Peter Barker
901045b029
Rover: move common mission handling up to GCS_MAVLINK
2017-07-11 23:45:17 +01:00
Peter Barker
2692ee22d3
Rover: eliminate gcs_send_mission_item_reached wrapper
2017-07-11 23:45:16 +01:00
Peter Barker
130ad52a22
Rover: eliminate gcs_send_message wrapper
2017-07-11 23:45:16 +01:00
khancyr
b28656eb11
Rover: reoder rc and servo init
2017-07-10 19:48:35 +09:00
Randy Mackay
774e484869
Rover: remove servo channel failsafe from vehicle code
...
This is now handled by the MotorsUGV library
2017-07-10 10:37:14 +09:00
Randy Mackay
6464bfb601
MotorsUGV: set failsafe output
...
This informs the I/O board to stop sending pwm if the I/O board loses
contact with the main CPU
2017-07-10 10:37:12 +09:00
Peter Barker
9509f7f1bf
Rover: use send_text method on the GCS singleton
2017-07-09 17:17:29 -04:00
Peter Barker
7ad003a211
APMrover2: use Notify singleton for sending statustext
2017-07-09 17:17:29 -04:00
Randy Mackay
03d04c934e
Rover: improve skid-steer input processing
...
limit the steering input
reverse commanded steering value if reversing to be consistent with separate steering-throttle frames
2017-07-08 16:07:13 +09:00
khancyr
f8a564f283
Rover: rename BRUSHEDPLUS to BRUSHEDBIPOLAR
2017-07-08 16:07:13 +09:00
khancyr
8ab3e83a3c
Rover: use float qualifier and functions
2017-07-08 16:07:13 +09:00
khancyr
1f0c985dec
Rover: add setup_servo_output to allow ouput reconfiguration
2017-07-08 16:07:13 +09:00
Pierre Kancir
38dcc2eb12
Rover: minor formatting fix
2017-07-08 16:07:13 +09:00
Pierre Kancir
ba8664193a
Rover: fix failsafe throttle
2017-07-08 16:07:13 +09:00
khancyr
9b97ad0fc0
Rover: solve skid steer in value
2017-07-08 16:07:13 +09:00
Pierre Kancir
f70a2b36ea
Rover: integrate brushless motor support
2017-07-08 16:07:13 +09:00
Pierre Kancir
267a1532b9
Rover: integrate motors library
...
move throttle_slew_limit and THR_SLEWRATE parameter
move have_skid_steering to library
move mix_skid_steering to library's output_skid_steering method
move radio.cpp's output channel initialisation to motor's init method
use motors.get_throttle and get_steering instead of getting from Servo objects
use motors.set_throttle and set_steering instead of setting to Servo object
AP_Arming::arming_required is replaced with SAFE_DISARM parameter
2017-07-08 16:07:13 +09:00
Pierre Kancir
29c59644b7
AP_MotorsUGV: add BrushedPlus motor type
...
BrushedPlus are brushed motors with separate throttle and steering pwm
inputs
2017-07-08 16:07:13 +09:00
Pierre Kancir
76c9d3982a
AP_MotorsUGV: motors lib for Rover
2017-07-08 16:07:13 +09:00
Randy Mackay
1fb6d45d5f
Rover: version to 3.2.0-dev
2017-07-08 12:24:57 +09:00
Peter Barker
cfeb449979
Rover: create GCS subclass, use inheritted methods
2017-07-07 16:18:37 +01:00
Eugene Shamaev
b6c397c85a
APMrover2: move of CAN parameters into separate group
2017-07-03 11:44:32 +01:00
Randy Mackay
1fc85e9a8c
Rover: adjust skid steer motor mixing, fix rotation direction in reverse
...
balanced prioritisation of throttle vs steering when motors become saturated
direction of turning made consistent with normal (ie non-skid-steered) vehicles
Also includes fixes to motor mixing after peer review
2017-07-01 19:48:01 +09:00
Randy Mackay
f036b1f92c
Rover: pivot steering stays active until within 10deg of target heading
...
