Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
11,990 Commits 71 Branches 509 Tags 756 MiB
Commit Graph

130 Commits

Author SHA1 Message Date
Randy Mackay 5d20594fa4 AC_WPNav: bug fix for loiter and waypoint update rate 
Thanks to EmileC for spotting this
 2014-05-12 20:13:46 +09:00
Randy Mackay badc127c34 AC_WPNav: fix example sketch 2014-05-08 16:25:13 +09:00
lthall 9ab9eaec25 AC_WPNav: Loiter jerk default to 10m/s/s/s 
Pair programmed with Randy
 2014-05-08 16:16:05 +09:00
Randy Mackay 1cb297580f Copter: reduce Circle init twitch by using stopping point 2014-05-08 16:15:57 +09:00
Randy Mackay 091ff91a70 WPNav: add wp_and_spline_init to set speeds an init pos controller 2014-05-08 16:15:50 +09:00
Randy Mackay 48ec0caf75 AC_WPNav: run navigation at 10hz in SITL 2014-05-08 16:15:44 +09:00
lthall b38c484874 AC_WPNav: add LOIT_JERK parameter 
Limit accel output from loiter controller.
Call new pos_control.init_xy_controller when loiter starts
Remove sudden stop when pilot requested acceleration is zero

Pair programmed with Randy
 2014-05-08 16:15:38 +09:00
Randy Mackay fd9f8f571f AC_WPNav: replace inav, ahrs pointers with references 2014-05-08 16:15:26 +09:00
Randy Mackay 7dd366d84e AC_WPNav: init_loiter sets speed, accel before calcing stopping distance 
The stopping distance depends upon the speed and acceleration so these
must be updated first
 2014-04-30 21:46:18 +09:00
Randy Mackay 0103ae2eb0 AC_WPNav: add WPNAV_ACCEL_Z 
Allows configurable z-axis acceleration during missions
 2014-04-30 21:46:12 +09:00
Randy Mackay 510c9920a6 AC_WPNav: rename get_horizontal_velocity to get_speed_xy 
This new method name is consistent with the equivalent in the
AC_PosControl class
 2014-04-30 21:46:06 +09:00
Randy Mackay db51d37071 AC_WPNav: add clear_pilot_desired_acceleration 
This allows quickly clearing out the pilot desired acceleration for
loiter contoller.
 2014-04-25 14:45:14 +09:00
Randy Mackay ad99918fee AC_WPNav: recalc leash lengths if set_horizontal_velocity is called 
Resolves bug in which do-set-speed allowed reducing the speed during the
mission but not increasing it.
Slow down distance is also recalculated.
Unnecessary call to calc_wp_leash_length removed from
set_spline_origin_and_destination.
 2014-04-24 13:16:08 +09:00
Randy Mackay 46fba47c8e AC_WPNav: slow target point's speed near destination 2014-04-24 13:16:00 +09:00
Randy Mackay 7c02a02bd8 AC_WPNav: reset_I flag moved to position controller 2014-04-23 15:00:14 +09:00
Randy Mackay 4d5b73b968 AC_WPNav: add reset_I to set_loiter_target 2014-04-23 15:00:07 +09:00
Ju1ien 5d0476e522 AC_WPNav: add reset_I to init_loiter_target 2014-04-23 14:59:47 +09:00
Randy Mackay 559a258ede AC_WPNav: bug fix to limit target point from moving beyond leash 
Also pull Z-axis acceleration from position controller instead of using
#define
 2014-04-22 23:05:11 +09:00
Randy Mackay 648787a6c8 AC_WPNav: rename some definitions 2014-04-21 15:06:29 +09:00
Randy Mackay 2167dd7d3e AC_WPNav: update target speed immediately 2014-04-21 14:51:26 +09:00
Randy Mackay d382fa51ee AC_WPNav: run loiter and wp nav at 50hz on Pixhawk 2014-04-21 13:32:02 +09:00
