Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
17,660 Commits 71 Branches 509 Tags 731 MiB
Commit Graph

133 Commits

Author SHA1 Message Date
Julien BERAUD 3cf952d1f8 AP_InertialSensor: add fifo support for MPU6000 
And remove the use of data rdy in this case
 2015-07-10 14:24:09 +10:00
Julien BERAUD 8a76ff53bd AP_InertialSensor: add i2c bus driver for MPU6050 2015-07-10 14:24:09 +10:00
Andrew Tridgell ac3200fd32 AP_InertialSensor: make max_abs_offsets a single float, not a vector 2015-06-30 10:51:43 +10:00
Gustavo Jose de Sousa 42eb73a1d1 AP_InertialSensor: add LSM9DS0 backend 
This adds the backend driver for LSM9DS0. This implementation is based on the
legacy driver coded by Víctor Mayoral Vilches (under folder LSM9DS0) and makes
some necessary adaptations and fixes in order to work properly. The legacy
driver folder was removed.
 2015-06-30 10:27:46 +10:00
Gustavo Jose de Sousa c340e072f2 AP_InertialSensor: use accel instance max abs offset instead of a constant value 
The calibration on LSM9DS0 was giving offsets between 4.0 and 4.2 on x-axis and
around 3.6 on y-axis. It turned out that those offsets were actually right.

The maximum absolute values of calibration offset should be a sensor
characteristic rather than a constant value for all sensors.

