Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
61,155 Commits 71 Branches 508 Tags 713 MiB
Commit Graph

1207 Commits

Author SHA1 Message Date
Andrew Tridgell aba5ec6854 AP_InertialSensor: added support for writing raw IMU data to a UART 
this is for supporting external visual odomotry systems which need the
IMU data to correctly process image data

# Conflicts:
#	libraries/AP_InertialSensor/AP_InertialSensor.cpp
 2023-11-30 07:05:02 +11:00
Iampete1 eb4e3fc36a AP_InertialSensor: init all notch center frequencies 2023-11-28 18:05:37 +11:00
Andrew Tridgell 483d19f44c AP_InertialSensor: apply stuck gyro fix to all IxM42xxx sensors 
TDK has confirmed this applies to all IxM42xxx sensors
 2023-10-29 08:24:04 +11:00
Andy Piper 7ca2a4da56 AP_InertialSensor: remove ICM42xxx defaults 2023-10-25 19:23:11 +11:00
Andrew Tridgell 2688848cd1 AP_InertialSensor: fixed orientation of batch sampled data 
we need to rotate the data so that FFT displays match the configured
orientation
 2023-10-25 19:23:11 +11:00
Andrew Tridgell 0ebf9e7af5 AP_InertialSensor: pre-fetch instances for use in filter setup 
we use the instance numbers during filter configuration to check if
fast sampling is enabled. We need to ensure these instance numbers
have been setup before the filtering functions get called
 2023-10-25 19:23:11 +11:00
Andy Piper a9e0bf070c AP_InertialSensor: ensure indirect registers are not modified with sensors active on ICM-42688 2023-10-25 19:23:11 +11:00
Andy Piper da0b1402d3 AP_InertialSensor: add high-resolution reads for ICM45686 
enable high-resolution support on all ICM4xxxx sensors
create INS_HIRES_SAMPLE mask
adjust high-resolution sampling for correct byte ordering and depth
correct high resolution scaling on 18bit ICM4xxxx IMUs
control highres via HAL_INS_HIGHRES_SAMPLE
 2023-10-25 19:23:11 +11:00
Andrew Tridgell b6c9ac2569 AP_InertialSensor: added optional FIFO rate logging to invensensev3 driver 
this is useful for tracking down and confirming the stuck gyro issue
on the ICM42688
 2023-10-22 15:09:40 +11:00
Andrew Tridgell 792d8a4cb8 AP_InertialSensor: fix for ICM42688 stuck gyro issue 
these undocumented bits in register 0x4d control the "adaptive full
scale range" mode of the ICM42688. The feature is enabled by default
but has a bug where it gives "stuck" gyro values for short periods
(between 1ms and 2ms):, leading to a significant gyro bias at longer
time scales, enough to in some cases cause a vehicle to crash if it is
unable to switch to an alternative IMU

this fixes https://github.com/ArduPilot/ardupilot/issues/25025
 2023-10-22 15:09:40 +11:00
Iampete1 e35a459090 AP_InertialSensor: call init for harmonic notch params 2023-10-10 08:07:16 +09:00
Andrew Tridgell 6e26f088bf AP_InertialSensor: fixed the error value for BMI088 
the bad value is -32768 not 0xffff (which is -1)

-32768 badly corrupts the low-pass filter, and is what we see in logs
(a large negative spike on all 3 axes)

update to bug fix from:
https://github.com/ArduPilot/ardupilot/pull/23033
 2023-10-08 10:52:27 +11:00
Iampete1 3429276224 AP_InertialSensor: add INS_RAW_LOG_OPT to allow raw logging of post, and pre+post on primary or all gyros 2023-10-03 10:24:58 +11:00
Rhys Mainwaring 732b074bee AP_InertialSensor: update to support esp32 
- Remove whitespace
- Remove instance checks in AP_InertialSensor_NONE timer update

Signed-off-by: Rhys Mainwaring <rhys.mainwaring@me.com>
 2023-09-02 09:43:14 +10:00
Peter Barker baf5d34256 AP_InertialSensor: create define specifically for the developer feature for killing IMUs 2023-06-07 18:23:01 +10:00
Randy Mackay 217ba502ac AP_InertialSensor: SCHA63T comment fix 2023-05-10 17:24:02 +10:00
Randy Mackay 9d9de678a5 AP_InertialSensor: SCHA63T loses unused ret bool 2023-05-10 17:24:02 +10:00
Randy Mackay 7c2a173f30 AP_InertialSensor: formatting fixes 2023-05-10 17:24:02 +10:00
jfbblue0922 458fbb7f90 AP_InertialSensor: add SCHA63T IMU support 2023-05-10 17:24:02 +10:00
David Buzz a896ab9e71 AP_InertialSensor: quieten imu's on esp32 
less noisy