Previously the vehicle would pop out of pivot-steering once it was within PIVOT_TURN_ANGLE degrees of the target heading. This meant that it would give up on the pivot steer long before it was actually pointing at the target.
2017-07-01 19:48:01 +09:00
Peter Barker
4646eb3b95
Rover: check dataflash to see if we should log backend gps messages
2017-06-29 15:43:38 +01:00
Peter Barker
dcad79bdef
Rover: use DataFlash should_log to determine raw IMU logging
2017-06-29 15:26:27 +01:00
Peter Barker
8697faa44f
Rover: move should_log check of log bitmask into DataFlash
2017-06-29 15:26:27 +01:00
Randy Mackay
351b37fc31
Rover: only report system status after init has completed
...
This reduces errors reported to the GCS during startup
2017-06-28 11:32:01 +09:00
Georgii Staroselskii
eed08fb8cd
Rover: cork and push servo outputs
...
SRV_Channels API makes it easy to sync all PWM channels at once. This is
the support needed for it to work properly on Rovers.
2017-06-27 11:46:41 -07:00
Peter Barker
3a85d8ed39
Rover: handle knowledge of in_log_download in DataFlash
2017-06-27 03:10:43 +01:00
Peter Barker
689a5cb238
Rover: move send-logs-via-mavlink code into DataFlash
2017-06-27 03:10:43 +01:00
Pierre Kancir
c865972e9c
Rover: remove skid_steer_out parameter
2017-06-24 13:17:36 +09:00
Pierre Kancir
0017485ee7
Rover: move failsafe_trigger from system to failsafe
2017-06-24 13:17:35 +09:00
Pierre Kancir
9abb1f634f
Rover: add comments to Steering
2017-06-24 13:17:33 +09:00
Pierre Kancir
031ed4bbb0
Rover: Remove old skid steering
2017-06-24 13:17:33 +09:00
Pierre Kancir
41e18f089e
Rover: remove g.skid_steer_out in favor of have_skid_steering()
2017-06-24 13:17:32 +09:00
Pierre Kancir
1dcf90c161
Rover: use scaled input in Manual modes
2017-06-24 13:17:26 +09:00
Pierre Kancir
ee28e49790
Rover: steering mark floats as float and fix parenthesis
2017-06-24 13:17:10 +09:00
Pierre Kancir
97595f98ac
Rover: add comments to scheduler
2017-06-24 13:17:05 +09:00
Pierre Kancir
ef2c2e4afc
Rover: add some comments in radio
2017-06-24 13:16:59 +09:00
Pierre Kancir
feb8c30af4
Rover: move rssi.init and set_control_channels
2017-06-24 13:16:54 +09:00
Pierre Kancir
7595ffb8ba
Rover: set correct safety limit
2017-06-24 13:16:48 +09:00
Pierre Kancir
32dc59baec
Rover: fix throttle slew limit for skid steer out
2017-06-24 13:16:40 +09:00
Andrew Tridgell
2e24c35906
Rover: setup default esc scaling
...
for rovers without a k_throttle channel we need a default ESC scaling
value
2017-06-21 10:30:39 +09:00
Andrew Tridgell
d060fd2826
Rover: replace get_output_norm*100 for throttle with get_output_scaled
...
No functional change
2017-06-21 10:30:39 +09:00
Andrew Tridgell
79f7cc5779
Rover: implement new style skid steering
...
use throttleLeft and throttleRight servo functions. This gives much
greater flexibility and control over motor trims and limits
2017-06-21 10:30:39 +09:00
Michael du Breuil
57c9afb77e
Rover: Handle NAV_CONTROLLER_OUTPUT.wp_dist overflowing
2017-06-20 15:41:50 +01:00
Pierre Kancir
8a85b8be4c
APMRover2: correct usage of set_output_pwm
2017-06-20 15:58:33 +09:00
Peter Barker
900f0cc774
Rover: move MAVLINK_MSG_ID_REMOTE_LOG_BLOCK_STATUS handling up
2017-06-17 15:07:48 +01:00
Peter Barker
aeacc11573
APMrover2: stop using in_mavlink_delay as a proxy for disabling logging
2017-06-16 17:07:48 +01:00