The constant value previously used (3.5 m/s/s for all axes) is set here as a
default maximum absolute calibration offset for every instance to keep it
working.
 2015-06-30 10:27:44 +10:00
Andrew Tridgell bc0ae630a1 AP_InertialSensor: always provide delta_velocity and delta_angles 
this makes the NavEKF code simpler
 2015-06-17 13:10:26 +10:00
Andrew Tridgell 727be87d84 AP_InertialSensor: support HIL functions for delta_velocity and delta_angles 2015-06-16 09:53:55 +10:00
Randy Mackay 8ceccd778d InertialSensor: disable vibration checks on APM2 
Also bug fix get_accel_clip_count's instance check
 2015-06-12 21:36:56 +09:00
Randy Mackay 0db7acc628 InertialSensor: calc vibration and accel clipping 2015-06-12 21:36:22 +09:00
Andrew Tridgell 6a2c585632 AP_InertialSensor: fixed build warnings 2015-05-30 22:51:19 +10:00
Andrew Tridgell aaa35bd1ec AP_InertialSensor: using atan2f() gives more accurate euler corrections 
thanks to Jon and Paul!
 2015-05-16 08:19:18 +10:00
Andrew Tridgell 9e723ef907 AP_InertialSensor: added calibrate_trim() function 
used for redoing trim calculation
 2015-05-16 07:56:34 +10:00
Andrew Tridgell b564ba0868 AP_InertialSensor: fixed AHRS_TRIM calculation again 2015-05-16 07:56:33 +10:00
Jonathan Challinger 159599879f AP_InertialSensor: simplify and correct AHRS_TRIM computation 2015-05-15 21:03:03 +10:00
Randy Mackay 1f14eec4ea InertialSensor: accel_calibrated_all_ok replaces calibrated 
This checks that the current number of accelerometers matches the number
of calibrated accels in order to catch accel failures at boot
 2015-05-12 16:32:16 +09:00
Andrew Tridgell 8bf2baef70 AP_InertialSensor: fixed primary accel/gyro in replay 2015-05-11 11:19:11 +10:00
Andrew Tridgell 7d90033a36 AP_InertialSensor: support raw accel and gyro dataflash logging 2015-05-07 12:08:30 +10:00
Andrew Tridgell 089e63f987 AP_InertialSensor: fixed PSTR handling 
must use PSTR on code compiled for AVR
 2015-05-05 13:54:00 +10:00
Andrew Tridgell e6a8a6da07 AP_InertialSensor: revert AP_Math class change 2015-05-05 13:27:06 +10:00
Tom Pittenger 9e98c68099 AP_InertialSensor: compile warnings: format not a string literal, argument types not checked 
PSTR() goofs things up when using hal.console->printf_P()
 2015-05-05 13:27:01 +10:00
Tom Pittenger 820199635b AP_InertialSensors: compiler warnings: apply is_zero(float) or is_equal(float) 2015-05-05 13:26:51 +10:00
Tom Pittenger 3cb2221315 AP_IntertialSensor: double to float warning 2015-05-05 13:26:50 +10:00
Randy Mackay 6773c0b232 AP_InertialSensor: default primary accel and gyro 2015-05-01 16:37:33 +09:00
Tom Pittenger a4b8575432 InertialSensor: fix compile warnings re float constants 2015-04-24 14:03:49 +09:00
Andrew Tridgell 45e016ea5b AP_InertialSensor: check for zero delta_velocity dt 2015-04-03 15:10:47 -07:00
Jonathan Challinger b306d7a356 AP_InertialSensor: accel cal sample for 400ms instead of 1s 2015-04-03 14:54:19 -07:00
Jonathan Challinger 1e1d8efa22 AP_InertialSensor: use expected update rate for accel cal sampling 2015-04-03 14:54:17 -07:00
Jonathan Challinger bd84328440 AP_InertialSensor: hack to "reset" the accel filter before taking a cal sample 2015-04-03 14:54:15 -07:00
Jonathan Challinger b2b42e081a AP_InertialSensor: use delta_velocity/dt for calibration if available 2015-04-03 14:54:10 -07:00
Andrew Tridgell 4147825b87 AP_InertialSensor: fixed gyro calibration bug 
we must not update _gyro_offset[] until we have completed calibration
of that gyro, or we will end up using the new offsets when asking for
the raw gyro vector
 2015-04-03 06:57:30 -07:00
Andrew Tridgell cf2445dc97 AP_InertialSensor: prevent nested accelerometer calibration 2015-03-15 15:22:59 +11:00
Andrew Tridgell 8a99cab535 AP_InertialSensor: load only HIL backend for hil_mode 2015-03-13 22:52:55 +11:00
Andrew Tridgell 07fd31c724 AP_InertialSensor: change copter filters to 20Hz 
with the backend filters disabled 20Hz is closer to the old default of
30Hz
 2015-03-12 13:11:17 +11:00
Andrew Tridgell 3d7d46b9b0 AP_InertialSensor: replaced INS_MPU6K_FILTER with INS_ACCEL_FILTER and INS_GYRO_FILTER 
this allows filtering to be set separately on accels and gyros where possible
 2015-03-12 12:50:31 +11:00
Andrew Tridgell f3314791f2 AP_InertialSensor: removed INS_CALSENSFRAME 
it is no longer needed as we have shifted the accel cal indexes
 2015-03-12 12:50:31 +11:00
Andrew Tridgell 4bc6c8e655 AP_InertialSensor: shift to new parameter indexes for accel calibration 
this allows for users to switch between development trees and previous
stable versions while retaining their accel calibration values.
 2015-03-12 12:50:30 +11:00
Andrew Tridgell e6a4b9f68c AP_InertialSensor: check accel health during accel cal 2015-03-12 12:50:29 +11:00
Andrew Tridgell 875339f12a AP_InertialSensor: try to avoid a compiler fault in travis 2015-03-12 12:50:29 +11:00
Andrew Tridgell 786172aa4e AP_InertialSensor: removed 1D accel calibration 
it is finally time to move on from this. We want to push people
towards better calibration and removing the 1D accel cal is the first
step
 2015-03-12 12:50:28 +11:00
Andrew Tridgell a975520033 AP_InertialSensor: check range of accels in 3D calibration 
during 3D accel cal it is possible to get data which passes the sphere
fit but which has very poor coverage and does not provide sufficient
data for a good result. This checks that each axis covers a range of
at least 12 m/s/s in body frame
 2015-03-12 12:50:28 +11:00
Andrew Tridgell a8a8628515 AP_InertialSensor: added INS_CALSENSFRAME parameter 
this allows us to detect if accel calibration was done in sensor frame
or not. If it was done in sensor frame then the accel calibration is
independent of AHRS_ORIENTATION, which makes it easier to move a board
to a new airframe without having to recalibrate.
 2015-03-12 12:50:28 +11:00
Jonathan Challinger 2a547f329b AP_InertialSensor: allow backends to publish delta velocities and angles 2015-03-12 12:50:27 +11:00
Jonathan Challinger 155c173ed1 AP_InertialSensor: rename _rotate_and_offset to _publish 2015-03-12 12:50:27 +11:00
Randy Mackay 5f26a36060 INS: protect against two calibrations running at the same time 2015-03-09 17:58:38 +11:00
Randy Mackay f9c6e35d19 INS: add calibrating method 2015-03-09 17:58:38 +11:00
Randy Mackay b0e7990c90 INS: set gyro_cal_ok only after completing calibration 2015-03-09 17:58:37 +11:00
Andrew Tridgell aec7907571 AP_InertialSensor: updated comment on accel check in gyro cal 2015-03-09 17:58:36 +11:00
Andrew Tridgell 38bde56523 AP_InertialSensor: continue finding best gyro after convergence 
with multiple gyros if we are still calibrating one of the gyros then
keep looking for better values for the already converged gyros.
 2015-03-08 07:49:38 +11:00
Andrew Tridgell 20a4c98bac AP_InertialSensor: use accelerometers to prevent bad gyro cal 
if the board is rotating at a steady rate we can end up with a bad
gyro calibration. This can happen on a steadily moving platform such
as a ship.

This uses the accelerometers to detect the steady movement and not
accept the gyro calibration
 2015-03-08 07:48:16 +11:00
Randy Mackay b650d39786 InertialSensor: remove product_id set to zero 2015-02-21 09:14:33 +09:00