav_gain_scaler was originally added due to a perceived improvement in
loiter performance, but is incorrect for navigation. Turn rate is a
function of airspeed and bank angle, ground speed has no effect on
that.
 2012-07-19 11:50:06 +10:00
Amilcar Lucas 504809d146 ArduPlane parameters: re-order the files, looks like the second file gets ignored :( 2012-07-18 22:52:17 +02:00
Amilcar Lucas 13fb2e6dc9 RC_Channel parameters: Fix a typo 2012-07-18 22:39:49 +02:00
Amilcar Lucas 61f0cd15be ArduPlane parameters: Add base class info as well 2012-07-18 22:39:49 +02:00
Amilcar Lucas d911e4f61e Support up to 11 servos in APM2 
Conflicts:

	ArduPlane/ArduPlane.pde
 2012-07-18 22:01:19 +02:00
Amilcar Lucas dea5b88379 Support up to 7 aux servo outputs 2012-07-18 21:58:22 +02:00
rmackay9 fed92cc979 ArduCopter: small bug fix to radio.pde to allow code to compile when MOUNT == DISABLED 2012-07-18 23:49:41 +09:00
rmackay9 6ca8fda76d ArduCopter.pde: added call to set_manual_rc_channel to allow pilot's channel 6 to control pitch. 
This initialisation code should be moved to init_ardupilot and/or into the AP_Mount library.
 2012-07-18 23:49:09 +09:00
rmackay9 a2e6af1f9c AP_Mount: added set_manual_rc_channel and set_manual_rc_channel_function to allow input of pitch, roll and yaw controls from a regular RC_Channel (i.e. not RC_Channel_aux) 
For now, angles red in are always of the range -45 deg ~ 45 deg which is consistent with the existing arducopter implementation but should be improved to scale the pilot's input to the mount's actual range.
 2012-07-18 23:20:05 +09:00
Amilcar Lucas 6d48b597e5 Merge branch 'master' of https://code.google.com/p/ardupilot-mega 2012-07-18 02:12:58 +02:00
Amilcar Lucas 8acc432084 Replace long with int32_t 2012-07-18 02:12:31 +02:00
Amilcar Lucas f5c2ffca34 Use ascending order in the values 2012-07-18 02:11:49 +02:00
Michael Oborne 45609b3e6f fix rc libray param gen 2012-07-18 07:03:39 +08:00
Amilcar Lucas 23f009f665 Improve parameter documentation, it still does not work, but is an improvement. 
I just do not understand why these parameters do not appear in Mission planner :(
 2012-07-17 23:32:30 +02:00
Andreas M. Antonopoulos 5c6b22dbd0 param_parser: input validation bug fix 2012-07-16 23:37:13 -07:00
Andreas M. Antonopoulos 5917928bdc AP_Limits: documentation bug (which uncovered a param_parser bug - the irony burns) 2012-07-16 23:35:11 -07:00
Jonathan Challinger e271f97b53 Changed mavlink GLOBAL_POSITION_INT.relative_alt message to correctly return altitude above ground. 2012-07-17 16:15:11 +10:00
Andreas M. Antonopoulos b03e424fda AP_Limits: Configuration defaults moved to config.h. Fixed AP_LIMITS==DISABLED handling. 2012-07-16 11:46:43 -07:00
Michael Oborne b97f9bb803 Airspeed Library - fix param names. 
The Group definition give the start of the param name.
This way we can maintain multiple instances if required of the same library as options.
 2012-07-16 21:48:47 +08:00
Michael Oborne 2ccb6a281e Planner 
missed files
+ cleanup old binarys
 2012-07-16 21:43:49 +08:00
Michael Oborne f48e86747f APM Planner 1.1.98 
Modify BackStage View - will change again soon
modify target alt calc
change order on param lists
remove old firmware selection dialog
add hil mod flag to hil connect
implement main switcher - will change again soon
change some invokes to async, to prevent other threads slowing.
fix mavlink log graphing error
modify help text
general mono for mac fixs - still combating https://bugzilla.xamarin.com/show_bug.cgi?id=3124
 2012-07-16 21:37:35 +08:00
Andrew Tridgell ead41670c4 Airspeed: change APM to use new AP_Airspeed library 
the next step is AHRS dead reckoning
 2012-07-16 11:21:50 +10:00
Andrew Tridgell dfb22554aa Airspeed: Added AP_Airspeed sensor library 
this will allow an airspeed sensor object to be passed to AHRS for
dead reckoning
 2012-07-16 11:21:20 +10:00
rmackay9 bec5321b8b AP_MotorsMatrix: small bug fix to limit checking on remove_motor call. Fix thanks to Michael Peschel! 2012-07-16 00:38:58 +09:00
Michael Oborne 6fe0882809 AC fix limits param gen header 2012-07-15 18:23:06 +08:00
rmackay9 f7bb7667a1 ArduCopter: removed unused config for CAM_ROLL_GAIN and CAM_ROLL_PITCH now in AP_Mount library) 2012-07-15 16:38:52 +09:00
rmackay9 9276c68f80 ArduCopter: added enable_out_ch and output_ch calls for rc_camera_roll, pitch and yaw servos so they actually move 2012-07-15 16:38:28 +09:00
rmackay9 f137f51ec0 ArduCopter: restored set_range calls for RC_Channels 5 ~ 8. 2012-07-15 16:37:40 +09:00
rmackay9 0dc0e3801c ArduCopter: reverted channel 5~8 to be regular RC_Channel objects, restored rc_camera_roll and rc_camera_pitch RC_Channels and created new rc_camera_yaw RC_Channel to control the camera mount servos. 
Defined camera_mount (MNT_) in Parameters.h and Parameters.pde so that it appears in global parameters list.
Removed unused camera_*_gain and camaera_*_continuous parameters.
 2012-07-15 16:36:05 +09:00
rmackay9 46a44a6b1b ArduCopter: added definition for yaw channels. 
APM1 uses channel 11 for camera's yaw servo, APM2 uses channel 8.  This should allow all frame types except octacopters to potentially use a 3 axis camera mount.
 2012-07-15 16:31:23 +09:00
rmackay9 3b9a1d4305 RC_Channel_aux: added enable_out method to help stop servos from moving before the mount has initialised. 
changed parameter names of "update_aux_servo_function" to make it more clear that any 4 servos can be passed in (not just servos 5~8).
Also allowed NULL servos to be passed in as parameters because we only need 3 in ArduCopter.
 2012-07-15 16:28:53 +09:00