Randy Mackay 72d2712c4e AC_WPNav: integrate update_xy_controller name change 2014-04-21 13:31:58 +09:00
Randy Mackay 966340a02a Circle: integrate update_xy_controller name change 2014-04-21 13:31:57 +09:00
Randy Mackay 94d38ee294 AC_Circle: add get_closest_point_on_circle 
init_start_angle method added to use current heading or position to
decide on initial start angle
 2014-04-16 16:28:04 +09:00
Randy Mackay 60f522a094 AC_WPNav: set_wp_destination to use current target 
Previously we used the projected stopping point if the vehicle had not
reached the destination but this could lead to large jumps in target
position
 2014-04-13 22:42:50 +09:00
Randy Mackay 15da01cf3a AC_WPNav: replace safe_sqrt with pythagorous2 2014-04-01 20:43:45 +09:00
Randy Mackay b15d4379d8 AC_WPNav: use atan2f, make methods const 2014-03-30 23:09:51 +09:00
Randy Mackay d27ca53a9d AC_WPNav: spline sets origin vel to zero when no prev segment 
Issue caught by Michael Oborne
 2014-03-30 15:19:18 +09:00
Randy Mackay 7dfde39e19 AC_WPNav: advance_spline to use dt 2014-03-30 15:02:07 +09:00
Randy Mackay c0458b786a AC_WPNav: check acceleration is non zero 2014-03-30 11:52:44 +09:00
Randy Mackay f0f3688172 AC_WPNav: rounder corners for short spline segments 2014-03-30 11:52:41 +09:00
Randy Mackay 197683d539 WPNav: clean up spline comments 2014-03-29 17:57:47 +09:00
Randy Mackay 24eb195aa3 WPNav: add yaw control for straight line wp nav 2014-03-28 09:23:13 +09:00
Randy Mackay b42b12f7be AC_WPNav: add get_spline_yaw 2014-03-28 09:23:07 +09:00
Randy Mackay e5e71ce371 WPNav: add spline support 2014-03-28 09:22:53 +09:00
Andrew Tridgell 04587efb2d AC_WPNav: fixed example build 2014-03-19 12:14:00 +09:00
Randy Mackay 98bdbb7fed AC_WPNav: set loiter accel to 1/2 of speed 
Bug fix from Leonard.
Also fixed some formatting.
 2014-02-20 21:37:45 +09:00
Randy Mackay 6af705d455 AC_Circle: bug fix for pos target when radius is zero 2014-02-16 13:46:38 +11:00
Randy Mackay bf3effcd10 AC_WPNav: fix example sketch 2014-02-15 06:09:08 +11:00
Randy Mackay fbf8106280 AC_Circle: remove AC_PID include 
This is no longer required with introduction of PosControl lib
 2014-02-15 06:09:08 +11:00
Randy Mackay e86a21a254 AC_WPNav: remove AC_PID include 
This is no longer required with introduction of PosControl lib
 2014-02-15 06:09:08 +11:00
Randy Mackay 9e31f0b985 AC_WPNav: use PosControl accessor 
Saves 2bytes of RAM
 2014-02-15 05:27:50 +11:00
Randy Mackay 598a1b1f43 AC_Circle: use trig values from ahrs 2014-02-15 05:27:48 +11:00
Randy Mackay 64cfcb2308 AC_WPNav: use trig values from ahrs 2014-02-15 05:27:48 +11:00
Randy Mackay 17177adccf AC_Circle: remove debug comment 2014-02-15 05:27:46 +11:00
Randy Mackay 864f64b61a AC_Circle: circle control library 2014-02-15 05:27:40 +11:00
Randy Mackay d4e4620159 AC_WPNav: remove unused PID references 2014-02-15 05:27:39 +11:00
Randy Mackay fc427967ae AC_WPNav: set wp origin to horiz and vert stopping point 
Also bug fix to set pos_control's down speed as a negative number
 2014-02-15 05:27:39 +11:00
Randy Mackay 4cd45e2edf AC_WPNav: remove debug 2014-02-15 05:27:38 +11:00
Randy Mackay 1596d83d02 AC_WPNav: move leashes to AC_PosControl 2014-02-15 05:27:37 +11:00