ins debug

imu
 2023-05-02 14:38:03 +10:00
Michael du Breuil b76d6d827f AP_InertialSensor: Factor accel cal in from GCS_MAVLink 2023-04-21 21:33:16 +10:00
Peter Barker 6e1cd839d8 AP_InertialSensor: don't check MINIMIZE_FEATURES when also checking BOARD_FLASH_SIZE 
we have an assertion that no board with >1MB of flash is minimized
 2023-04-15 09:33:35 +10:00
Wu 0f1253b393 AP_InertialSensor: the accel fast-sampling rate of MPU6500 is 4k,not 1k 2023-04-12 15:24:41 +10:00
bugobliterator 13cdc8bda8 AP_InertialSensor: fix hardfault in BatchSampler 2023-04-05 18:22:03 +10:00
Henry Wurzburg 00858dce78 AP_InertialSensor: add buzzer noises 2023-04-05 09:05:14 +10:00
Andy Piper c9382cd221 AP_InertialSensor: HAL_WITH_DSP -> HAL_GYROFFT_ENABLED 2023-03-29 20:49:40 +11:00
Peter Barker 3fada15681 AP_InertialSensor: correct access beyond array in Ins TCal 2023-03-28 21:25:11 +11:00
bugobliterator 866e6672c8 AP_InertialSensor: fix duplicate sensor detection for AUX sensors 2023-03-23 13:53:44 +11:00
bugobliterator fee6f435ea AP_InertialSensor: increase the temp tolerance for INV2 driver for fifo reset 2023-03-23 13:53:28 +11:00
bugobliterator 08bea2fcd2 AP_InertialSensor: move from INS_ top level parameters to INS 2023-03-21 10:04:16 +11:00
bugobliterator 10439cc42e AP_InertialSensor: add support for extra Aux IMUs 2023-03-21 10:04:16 +11:00
Andrew Tridgell 34a52142c8 AP_InertialSensor: added support using the 2nd IMU for heater control 2023-03-15 19:08:53 +11:00
Iampete1 77540dff07 AP_inertialSensor: BatchSampler: add enabled and initalised getters 2023-03-07 10:56:16 +11:00
Andrew Tridgell a0fe53414c AP_InertialSensor: removed the error count on BMI088 0xff data 
this error happens often enough that it is frustrating for users who
can't arm, which just encourages use of forced arming.

logs show this happening at a rate of once every few seconds, which
doesn't impact on the usability of the gyro (which is at 2kHz), but
does prevent arming with this error incremement
 2023-02-28 11:28:25 +11:00
Peter Barker 601c46f7e0 AP_InertialSensor: add gyro bias simulation 2023-02-24 09:21:42 +11:00
Andy Piper 3cca401af8 AP_InertialSensor: calculate backend sample rates on ICM45686 correctly 2023-02-22 18:06:46 +11:00
bugobliterator 5680c411e9 AP_InertialSensor: can check icm45686 RTC_CONFIG reg because reserved value changes 2023-02-22 18:06:46 +11:00
bugobliterator ef9e264919 AP_InertialSensor: set default data rate to 3.2kHz for ICM-45686 2023-02-22 18:06:46 +11:00
bugobliterator b20ffce39d AP_InertialSensor: add soft reset, clkin for icm45686 and other fixes 2023-02-22 18:06:46 +11:00
Andy Piper 727aa02c26 AP_InertialSensor: correct register setup for ICM45686, make CLKIN optional 2023-02-22 18:06:46 +11:00
Andy Piper 4aafb3ab71 AP_InertialSensor: fast sampling for ICM45686 
Fix accel scale on ICM45686
 2023-02-22 18:06:46 +11:00
Andrew Tridgell 18f0fc50d5 AP_InertialSensor: allow enabling of only some ExternalAHRS sensors 2023-01-30 09:22:02 +11:00
Andrew Tridgell 08d420a08c AP_InertialSensor: reject 0xff frames from BMI088 gyro 
a log on a board with a BMI088 seems to show that this happened
 2023-01-24 11:16:39 +11:00
Andy Piper bd05b548a7 AP_InertialSensor: use freq_min_ratio on notch tune setup 
set harmonics in notch setup
 2023-01-24 10:56:33 +11:00
Andrew Tridgell 645240cc2b AP_InertialSensor: cleanup NAMED_VALUE_FLOAT for fifo error 2023-01-19 15:44:13 +11:00
Andrew Tridgell 786ae7c67f AP_InertialSensor: fixed flood of log with fast fifo reset 2023-01-19 15:44:13 +11:00
Peter Barker e5c3dd871c AP_InertialSensor: create explicit define for AP_INERTIALSENSOR_BATCHSAMPLER_ENABLED 
this allows the batch sampler to be removed for size reasons, or because you don't have logging enabled
 2023-01-11 19:08:41 +11:00
Peter Barker 95527894de AP_InertialSensor: define AP_INERTIALSENSOR_ENABLED in a new AP_InertialSensor_config.h 2023-01-04 18:02:34 +11:00
Iampete1 2e465b4c18 AP_InertialSensor: External: report name in output banner 2023-01-03 10:32:20 +11:00
Peter Barker ee98d75173 AP_InertialSensor: rename HAL_INS_ENABLED to AP_INERTIALSENSOR_ENABLED 2023-01-03 10:28:42 +11:00