Andrew Tridgell
7e4d4b07c3
Rover: change PX4 main baud rate back to 115200
...
we now use USB console
2013-02-22 07:03:52 +11:00
Andrew Tridgell
f1ff27ed08
Rover: major restructuring
...
this removes a lot of the old arduplane code, and renames a lot of
variables.
This will need a lot more testing and fixup before being usable
2013-02-08 09:21:22 +11:00
Randy Mackay
bb21194fd7
Rover: CUR and CURR renamed to CURRENT in dataflash
...
Based on user complaint re inconsistency of disabling/enabling and
output in dataflash
2013-01-26 17:41:38 +09:00
Randy Mackay
7bfe659626
Rover: rename RAW dataflash message to IMU
2013-01-26 17:35:18 +09:00
Andrew Tridgell
0b03df4e69
Rover: run serial0 at 57600 on PX4
2013-01-22 09:50:12 +11:00
Andrew Tridgell
583ec2b236
Rover: fixed PX4 mag orientation
2013-01-17 17:23:34 +11:00
Andrew Tridgell
ef35aa63ce
Rover: port rover code to PX4
2013-01-02 22:14:35 +11:00
Andrew Tridgell
fc953588e1
Rover: allow rover to build on APM1-1280
2012-12-22 13:21:34 +11:00
Andrew Tridgell
45615e5698
Rover: merge in mavlink updates from ArduPlane
2012-12-20 14:52:35 +11:00
Andrew Tridgell
235369cfbc
Rover: cleanup board config
2012-12-20 14:52:35 +11:00
Andrew Tridgell
b284d4c21e
Rover: first cut at porting rover to AP_HAL
2012-12-20 14:52:34 +11:00
Andrew Tridgell
2bca51ed0f
Rover: changed default WP radius to 2m
2012-11-28 09:35:42 +11:00
Andrew Tridgell
691d19dd98
Rover: more cleanup, and fixed navigation code
...
removed loiter code
2012-11-28 09:35:42 +11:00
Andrew Tridgell
a16ba57467
Rover: cleaned up a bunch more plane cruft
...
removed elevon and flap support
2012-11-28 09:35:42 +11:00
Andrew Tridgell
f3c077b76d
Rover: fixed SITL build
2012-11-27 21:49:45 +11:00
Andrew Tridgell
54a722158a
Rover: fixed cliSerial and clean out more gunk
2012-11-27 21:47:30 +11:00
Andrew Tridgell
16b5b00368
Rover: removed inverted flight support
2012-11-17 18:03:17 +11:00
Andrew Tridgell
abc0a1cd38
Rover: major update, fixing lots of bugs
...
This removes a lot of the ArduPlane specific cruft left over from the
initial Rover import from ArduPlane, plus fixes a bunch of serious
bugs. For example, the rover was unable to use either compass or gps
for heading - it used just gyros!
There is still a lot of cruft left, but this at least gives a bit
better basis for future work
2012-11-17 17:45:30 +11:00
rmackay9
e877a58b60
APMRover: fixes to incorporate accelerometer calibration
2012-11-07 19:21:20 +09:00
rmackay9
fcb2ff19bc
APMrover2: fixed build
...
Needed to remove references to MPU6000's CS pin in constructor
2012-09-29 13:55:29 +09:00
Andrew Tridgell
97aa98015d
Rover: added TELEM_DELAY to rover code
2012-08-30 09:36:18 +10:00
Craig Elder
4ad516c445
Arducopter: increased MAVLINK delay to 6s to reduce the chance of xBee bricking
...
Arduplane: increased MAVLINK delay to 6s to reduce the chance of xBee bricking
Ardurover: increased MAVLINK delay to 6s to reduce the chance of xBee bricking
2012-08-28 20:09:10 -07:00
Andrew Tridgell
6d11940ada
AHRS: removed Quaternion build support from APM/ACM/rover
2012-08-22 10:42:21 +10:00
Robert Lefebvre
10b5d758f8
Changed software ID from 0 to 20 for ArduRover V2 Divergence.
...
Also changed definition of flight mode 2 from Stabilize to Learning.
2012-05-14 15:21:29 -04:00
Jean-Louis Naudin
4a4402556b
APMrover v2.1.3 :
...
Added option (hold roll to full right + SW7 ON/OFF) to init_home during the wp_list reset
Add ROV_SONAR_TRIG (default = 200 cm) - tested by Franco
Restart_nav() added and heading bug correction, tested OK in the field
RTL then stop update - Tested OK in the field
Added SONAR detection for obstacle avoidance
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-05-14 17:47:08 +02:00
Jean-Louis Naudin
899e6e66b0
APMrover v2.0c - tested with APM v2 full kit (Oilpan) - dualversion (IMUless + IMUfull)
...
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-05-09 07:12:26 +02:00
Jean-Louis Naudin
77eea3a893
APMrover v2.0 - tested on Traxxas Monster Jam Grinder XL-5 3602
...
Signed-off-by: Jean-Louis Naudin <jlnaudin@gmail.com>
2012-04-30 09:17:14 +02:00